USB-6341 not on the list of simulation devices
I want to create a USB-6341 siumulated, but this model is not in the list of available under devices simulated in MAX X series devices. I don't see in the devices of series X available for the simulation are PCIe devices. I have MAX 4.7, 9.1.5 DAQmx and LabVIEW 2010. I did this on other computers running older versions of the software and saw this device on the list, so there must be a software component that I have installed, but I can't understand what it is. Any suggestions?
Richard
Material of the series X USB were not released before DAQmx 9.2; you need at least this version in order to use a simulated.
Tags: NI Hardware
Similar Questions
-
Windows controllers USB 8 not on the Device Manager list
Bus controllers series not on the Device Manager list. USB ports not working do not. I tried equipment difficulty and said could not find drivers for multifunction device clicked on fix not found the drivers for it. could use a little help with that.
USB windows 8
Hello
Sounds like hardware and you cannot resolve hardware with the software. Check with the system
Manufacturer of support, their books online, the diagnosis and ask in their forums (if
There are). Or check with a real computer store (one who does on its own in-store service
This brand and model of laptop).Remember that you can not resolve hardware with the software.
=====================================================
Troubleshooting you can try:
Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Windows key + X (or right click in the lower left corner) - (Admin) command prompt
C:\Windows\System32\ >
At the prompt, type in SFC/scannow above
(There is a space between C and /)How to run the command "SFC/scannow" at startup or in Windows 8
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html-----
Then run CheckDisk (chkfdsk/f/r)
File (formerly Windows Explorer)
Right click on drive C: - Properties - tab tools - error checking - Check
Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-driveHow to check a drive for errors with "chkdsk" in Windows 8/8.1
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html-----------------------------------------------
Then lets refresh the USB stack
Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
Devices disabled - look around (with the exception of USB controllers) for your devices (can have
zero or more than one) and top - right click UNINSTALL.Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USBThis KB shows XP how to and methods of Vista and Windows 7 are identical (and
Windows 8/8.1)
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer.
as well as all USB devices that you previously used. Run Options and tick three 1
are there choices to see if any.http://www.NirSoft.NET/utils/usb_devices_view.html
You must remove all instances of the devices and restart.
------------------------------------------------------------------------------------------------
Install USB 3.0 and other USB devices
http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devicesHardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Set up your PC - configure your devices
http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWhat happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly===================================================
If necessary:
Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
settings) or even a restore.Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8/8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8/8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
for hp laptop d008se, boot usb drive not in the sequence of boot in the bios!
I have purched a HP Notebook Laptop (HP D008se) model with Win 8.1 only language X.64 bits.
I want to boot from a USB key, I went to the bios by(ESC+F10) and went to the boot order, but there is no USB drive
only (hard USB, CD/DVD, network, the OS Boot Manager), ok. I did the last Boot order
I put my USB Bootable and press ESC, but my Flah is not in the list.
Please, could say one met my, what I can do to boot from My USB, and is this model not supported USB bootable... it will be a problem for me!
Press the power button then immediately press the ESC key to access the boot menu choose the F10 key to enter the BIOS. Click the System tab and then click start options.
In the start options, enable legacy support option.
Press F10 to save changes and your computer will restart. Make sure that the USB is connected to a usb port. Now you should see the USB in the selectable start options if it is indeed a boot device. If the USB was not bootable you still not see in the list.
-
After the sync iphone list with windowns address file that does not appear the list of contacts
I worked with a technology from Apple to download the latest version of the iTunes Store to be able to backup my IPhone Contact list and synchronize the folder list of addresses of windows on my PC. After sucessful completeion contact list does not display the address of windows. At the far left of the address is an icon showing a shared folder. When you click on it nothing happens. Why can I not see the list of contacts that has been synchronized?
Hi MarkStewart_818,
You can consult the Knowledge Base article mentioned below and check if it helps.
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.Apple.com/kb/HT1692
For any additional help, contact iPhone Support.
You can also ask your question in the discussion forum for iPhone Support.
-
COM3 showing in Device Manager but not in the list of printer port
I have a Datamax Allegoro printer that uses a USB series converter. The poster converter as installed correctly (in devices and Device Manager) and received COM3.
When I go to change the player of the printer to use the COM3 port, it is not in the list. How can I get the COM port appears in the list of printer ports?
Note: this port was already there, but anyway when I was working on some of the settings (I changed the adapter to use COM1 temporarily as a test, then when I went to change it back, it was gone). I tried to uninstall the driver for the adapter and then re-install again, it did not work.
Thank you.
Use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
Good luck.
-
I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?
It is a decision that was made by Apple. El Capitan is the newest OSX that will support a 2009 MBP.
This is not uncommon. My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.
Old hardware ends up by becoming obsolete with newer technology.
Ciao.
-
How to make safari when he is not on the list update available
How to update Safari when he is not on the list of updates?
If you use OS X Lion mountain 10.8.5 as indicated in your signature, the latest version of Safari you might install is Safari 6.2.8 and it is no longer supported.
Your options are to be upgraded to a later version of OS X or use a browser that is still supported. The current version of Firefox is still supported, but which is also coming to an end: https://blog.mozilla.org/futurereleases/2016/04/29/update-on-firefox-support-for - os - x /
-
Entrust G2 root is not in the list of Mozilla's CA certificates
We noticed that Entrust G2 root certificates only are not in the list of Mozilla's CA certificates. We contacted Entrust and they confirmed that the certificates were sent to Google, Microsoft and Mozilla, and there was nothing they could do to solve the problem.
Are there plans to update the list with new root SHA2 certificates? We are having problems with false positives vulnerability and problems due to not having Mozilla do not these certificates in the trust store.
https://www.Mozilla.org/en-us/about/governance/policies/security-group/certs/included/
Hello, the root certification authority should work with mozilla to get these certificates in the store of the browser trusts. This question seems to be tracked in bug # 849950.
-
I can not the firefox window to ask me if I want to remember my password. I'm not in private browsing. The site is not on the list of exceptions in the security zone where all other sites of passwords are stored.
Hello, Web sites can specify whether browsers should be able to save the name of user and password (through the AutoComplete = "off" attribute in the login form in the html source code)-it is often the case when a high level of security is probably held by these sites.
You can either install an addon or use a bookmarklet to work around this restriction.
-
Why can't an iBook on iTunes in South Africa? They promote the iBooks and iBooks author on their Web site, but it seems that SA is not on the list of countries of distribution. Free IBooks are not available. Someone know why? Thank you.
Liz...
According to Apple eBooks aren't yet available > > I can buy on the iTunes Store in my country?
Simply because Apple makes the promotion of iBooks does not necessarily that they are available in all locations.
Sorry!
-
Why not in the list of countries, the Azerbaijan and the Georgia? I am a citizen of Georgia, but currently working and living in Azerbaijan. The absence of these countries created barriers to e-payment. As I said, I currently have in the territory of the Azerbaijan can't use Visa and Master Card and also problem with cards issued in Azerbaijan! What is the reason, can you explain?
Hello
It is a community of support based on the user, though I'm afraid that nobody here can speak you either the reasons for decisions from Apple or whatever plans unannounced Apple (for example, if and when pay Apple will launch in a given country).
If you are wanting to see pay Apple throw in Azerbaijan and Georgia, you can let Apple know here:
-
My country is not on the list of countries iTunes. Now what can I do to buy the app?
My country is not on the list of countries iTunes. Now what can I do to buy the app?
You will not be able to have an iTunes account if/when Apple opened iTunes store in your country, or you move in a country that has an iTunes store - you can not use the store to another country, a part of the terms of the store is to be in a country to use his shop
-
Re: Satellite P500-025 not on the list of upgrade Windows 7
Hi all
Try the upgrade as my new P500-025 (PSPE8A-025002) for Windows 7, but it is not on the list of eligible computers.
http://support.Toshiba-tie.co.jp/Windows7/mlist_au.htm
Can I use this service or are at - it another way that I can upgrade to Windows 7?
Concerning
Ben
Hello
I think the Satellite P500 series is brand new on the market and therefore we forgot to put it on the list
I'm sure that it will be supported! -
Satellite A660 webcam not in the list of devices
A660 PSAW3A-07R00R had for a few years, but cannot use the Webcam because it is not in the list of devices. I downloaded the webcam application several times, with the last V1.1.1.15, but does nothing after extraction.
>.. .but does nothing after extraction
It means that start software install doesn t or what? -
My DEFY music stops after 3 minutes with the music player not on the list end
I have a problem with the way my Defy plays music.
I'm ciau built in music player and it works fine if I listen to it from the widget of the screen, but if I go into the player's menu and manually select a song in the list he stops playing after 3 minutes (once the screen goes black).
It's really annoying as I'm going jogging, I can't listen to the favorite podcast that she stops after 3 minutes. I have to keep hitting the widget button 'next' until I find this podcast to listen to it without interruption.
In addition, music player is not on the list of end in my task manager.
Help...
Maybe you are looking for
-
Please confirm your e-mail address. -Do not work for older account reset and new on just created. Can not yet confirm my e-mail to a new account. Can't even after half an hour. What happened to ask a question without being registered? I can't not com
-
Satellite C870-12F - shaded BIOS settings
Recently, I noticed that I can not change the settings in the BIOS more, almost all of the settings are grayed out. I don't know when it happened, perhaps after update BIOS version 1.6 but it could also happened after the upgrade to Windows 8. I'm no
-
Hi all I think I found a bug in LabVIEW 2012/NOR-RIO 12.0. If I import an Alias of e/s (shared variable) to a CSV file, with enabled scale but without units, I get "System Configuration OR: various failure (Hex 0x80004005)" during the deployment. If
-
Connect VCR to pc with rca cables is not work video do not play on pc
When I plug the 3 rca cables to the back of my pc since the VCR it does not show the video on the pc to the back of the VCR he reads VCR cables are in the band is good, but I get nothing
-
Having a problem with transparency...
So, I'm learning from YouTube tutorials draw this:The problem is that I never get there.What I did with my own shapes to draw. I put the gradient of colors as well.The next step is to change the 'transparency' in "Multiply" and then change the color