Why uninstall Norton 360 will not be installed at the factory? I'm running a new antivirus

Similar Questions

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Cloud creation will not completely install on the new computer.

  Creative cloud will not completely install on my new computer (Mac).  Can someone help me?  I've logged into my account and want to bring my creative cloud subscription programs.

  You must first install the Creative Cloud Desktop App and use it to install the applications. (see the link below to install)

  The links below can help. If you get a specific error, please let us know the details as well as the operating system you are using and what you are trying to install.

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• PSE 13 Win 8.1 will not be installed, "detects the computer restarts" even after the computer restarts

  PSE 13 Win 8.1 will not, install "detects the computer required restarting" even after restarting the computer.

  The Mac version has installed fine on my desktop.  I now want to put the PC version on my laptop.

  Problem solved.  Seems to have been a combination of HP Support Assistant, eager to check updates and Avast2015 are not satisfied with some aspects of the installation.  Ended up uninstalling Avast, installation of PSE 13 and then re - install Avast.

• Java applet will not be installed in the browser

  My VI will not install a JAva Applet. I keep saying "Install Java Applet" and it never prompts for an installation or whatever it is. Any ideas? Is there something I should do that I'm not aware? I've attached a screenshot of the window where is says install.

  I understood the question. Java is messed up on all sorts of ways on my computer. But to answer your question, the site requires java to function and it cannot load java so that it never works.

• C4580 Set - up - will not be installed on the PC XP Home Edition

  Hello

  Happy Thanksgiving all!

  I almost gave up trying to get my C4580 all-in-one installed on my PC XP Home Edition.

  Has anyone else encountered this problem.

  XP won't allow hp imaging to register.

  Message edited by Trentmd001 on 11/30/2008 07:21

  Trentmd001 wrote:

  The MSI.dot4wpt error. hpmiapi.dll will not fit.

  I think that I had your same problem, or at least very similar. The error that I had 'MSI.dot4wrp", not"MSI.dot4wpt ". I sent a detailed cause and solution to HP, but apparently, they don't have it entered into their system.

  Your errors look something like that... http://sites.Google.com/site/hpc4580installproblem/

  The solution was to run "regsvr32 c:\windows\system32\atl.dll" in the window start: run. After that, Setup completed without error.

  After I got the software finally installed and everything works, my C4580 would freeze sometimes every day or so and forcing me to unplug the power cord. It is a separate issue if... http://forums.MacRumors.com/showthread.php?t=571026

  Hope this helps,

  Mark

  Message edited by msmn4393 on 02/12/2008 10:01

• Why my printed document will not be printed in the color I asked:

  I'm trying to print a document in color.  I have asked the color and it will not print - only print in black?

  Hello

  · What is the number and model of the printer?

  · With what application you want to print?

  · This behavior occurs only with this particular document?

  · Do you remember all the recent changes on the computer before the show?

  You can run the patch from the link below: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/

  See also: change an ink or toner cartridge: http://windows.microsoft.com/en-US/windows-vista/Change-an-ink-or-toner-cartridge

• Any ideas why my XPS Viewer will not open saved by the XPS doc?

  I can't open the saved XPS files after my computer recently crashed.

  Hello

  What is the error when you try to open any xps file? XPS Viewer is installed with the .NET Framework 3.0, see (http://windows.microsoft.com/en-AU/windows-vista/What-is-the-XPS-Viewer) to check if it's installed or download from (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=10cc340b-f857-4a14-83f5-25634c3bf043&displaylang=en).

  I hope this helps.

• Games will not be installed by the internet download

  stops the installation when downloading on Internet

  Download the installer to your desktop and right-click on it, and then click Run as administrator.  It sometimes works when standard installation procedures only.

  If this does not work, please transfer your question in the Forum http://social.answers.microsoft.com/Forums/en-US/vistagaming/threads games where people who specialize in the installation of games among other will be more than happy to help you with your problem.  Please post the name and the version of the game you want to install (and a link to the download site) as well as which version of Vista you are using when you post here in order to get the best possible service.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Driver chipset XP will not be installed in the Satellite Pro L20

  Hello

  I recently rebuilt my Satellite Pro L20 to finally give my father in law.
  I installed windows XP home on it and have currently installed SP2.
  When I try to install the software of the chipset of the official region on the Toshiba site he says that my operating system does not meet the criterion even though windows XP is listed in the readme file.

  Please help as this is supposed to be a Christmas gift!

  Thanks in advance

  Rick

  Post edited by: rick_monkey - spelling!

  Hello!

  Have you really downloaded the correct driver? For this model are XP and Vista drivers available so I think that you had to download the wrong driver.

  Try again, maybe the download file is intact. If it doesn t work once again, you can download the driver also from Intel.

  But normally you have a Toshiba Recovery with all the drivers and tools disk. Install from this disc and you have a clean and ready installation.

  Good bye

• Laptop will not reinstall windows after the factory system recovery

  So I have a laptop HP which is relatively new. I recently acquired the Virus 2010 Vista AntiVirus Pro. When the malware and spyware could not fix the problem, I decided to do a system restore, which would put the computer to the way it was when I bought it. I backed up the files and do the system recovery. He filled the recovery then said it will re-start to reinstall windows and complete the process.

  After the restart as it gets and error that says: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "ok" to restart the computer, and then restart the installation. »

  The only option is to click on 'ok', but after clicking it he is trying to reboot once again and the same error comes back. We tried to manually close the laptop and restart, but we always get the same error. I can get the start menu when the information system and the recovery is but to the past is just the mistake. Any suggestions on how to fix it? I don't know what else to do.

  http://welcome.HP.com/country/us/en/contact_us.html

  Problem with the HP recovery process, contact HP at the link above.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows XP does not recognize my DVD players after uninstalling Norton 360

  After uninstalling Norton 360, my Windows XP-based computer does not recognize my CD-ROM/DVD-ROM drives.  Tried to reinstall drivers without success.  Clicking on driver, I get a drive not installed message.  Using the Manager, have uninstalled and reinstalled the drives without success.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Cannot install VIPRE software; Impossible to uninstall Norton 360 (Error 21)

  I had AVG security software uninstalled on my PC running Vista Ultimate. Trying to install Vipre antivirus, to halfway through the installation, I am advised to uninstall Norton 360 (14/09/2008) before the end of the installation.  Trying to uninstall Norton 360 (which I've never installed on my PC), 21 error seems to prevent the elimination of this ghost software...  Using the search tool does not work.   A few days ago I saw the Amazon UK site for the current cost of the Norton 360 for 5th edition.    Anyone have any ideas on how to remove that point of thugs?    Any help would be appreciated.

  Thanks for your suggestions...  Under Program Files (C drive), I traced the supply of the software Norton 360 under "Setup my PC" and deleted these files.  However, looking at the Norton Removal tool seemed a trifle compkicated and may have caused other problems. So instead, I downloaded the FREE Avast internet security software on my Vista PC and no problem.  Also, prevoiusly, I had successfully installed VIPRE on my other two PC running XP., on a trial period of 15 days.    My idea is to keep things works fine without hassle.