New iMac with El Capitan blocks the first export

Similar Questions

• How to properly install Adobe Creative Suite Design Standard (clouds pre-creative days) on the new imac with nothing other than the serial number

  I have cs6 Adobe Creative Suite Design Standard installed on my old macbook OLD pro (2007), and I need to also install this on my NEW imac (2015) as 2nd device. This product from adobe has been correctly registered in December 2012. I don't have the original installation CD (more there is no CD drive on these new devices in any case). I saw several download links, but I don't know which is correct (or if this is even the correct step). HOW to properly install my Adobe Creative Suite Design Standard on my new imac with nothing but my serial number? All I have is my online registration.

  (I'm even ready to uninstall the product on my older unit if it this will make easier, but as I get more than 1 my 1 license installation, I intend to proceed at the same time)

  Thank you!

  Just install it and activate it with your serial number (if it is compatible with your new operating system).

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• New iMac with El Capitan gel

  I bought a new iMac 21.5 3 months ago, with an upgrade to 16 GB of RAM.  Within the first week, he started to run slowly and kept freezing.  It got worse as the weeks went by.  I got to my local Apple store where a diagnostic equipment is made, no defect found.  The Genius Bar offers a complete re-installation of software, which has been done.  The iMac continues occasionally to run slowly when on the Internet with Safari (it is better to use Firefox) and freeze until almost every day, the only way to make it work again is to turn it off and on again, by using the power button.  For the record - I have not downloaded any software Mac cleaning or similar, or any other software/applications that have been suggested elsewhere that can cause this problem.

  Has anyone else had this problem and found a solution?  After 20 years of using Mac, I'm about to take this iMac back for a full refund, after losing confidence in this particular product.  I have to say that all my previous iMac has worked flawlessly.

  I am convinced that el Capitan is the problem.

  Matchless350 wrote:

  The iMac continues occasionally to run slowly when on the Internet with Safari (it is better to use Firefox) and freeze until almost every day, the only way to make it work again is to turn it off and on again, by using the power button.

  1. Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  2 remove the test and com.apple.Safari.plist file.

  Empty the trash.

  Quit all applications.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Preferences > com.apple.Safari.plist

  Right-click on it and select "place it in the trash.

  Close the Finder window.

  Turn it back on.    Restart Safari.

  If this does not help, "put back" the com.apple.Safari.plist

  Right click on the trash icon in the Dock, then select 'open '.

  Right-click on the com.apple.Safari.plist and select 'Put Back'.

• Can I migrate my 3rd party applications on my mac pro with a new IMac with El Capitan Lion?

  I have many obsolete applications (Final Cut Pro 7 etc.) and applications 3rd party (Ms Office, final version of the project, etc.).  Can I move ALL of my external hard drive, which is a carbon copy of transfer cleaner everything on my mac pro?

  Yes, but they may be too old to work with El Capitan.  Look at RoaringApps.com to see if there is any inconsistency with these applications.

  

• CS5, installed from a backup does not work in the new iMac w / El Capitan; the discs moved

  My 2011 iMac has a failing hard drive. I downloaded a full backup, including the CS5, in a new iMac running El Capitan. None of the Adobe programs will run, even after I installed Java SE 6 & restarted. A Setup from disks, starting with Acrobat 9 Pro disc and after dragging the applications icon, gave me this: "the operation cannot be completed because one or more required items be found.» (Error code - 43) »

  I deleted programs meeting CS5, rebooted and tried to load again from the disk of Acrobat 9 Pro. After dragging the applications icon, I got this: ' the finder cannot complete the operation because some data in "" cannot be read or written. ". (Error code - 36) »

  Updated his computer at El Capitan my wife and charge of Java SE 6, and his CS5 still works. What can be done in my case? Thanks to all in advance!

  Download from a backup will not work.

  You must install it.

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

  But CS5 wil cause a lot of errors on El Capitan.

  They simply are not (fully) compatible.

  Just search for it on the forum, you will find a lot of threads.

• Why are the 'minor' photos in the new iMac with K5 of the retina (using photoshop)?

  In English

  Hello.

  I met a 'problem' with the new iMac (retina 5K, 27 ", at the end of 2015).

  When I edit pictures in Photoshop, I can't get the images blown up big enough and the fillings of slide show they do not rule out even at a size of 72 dpi and with dimensions of 3000 x 2000.

  What don't I understand?

  Help would be so nice, thank you in advance.

  By Bjarne.

  PA Dansk

  Hej.

  JEG er pa stodt and 'problem' med den nyeste iMac (retina 5K, 27 ', ultimo 2015).

  NAR jeg redigerer billeder I Photoshop kan jeg ikke fa billederne blaest stort nok op og ved diasshow fylder ikke skaermen ud ved en str pa 72 dpi library pa med og selv 3000 x 2000.

  Hvad er det jeg ikke forstar?

  Tants city limit his BRA, pa forhand tak.

  By Bjarne.

  What version of the operating system and Photos do you use? Exactly how do you get pictures of Photos in Photoshop?

  LN

• Why the 66 java update will not install on my iMac with el capitan?

  Why the 66 java update will not install on my iMac with el capitan?

  I recommend that you work with Oracle to see if they are aware of any problems with El Capitan, Java is their product and they would know better. But I was able to find this, it might help you:

  https://oliverdowling.com.au/2015/10/09/oracles-JDK-8-on-Mac-OS-x-El-Capitan/

  BTW, is there a reason you need Java?

• Cannot download the software for CLJ 4600 to the new iMac with OS 10.8.5

  I'm trying to set up my HP CLJ 4600 on my new iMac with OS 10.8.5. The printer is visible when I touched the sign in the menu printing & scanning as a close printer +. When the printer is selected, I briefly a message in which he tries to put in place, then the message "Unable to download the software from the server at this time."

  CLJ 4600 model number is C9660A.

  I'm connected wireless to the internet, and this connection works fine.

  The printer is connected to my iMac via the JetDirect ethernet cable into the printer.

  When it is plugged into my old iMac (10.4.11) via the same ethernet cable, the printer works perfectly.

  You have an idea why I receive the error message, and how can I overcome?

  Thanks for any help you can give!

  Hi Tommymommy,

  I understand that you are unable to download software for CLJ 4600 new iMac with OS 10.8.5.

  Here is a link that will help you.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=74301&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03413323-5%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  It gives you a step by step.

  Please do not hesitate to contact me if you have any other questions

  Thank you

• I have IMac 6 years with Pro CS6 and slow running.  I'll buy a new IMac and want to download the CS6 Pro Flash on the new IMac that do go for it?  I have my serial number, etc.?

  I currently have iMac, with Pro CS6, but it 6 years and running slow.  I'm going to buy a new IMac and want to download the CS6 Pro Flash on the new IMac.  Who should I contact for this?  I have my serial number, etc.?

  Hi byrone23065491,

  You may please check out the link to download professional flash CS6 on the new computer applications download Creative Suite 6

  * Enter the serial number of the product license.

  See also Adobe Creative Suite 6 system requirements

  Hope it will be useful.

• How do I download/install Photoshop and first Elements 10 on new iMac with no disk drive?

  I have one of the new iMacs with no disk drive.  I migrated all the programs/files from old computer to new.  When I try to open Photoshop or Premiere - I get a message stating that the files are missing and reinstall.  How do I with no disk drive?

  I installed initially on the old computer with real disks.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  Photoshop/Premiere Elements 10:

  l http://prodesigntools.com/Photoshop-Elements-10-Direct-Download-Links-PSE-Premiere-pre.htm

• How to put on a new iMac running El Capitan iPhoto?

  I have an iMac 2007 end running Yosemite 10.10.5 with only 4 GB of memory.  It has iPhoto 9.6.1 I downloaded on the App store in late 2014.  I use it extensively for thousands of photos.  I intend to move to a new iMac, or possibly one of the Apple laptops in a month.  There El Capitan.

  Reading these forums, I understand that el Capitan will run iPhoto if it is of a certain version which, I believe, iPhoto 9.6.1 qualifies.  I would also say that the App store in my list of "Bought" an iPhoto to buy in late 2014, this which I think is the version that I use now. I have also some Time Machine backups.

  My question is what would the process of loading the application on the new iMac iPhoto?  After you have configured the new iMac I would go to the App store and download this version (even if it has a button 'Open' However as opposed to a button "Download" next to the iPhoto application); or maybe transfer from a Time Machine backup sort.  Reading these forums, I understand that you must pay attention to setting up a new iMac, that is, that some people have unconsciously converted their libraries to the new 'Photos' and does iPhoto can't go back - al least without too much difficulty.  Also after loading iPhoto on the new iMac how I would get my number (four) iPhoto libraries on the new iMac?

  I realize has 'Photos' will in the future with Apple and that I might convert some time, but at that time iPhoto are perfect for me and am not ready to change right now.

  Thanks for any help

  1. here's how:

  After you have configured the new iMac would be go to the App store and download this version (even if it has a button 'Open' However as opposed to a button "Download" next to the iPhoto application)

  It says 'Open' now that it's on your machine. On the new, he'll say 'download '.

  2. This is not a problem in any form:

  Reading these forums, I understand that you must pay attention to setting up a new iMac, that is, that some people have unconsciously converted their libraries to the new 'Photos' and does iPhoto can't go back - al least without too much difficulty.

  Photos does nothing for an iPhoto library at all. It creates a new version that works for himself, but leaves the completely intact iPhoto library. You just have to worry about this.

  Be absolutely certain that you will have to switch to a new application. Sooner or later, a version of the operating system will come along who are not running iPhoto. Unfortunately, the app is a dead-end.

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• internal mic not working not not on my iMac with El Capitan

  internal mic not working not not on my iMac with El Capitan?

  Please open the sound pane in system preferences and select the Input select the input device (it should be on the list) and move the input volume slider all the way to the right.

  Speak into the microphone. You shouldn't yell. The entry level indicator reacts?

  If not, and if there are other devices of entry in the list, do they work? What is?

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• I've migrated CS4 on my new iMac with Yosemite. How to operate it please?

  I've migrated CS4 on my new iMac with Yosemite.  Can someone tell me please how to run again.

  Reinstall it correctly. Be warned, however. CS4 is not quite officially compatible with Yosemite and even if you get it to install, many things might not work.

  Download the CS4 products

  Mylenium