New internal hard disk will not be installed

Similar Questions

• Internal hard disk is not detected.

  I use two internal hard drives.

  At the same time is 250 GB hard drive.

  One is to WD and other is Seagate.

  WD hard drive is the port sata0 and SEAGATE HDD on sata1 my motherboard port.

  SEAGATE SATA POWER IS CONVERTED TO A PATA TO SATA CONVERTER.

  The WD hard drive has windows... and hard drive SEAGATE has my personal files.

  The SEAGATE hard drive has problems now.

  Sometimes it is detected, sometimes not.

  It does not appear in MY COMPUTER in windows Explorer.

  Sometimes it appears upwards for a few seconds after starting... but then disappears.

  Please HELP me about the same ASAP.

  I'm sorry for the late reply,

  I think that my problem is now solved.

  I think that my HDD SEAGATE wasn't getting good power to operate.

  Both my hdd has 100% health.

  SEAGATE is used only for 8 months and WD is used only a few days.

  Their SMART feature also works perfectly.

  In fact my WD hard drive sharing his power with a fan in my office, but my hard drive SEAGATE shared power

  Thanks to the DVD - RW DRIVE.

  Maybe is was the problem, so I removed the DVD PLAYER connections - RW, it is not operational now.

  I also don't use my DVD PLAYER too.

  But because of that my hdd SEAGATE now works perfectly well from these 2-3 days.

  so, I think, my problem is now solved.

  THANK you all for your help and efforts.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Inspiron 5748, Crucial M500 - "internal hard disk not found".

  My Inspiron 5748 comes with w8.1 pre-loaded onto a standard 500 GB hard drive, but I wanted to move to an SSD. I have two M500s Crucial (the two 2.5 "); one with W7 loaded from another laptop, the other barely taken out of the box.

  With one of them installed, the message at startup after the dell symbol arrives is "internal hard disk not found", and while there is no bootable media found.

  In both cases, UEFI and back diagnonstics reporting tools that there is indeed a crucial m500 present and functional. Both work well in my other laptops (purchased separately).

  Is there a problem of formatting? There is no update available for this SSD firmware.

  Thank you!

  Hi Wazzbot,

  Use the recovery discs Windows 8.1 you prepared using the Dell printer utility to backup and restore Windows loading on the SSD drive. Because the disks are the same size, it should work without problem.

• Autonomous SmartPrint for IE 9 will not be installed. Yes, I downloaded the new version.

  He complains that I have insufficient privileges.  There is only ONE user on this computer and I AM the admin.  So it will not be installed. It is said to connect with admin rights.  There is only one user, so there is no signature in a different way.  I can't even go into properties and change to "run as Administrator" depending on whether the box is grayed out.

  Help, please.

  Windows 7 64 bit

  THAT IS TO SAY 9

  -------------------------------------------------------------------
  It Professional with 30 years of experience
  Windows 7 Professional 64 bit
  THAT IS TO SAY 9

  I ended up HPSPSetup.msi running as a task manager of Windows taskbar and check "create this task with administrator privileges" and installed.

  1 CTRL/ALT/DEL and then "new task" button on the applications tab

  2. Enter the path to HPSPSetup.msi

  3. check "create this task with administrator privileges.

  4. click on OK

  It will install.

• Why uninstall Norton 360 will not be installed at the factory? I'm running a new antivirus

  Why uninstall Norton 360 will not be installed at the factory?  I'm running a new antivirus

  It starts to uninstall (the small circle thang) then stops

  I know that with AVG, you must visit the AVG site to install an uninstall program to remove the program... seems absurd, I know, but that's what's happening with AVG... I don't know if something similar should be done with Norton... but you should be able to disable it... right click that the Norton icon in the tray and you should see options, which will be disable IT are other ways, I don't know, but I haven't used Norton.

• Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk.

  Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk. which drive?

  Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk. which drive?

  Checklist: http://experts.windows.com/w/experts_wiki/89.aspx

  and

  See also:
  http://windows.microsoft.com/en-AU/windows/i-cant-install-microsoft-security-essentials - notes
  Step 6 if it does not work.

  Security Essentials Version: 2.1.1116.0
  Where so you Security Essentials 3 of?

• Cloud creation will not completely install on the new computer.

  Creative cloud will not completely install on my new computer (Mac).  Can someone help me?  I've logged into my account and want to bring my creative cloud subscription programs.

  You must first install the Creative Cloud Desktop App and use it to install the applications. (see the link below to install)

  The links below can help. If you get a specific error, please let us know the details as well as the operating system you are using and what you are trying to install.

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

• I try to install cs5.5 on a new computer, but it will not acceot my serial number

  I try to install cs5.5 on a new computer, but it will not acceot my serial number

  CatB4Adobe wrote:

  3.0 has been on two machines (old) is no longer in use.

  I take that to mean you never turned off the old 2 machines.  If you get stuck.  You must contact customer support via Online Chat.

  Contact the customer service

  Nancy O.

• My Indesign will not be installed on my new computer. He did not recognize the old password of CS2, only the CS5 update password.

  All Adobe Creative suite web premium cs5 has been installed without any problems.

  The Acrobat Pro also no problem.

  What do I need as a number lisens for Indesign when it does not accept the original number of lisens cs2.

  It will not be installed without. What should I do?

  In this case, it is best to contact the Support from Adobe and check with the question.

  Activation server is no longer available for version CS 2. However, check with Adobe customer service, they have certainly you will help accordingly.

  Contact the customer service

  [Click the button still need help and select the Chat option.]

• How to disable the file hiding (changing options for hard disk does not work)

  Hi all

  I hope someone can help me with the following problem:

  -J' need to open a file of 16 GB of content in third party software (Stata) who reads completely in memory.

  -Due to Windows caching file, necessary to get the procedure done about 32 GB cache files and Stata access physical memory.

  -As I have only 24 GB of physical RAM file is read later part of virtual memory, which leads to serious performance problems.

  I unchecked the box 'Enable write on the device cache' to my hard drive. That did not help. Is there a way to disable the Cache during PLAYBACK of files?

  Thank you very much in advance for any help!

  Tobi

  The write cache and virtual memory are different. Virtual memory is an extension of the physical memory residing on the HARD disk where Windows is installed. Normally, the virtual memory is about twice the size of the current physical memory. Write cache is an exclusive setting for external hard drives only and has no effect in internal hard drives.

  In your case, please note that full 24GO of RAM will not be allocated to the program. At least 1 GB will be reserved for windows, so the rest of the programs are moved to virtual memory, which means that the HARD drive. It is not recommended to disable virtual memory because it can cause stability problems. In addition, the files are not copied directly in memory, even if they are big. Instead, the parts of the file are available and this area, including the incremental values and material, are stored in the memory. So if all of a sudden, you access an area of the file which is very far away from the previous location, it takes time as the new area, as well as differentials and material value of a few bytes is also copied to the memory. The box of files previously displayed is erased from the memory.

  For performance improvements, you can go for the SSD, RAM with higher clock speed (must be compatible with the motherboard) as processor as well as the upgrade. However, please note that the process of accessing a file even as mentioned previously, but the speed will increase because of the higher bandwidth and the clock frequency.

• iBook Clamshell detects no no new internal hard drive

  I have an iBook Clamshell (M2453 PC, 300 MHz) and I just replaced the old 6 GB hard drive with a new hard drive 60 GB. The new drive is a regular 2.5 "IDE/PATA drive. I don't know the brand or the rpm of the road, because the seller provides various brands/rpm and I didn't check before installing. I'm guessing this is a Hitachi, Seagate, Fujitsu, etc. either 5400 or 7200 RPM. I don't think that is important, because the drive came in a clean condition and has been formatted. The problem is that when I try to install OS X 10.3 on the new drive hard, it is not detected at all. It does not appear on the screen "Select Destination", the startup disk, or disk utility. Disk utility shows only the OS X install CD, nothing else. I confirm that this isn't for lack of the CD, as I used it many times in the past to install OS 10.3 on other Macs. I tried to reset the NVRAM, PRAM, I even tried the PMU button under the screen, but nothing has worked. However, the old hard drive with OS 9.2 worked perfectly, and I've made sure to connect everything correctly when I replaced the drive, does this mean a new is simply defective, or there at - it another option to try to fix? I don't disassemble the laptop again, but if I have no choice I will do what I must. Thanks in advance.

  If disk utility is not able to detect the hard drive, it could indicate a problem with the drive, the hard drive cable or control circuits in the computer. Disk utility should see at least the reader as such, even if a volume is not displayed.

  As a first step, if you have access to a proper record of the Mac OS (9.x), you can test the configuration of disk utility instead (just to see if the hard drive can be detected at all). Also, disk utility on a PowerPC (https://wiki.ubuntu.com/PowerPCFAQ) to a proper Ubuntu CD version could possibly used for similar drive information research and test operations on your computer.

• Recovery disk will not load on my Equium A210 - 17l

  For some reason, no matter what I do or try, my Toshiba restore disk will not start or load into my disc drive. I hear that many whirring noise and loud clicks, but nothing. I cleaned the disk, I have my BIOS set to boot from the CD/DVD drive. I have the disc, otherwise he would stay all day on a black screen. This leads me into the wall, my laptop is just out of warranty and my games/applications are running slower and slower each day. I can't afford the repairs, I need help! Anyone has any advice for me? Thank you

  * edit *: I forgot to mention, some discs not loading in my laptop but they load fine on my desktop (including my Toshiba restore disk) is anyway I can copy the files to my restore disk and create a new one? (I confess that there are some scratches)

  It is not easy to say what the problem is here. It may be defective recovery DVD or optical disc drive may be defective.
  Try to use some other bootable CD/DVD like Microsoft installations CD or some Linux installations. If any of them work is ODD may be defective.

  Recovery image can be copied to the HARD drive and the new creation of media is not possible. If your recovery media cannot be used due to zero you can order the new copy under https://backupmedia.toshiba.eu/landing.aspx

• Hard drive will not accept any CD or DVD

  I have a MacBook Pro, OS 10.6.8 version.  The hard drive will not accept a CD or a DVD.  Thinking maybe I left a floppy disk in the drive, I tried to eject, but the eject button does not eject anything.  I have not tried to insert a disk for a long time, so do not know how long it could have been a problem without me realizing it. I tried to shut down the computer and restart, but this does not solve the problem.  I did some research using the Apple Hardware Test, but the instructions say insert the Applications install disc 2.  Unfortunately, as I can't insert a disc, I can't deal with the problem in this way?  Any suggestions?

  Have you tried:

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  What happens when you try to insert a disk? The player makes a noise?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• ACER 5515 will not clean install of Win XP or Vista

  I try to put my fully functional level but slow Acer 5515 to use for video capture (use of astronomy)

  I bought a WD 320 GB Black HD that has been initialized, partitioned, formatted, & using the MBR & NTFS option.

  When you attempt to load Win XP laptop an error indicating that, if a new disc or disk drivers have been installed to remove and search for errors or viruses. The player is reported by tools like healthy WD drive and go the SMART controls on my desktop system. The drive is reported when the BIOS loading but does not seem to work after that. Is this a common problem? are there tricks to get the loaded operating system?

  I tried to load win Vista and only got a little further until the system locked up during the completion of the installation, this has happened 3 times.

  The solution to my problem was a hammer book ten...

  Seriously if I had to put the SATA IDE mode, native AHCI vice (tip published in one of the many how to load XP threads) place after everything went well.

  I have now a CLEAN install on a HARD drive bigger, more fast and none of the indigestion of plant to slow down the system.