New idea of filter

Similar Questions

• I have a new idea called (active safety) and would be happy if I can have apple as my sponsor because the idea is new and I have a great expectations most apple applications will be part of my idea. So who can help? who should I contact at apple?

  I have a new idea called (active safety) and would be happy if I can have apple as my sponsor because the idea is new and I have a great expectations most apple applications will be part of my idea. So who can help? who should I contact at apple?

  Apple does not project sponsor, but you can contact Apple directly here > http://www.apple.com/contact/

• What is the Protocol in the introduction of a new idea of software to the new product division

  my interest is by submitting a new idea of software at your service of new products, I am trying to get protection by copyright for this idea and wish that when the time comes to present this idea to Microsoft, my question is your company works with people outside of Microsoft? I will say that this idea will revolutionize the way people here use computers and cell phones. I live and work in the greater Seattle area, and could if there is an interest to meet your designated company representative to explain how this software would work! Thank you for this time and I look forward to your response have a nice day

  Molotov

  Hi molotov.

  Thanks for posting in the Microsoft Community forum. We appreciate that you want to present a new idea of Microsoft software however, it would be preferable that you contact Microsoft Developer Network to improve assistance about your concern.

  Thank you.

• (Redirected) New idea for all-in-one

  I have a XPS and considering the alternative.   What I see is a monitor with a dock on the back and a laptop that can be anchored and be used as a counter top can be removed and used as a separate laptop.

  I have not seen something similar, but it would be nice.

  Dandmlo

  Hi dandmlo,

  You can repost this on Ideastorm Dell site, where Dell is looking for new ideas.

  http://www.IdeaStorm.com/

• New ideas or suggestions for the flattening of the effects of layer without changing the appearance

  Hi all

  I did a lot of research of ideas on how to make my simpler workflow. I meet regularly with a problem with the layer effects when they are flattened and have been unable to find the right solutions, but I was wondering if any new development came with the new versions of Photoshop that I'm somehow overlooking?

  My main problem is that when I flatten layers in sections or groups (i.e. flatten only 2 layers or more together in a larger composition but not the entire compostion), layer with often methods of fusion flatten strangely. I note in particular that with shadows that I often use one color other than black, generally a shade very dark color applied to the element, the shadow is bunk. For me, it gives a much more realistic and natural look. When I flatten a layer I notice it seems to multiply it mode is stripped shadow FX unless they are flattened with nackground element, so if I used a dark blue, for example, once flattened shadow is now a shade of blue separate which appears to be in normal blending mode. I can put this drop shadow layer to multiply to restore it, but then I have to separate the element shadow of drop on its own layer of the body of the other flattened content otherwise she also well multipoy mode inherits of course, which always leaves me with a layer unwanted to deal with.

  My monetary solutions vary to hide all other layers and visible fusion, which works for some things, but not the problem of shadow drop above, I will keep as things that just don't work on their own layer separate, like the shadow and just let them be if I can. In cases where this is not an option, I even hide all other layers and model the portion of the DSP which has flattened to a separate TIFF or PNG and re-import the PSD. This will sometimes work around the problem and do everything interact as you wish. It's a matter of confectioners, even if it means mental acrobatics everytime to design a workaround solution that I can use for my purposes.

  I need to do often is because I work for a company of web development as a designer. Once the design is sometimes I'm going to cut and prepare it for the web (not a problem when I am doing this because I can leave as a PSD). When the other members of the team as a web developer need access to graphic files if they use Fireworks which means I need a PNG image in layers so they can rip with the software they know while maintaining transparency if necessary.

  I know that some will say just to use Fireworks then but this isn't a desirable for me because I find it very restrictive fireworks on the progress of Fx and graphic manipulation. I am agree that Fireworks can be very capable and can do very nice things when you are thinking about the design of the whole site in general, but it can usually do the fx tip and manipulation that I like to use for parts of 'eye candy' of the site, especially when you use mutiple Fx on a layer with their own blending modes. I think it's more complicated to build a general site in Fireworks and import items of Phoroshop. Follow-up to good design and loading constantly the background images of space reserved for photoshop for reference is not for me!

  I have a pretty decent understanding of functioning of the flattening of the layer and how the merger of modes function (like the fact that you can't have mutiple modes on a single layer, so many problems with blend modes Fx layer fusion). I'm with CS5.5 Design premium and hope that there was some progress in working with this kind of thing. I know that if I could flatten the layer shadow down with the layer she rides that would solve the question well but this is rarely possible on Web sites where you have fluid areas who need to change the size and the image with the shadow element is not always in the same place on the bottom of the site.

  Would be great if, since you have the possibility to apply the individual layer blending modes, if Photoshop could have a setting to somehow flatten the layer effects and layer in it is no self clean process and then place the layer flattened within the PSD as if you imported a transparent image as a TIFF or PNG. That's essentially what I do on the extreme side of tihngs manually if necessary. It would be great if there was a way to automate this type of functionality.

  Anyone know of any new or good method to deal with this sort of thing? Sorry for the long post, I tried to be as detailed as possible, I know, it is sometimes easy to misinterpret what someone asking this type of question. Thank you all for taking the time to read/answer!

  To answer your specific question, do not have a background.  Adobe has established rules for manipulating combinations of layer if there is no pixel backround of first, and you may find yourself quite reasonable with your transparent throughout the image pixels.  If you save an image in PNG format, for example, when a browser renders the image that it will perform its own process to "overlay" and pixels transparent (or partially transparent) won't do not (or only partially change) the colors of the pixels behind the PNG.

  -Christmas

• Can I create new folders and filter emails to them when using folders, unified inbox

  Spent in IMAP and ended up with two inboxes (w8dn & weightdn @...). Switched to records unified to get all emails in one place. I get emails from many of many email lists if you need to create folders and filter emails in the appropriate folder. I can make this as set up or will it return to the POP server?

  Thank you
  Mike / W8DN

  Yes. Local folders account is provided by Thunderbird for just this purpose; a generalized situation of storage independent of the account. The filter is located under Tools | Message filters. Right click on the sender in a message header will also create a filter.

  With Thunderbird, you by default will have a separate set of folders for each account. This way gives you the opportunity to keep separate accounts (some users require) and you can also use the saved searches, Unified files and local files to merge accounts (other users require too!)

• I have a new idea of Zoo Tycoon game! (Microsoft Game Studios)

  I was playing Zoo Tycoon today and I thought of an idea to bring the Zoo Tycoon but better! I tried to go to zootycoon.com and bluefang.com, but they both stopped, I guess because they closed.

  In any case, my idea is to bring the Zoo Tycoon. Here is a list of what I thought:
  1 includes everything in Zoo Tycoon 1 and 2, including all the expansion packs.
  2 mode Guest, where you can walk around as a guest to interact with objects and animals should be included, but you should be able to interact with customers, too. For example, you could go up to a guest, press the SPACEBAR, and have a little chat with them, as to seek their advice on the zoo, their favorite animal, things like that.
  3 Add more animal-like extinct animals, animals (unicorns) Make-Believe, tons of animals!
  4. When you are playing in free play, you should have unlimited money as you do in Zoo Tycoon 2 and have everything unlocked for you, even things that need a cheat code.
  5. There should be a lot more like roller coasters, ferris wheels and rides.
  6. in guest mode, you should be able to interact with objects, as in the slide, you should be able to press the space bar and down actually it.
  7. you should be able to turn into an animal. I know it's a little out there, but think about it! It would add humor to the game! You could run as a lion invited scaring, but even not make them hurt!
  I have many more ideas, but it would take forever to write them all! Comment what you think of this idea to get Blue Fang Games (TM), Microsoft TM and Tycoon (TM) Zoo, game all together again! It's like when I was a little girl and I want to play Zoo Tycoon all the time! It would really bring back memories for many people! Then please comment if you have other ideas or simply to tell me what you think of this idea. I'd like to hear your opinions! Thank you! Bye!

  Hi Audrey,.

  From the description above, you are facing problems with the Zoo Tycoon game.

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Zoo Tycoon: Known game issues
  http://support.Microsoft.com/kb/828786

  Note: Make sure that you reset the computer in normal mode once the diagnosis is complete.

  Let us know the result once you try the steps above.

• the new oil paint filter is not highlighted in my new version of photoshop

  Hi everyone I have just updated my photoshop but the oil filter Marie-Claude is not put highlight how do I fix it

  Hello

  Greetings!

  Is is actually a requirement for OpenCL to oil painting.

  It requires 1.2 OpenCL

  If your graphics card supports OpenCL support, it should work.

  Check in the preferences-> performance than if the graphics card is checked or not.

  Concerning

  Jitendra

• New idea of player

  What I'd like to see... is a hybrid of Clip and rocket. The battery life of the "rocket", the music video form factor. No worries video, Clip-type display, slot microsdhc, clip on the back... If you have kept the small screen as the Clip, you might get a bigger block of type battery Fuze and perhaps create a player to halfway between the 2 size... anyone with me?

  Marvin_Martian wrote:

  Tapeworm wrote:
  What, no batteries AA or AAA, navigation file or AM radio?

  Laughing out loud

  I have never had a player with file navigation, so I don't know if I like it or not. But I'm no. And I have Rechargeable AA and AAA for my remotes (DVD player, VCR, stereo receiver, TV), my camera low range, my gamepad PS2 wireless and my small FiiO E3... that's enough. I'd rather have my wall charger for my Sansas

  What I'd like to see... is a hybrid of Clip and rocket. The battery life of the "rocket", the music video form factor. No worries video, Clip-type display, slot microsdhc, clip on the back... If you have kept the small screen as the Clip, you might get a bigger block of type battery Fuze and perhaps create a player to halfway between the 2 size... anyone with me?

• black screen with cursor, no safe mode, tried everything, need new ideas, please help!

  Windows Vista premium, boots to black screen edition. freezes on crcdisk.sys when you try to start in safe mode. now online and answer all possible solutions, I tried.  many points of view, no response!

  Hello brent383,

  1. don't you make changes to the computer before having this problem?

  Black screen problems are usually caused by display drivers does not not or the material does not.

  You can try the methods below to resolve this issue.

  Method 1:

  Try to start the computer in mode low resolution, as this may be caused if the graphics card is unable to load the drivers.

  a. restart your computer if it is running.

  b. press the F8 key after your computer powers initially.

  c. Once you see the menu Options Advanced, boot you can stop tapping.

  d. use the up/down arrow keys to highlight your selection.

  e. Select the low resolution mode.

  You may need to install the drivers for the graphics card if it works very well in this mode.

  Method 2:

  Because safe mode gets stuck on crcdisk.sys, it seems to me that the problem may be related to the hard drive. I suggest that you run chkdsk on your computer.

  You should try running a Chkdsk on your computer to check if there are bad sectors on the hard disk.

  a. Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  Note: when you receive the press quickly press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  b. Select your language setting, and then click Next.

  c. Select repair your computer.

  d. Select the installation of Windows Vista to be repaired, and then click Next.

  e. under System Recovery Options, select command prompt and type:

  CHKDSK [drive:] [/ p] | [/ r]

  [drive:] Specifies the drive to check.

  / p check even if the drive is not marked dirty, bad.

  /r locates bad sectors and recovers readable information (implies / p).

  WARNING: This could cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Photosmart D5160 randomly disconnects. All of the solutions posted, followed by new ideas?

  Basically, the printer continues to go randomly on and off line. Even when he is online, when I click on the button "print" of the computer, the printer then goes offline! Sometimes it - if you're lucky, but the times are very rare! The printer has not been damaged or something like that and this problem started just by itself. Seems a shame to dump the printer when it actually works.

  I use an iMac G4 PPC running OS 10.4.11. I searched the previous posts on this problem, but none have been resolved. I have followed the steps of troubleshooting HP, reinstalled the drivers, made the 'power brains' a few times, plugged the power directly on the wall (not a surge-protected power strip) and still nothing. I changed the USB and power cables, changed the USB port plugs on, in fact, I did everything suggested. I am quite fit to using a Mac so I've done everything I can think of, such as deleting the prefs etc.. I even tried to use it with my Macbook, and it does the same thing!

  Any suggestions?

  widgets10,

  If you have visited the steps described in this article , it may be time to service the printer (if it isn't give the steps a shot and let us know the result). You can contact technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.

  Good luck!

• What is called Mysearchdial I have on my PC and resumed my search and home page, I CANT GET IT OFF! any new ideas?

  I have a Dell studio 1749 set to update from Windows 7 to windows 8 for Windows 8.1.I finally got almost as if I want and it happened the other day, and I didn't ask for it. It took more than homepage on IE, google chrome, foxfire. I did everything the recovery of what I understand to fix and get off so, but as soon as I open a tab or a window or restart the back. It makes me nervous. I've even considered doing a factory reset, but I can't because it won't let me. He stops to where you need to backup and he said to all my Flash drives are not valid for data or something. Please help me. I live on my PC since I was disabled and I can't afford expensive software and stuff to fix it. There must be a way down for good.

  Such programs are usually installed when you download a program from the internet and install it on your PC. They are delivered with the software installed, and you must be careful during the installation of the programs so that they do not install unwanted programs and toolbars so.
  It's free to download the program below, and click on the "Browser Plugins" tab, then check if "Mysearchdail" is displayed. If so, put a "tick" in the box next to it and click the "Delete" button to remove it.  If not consult the 'Programs' tab and do the same thing.

  
  
  http://www.iobit.com/advanceduninstaller.php

• New ideas for DPS: suggestions of Folio Builder/producer

  1. would be great to introduce a function in the Folio Builder that tells you what items need to be updated - IE: red light / / green light...

  2 -it would be very happy to be able to order the editions Folio producer in the order of flow of work. , IE: question / current at the top.

  3 it would also be very happy to be able to 'hide' previously published by -not necessary for them to be visible at 100% of the time. A kind of accordion drop-down menu format.

  4 what a option for the Folio work on color? Faster and easier access for everyone to see.

  5 would be great to copy one sheet to a different account DPS in the same business account. Special, models numbers, ads, etc. As opposed to "share."

  6 what will be in to view pages long scroll (ie: more than 1024 depth) in preview Content Viewer mode? Currently, they scale to fit at the height of the screen. (ie: small width).

  7 how about using keyboard shortcuts in the DPS for the tools of recovery and also Folio Builder? Would make things much more gentle. I know that you can set these but y at - there a chance that this will feature in standard, soon?

  More to come... If you wish.

  See you soon,.

  David

  Please submit your feature request on the link below that goes to our management team of DPS for review https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• I have Photoshop CS6, 64-bit: is it possible to get the new flame CC generator filter in CS6?

  I heard about this new CC flame filter, I guess.  Is there anyway that I can get this filter?  I really like what I hear about it.

  No, unless there is a third-party effect.

• I have an idea for how to contact apple

  I don't know how to inform apple of a new idea that will change the game.

  http://www.Apple.com/feedback/