New partition formatting is not possible!

Similar Questions

• Tecra S3 M780 and Partition Magic is not possible?

  Hi all..

  I hope someone can help my here.
  Already tried looking but have not found an answer.

  OK, I have a hard drive (100 GB) and I would do the above partition to store my data on a different partition as my operating system.

  Problem is that Partition Magic does not work.
  I get an error that there is a partition on my hard drive that has no drive letter.
  I checked it and it's OK.

  Hard disk are:

  Allmost whole, primary drive C:
  No drive letter: 16 primary MB
  No drive letter: 8 MB

  I think the primary 16 MB is the problem.
  Can someone tell me the reason or purpose for this partition?
  It has something to do with the recovery?
  Is it possible to delete each partition on the hard drive, make new partitions (C, D and E), then the recovery cd to install Windows on the C?
  Or the recovery cd will automatically change the partition of the hard drive by default?

  I tried to do an Image of C: with Gost or Powerquest, but it no longer works.
  My intention was to create partitions and then put the image correctly.

  Cordially René

  Hello

  The first question is difficult to answer. I don't know what this score is for. I don't think anyone for something special.

  If you want to divide the HARD drive into separate partitions and can accept to retrieve the device, then the recovery CD can help you.
  Just start on it as usual, but choose rather the Advanced recovery if Standard.
  This will give you the ability to manually set the size to be assigned to the C partition (where the OS will be installed).
  Once completed the installation, simply go into diskmanager, add a new partition and format it.
  TADA! You are home.

  BR
  Tom

• Installing WXP - HARD drive format is not possible

  Hello

  For some time my laptop really worked slowly on the net. Before that, it was working very well so I thought I have delete all and install the new windows xp (nl).

  So I start and get her choose between

  NTFS (quick) format
  NTFS format
  Do not format

  I chose the Middle, but it always stops on 14%?
  I can format it quickly, but then my problem is not solved.

  What can I do, what do you guys think is the problem?

  Thank you people!

  Hi Steven

  It will be interesting to know what model of laptop you have and what operating system you want to install.

  In my opinion, you must use the restore for the installation CD. On this way the disk HARD integer will be formatted correctly and in 20 minutes, the laptop will be ready to use. You can use CDs of recovery for the creation of two partitions if you want.

• Do a clean install of Windows Vista 32 8.1; advice on the new partition formats.

  Hi, I'm going to do my clean install of Windows Vista 32 8.1 today.

  Need advice on the size for my new partition (s).

  Currently defined as the partitions:

  Total: free:

  OS (c                          99.7G          11.9G

  Data (D G 111, 14.5 G)

  HP_Recovery (E 12.0 G 1.97 G)

  I am running:

  Laptop HP Pavilion DV9700 Entertainment

  32 Vista Home Premium, SP1

  Basically I want a suitable partition for the new Windows OS 8.1 (more room for restore points).

  And the rest of the data area, I guess, as if I had originally.

  Does anyone have any other ideas, because I start from scratch.

  Hi davisj-oaktree.

  To remove the Vista partition, I included the following two links http://bit.ly/1dWZLLn, and http://cnet.co/1dWZQii. Please check the information on each of these websites.

  Good luck!

• Illustrator CS6 - export slices in SWF or SVG - format is not possible more?

  Hi all

  I'm just learning it is not longer possible to slices of export to swf or format svg via registration of the web dialog box:

  http://blogs.Adobe.com/ivandavid/illustrator_cs6_save_for_web/

  Besides the fact that I believe that this is something quite strange to delete an existing feature...

  Anyone know a work around for this (apart from the installation of cs5.5...)?

  I need to be able to sort my slices for export as swf.

  As far as I know, the only option to export slices is through registration of the web dialog box, but this dialog box offers only graphic formats pixel, so now to use Fireworks or what ever to convert them to vector SWF...

  What a bummer...

  Thank you!

  Semi-ignore my previous answer - found another work around that is to turn your slices to work plans.

  After you make all your slices, use the slice Selection tool to select your first instalment. Go to object > plans > convert into work plans. This should create a new work plan for this group. This, for all of your slices.

  

  After the creation of new work plans of your slices, go to file > export... and then select Flash (swf) in the menu dropdown. Make sure that you check the option "Use work plans" under the menu format.

  

  This process should lead to the individual SWFs for each section, as well as your original image. I hope this helps!

• Saving a document in a reduced format is not possible more

  Hello

  I use a Mac with El Capitan and Adobe Acrobat X Version 10.1.16.

  For years, I used the option "save in reduced format. This doesn't work anymore... Nothing happens.

  Thanks for your ideas.

  Hi delfinou,

  Acrobat X is not compatible with Mac OS El Capitan, please check system requirements system requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC.

  All features may or may not work. Be sure to use the application in a consistent environment.

  Kind regards
  Nicos

• Time Machine the new disk transfer has not moved all the time

  I have a Time Machine backup to an external drive. It works very well. However, he was beginning to run out of space, so I bought a new, bigger HD.

  I followed all the steps of Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support.

  I then waited 12 hours for that copy.

  Around midnight, I noticed the copy is complete. There was a message that iWork had not been copied because he needed a different operating system. But I rejected. There are no other messages.

  I changed the Time Machine preferences on the new disk. And fell asleep.

  This morning, I walked into a Time Machine.

  Only the first date from July 2014, was on the new disc of TM. Then there was five times after midnight when the new drive was saved.

  But there is nothing in any of the years between the first date and after midnight.

  I know that there are hundreds of TM captures on the original disc. And I've used them very well.

  I tried to copy individual files from the old drive to TM to the new, but it is not possible to "change the backups."

  10.10.5 system

  What should do?

  While in Time Machine, to see all the volumes mounted shift - command - c.    Information derived from Linc Davis.

  If this does not work, try to copy the file to disk/restore utility using to copy the backup to a new location. Please note that this will reformat the destination partition.

• Panasonic 50 1080 p files is not possible in PPro CS4

  The European model of new records Panasonic camera AVCHD 1080 p 50 (called SD700 in Europe) which is a big advantage.

  http://www.Panasonic.co.UK/HTML/en_GB/products/camcorders/HD+camcorders/hdc-SD700/overview /3422617/index.html

  The problem is, there is almost no NLE can handle this format. I would like to change this material in Premiere CS4 but I had no luck.

  Can I import those clips into a modified with framerate 50 p model. When I like to return the timeline for better preview or export it with the MediaEncoder I don't get an error message like "this format is not possible.

  I can create a 720p50 sequence and import this material of 50 p, then everything works fine. But a sequence with the native resolution and framerate - no chance. I even tried with Cineform NeoHD. I can convert it without any problems, but when I import this material in the first I have the same problems.

  Any other material like 1080i50 works without any problem on the front.

  I am not alone with this problem, a lot of people here in Germany have the same problem and nobody has found a solution so far. We talk in several forums, but without success.

  Here's an original clip directly from this camera (size 40 MB):

  http://www.file-upload.NET/Download-2472498/00005.MTS.html

  Helmut,

  Well, I don't know what is the problem; I am able to import, edit and export the images very well. Check out a file H.264 50 fps 640 x 360, I exported here. I put up a custom sequence, although it seems that the tent to use MPEG2 for the codec to preview isn't possible, so I did the following in place:

  

  Note that you will need fast disks to serve files for previewing uncompressed; You can try other available codecs, with the exception of the DV codecs that won't work for the size of the order.

  What you are trying to export to you get the error message? I can help you to implement a correct encoding preset for that...

• Bootcamp has not finished - how can I continue installing windows on the new partition?

  Hi thanks for reading me.

  I started the bootcamp, it created the partition and install windows started 8.1.

  He asked for the location of the reader, so I chose my USB hard disk (read here which was possible) - SSD space is such a premium.

  I was told that the format of the disc is not FAT GUD, so I gave up installing.

  I used the disk utility to reformat the external hard drive.

  How can I get the windows partition now rerun the installation process?

  I tried the OPTION start upward, but the new partition does not show yet.

  Any help would be really appreciated.

  ~ Paul

  the partition windows 8 must be greater than 30 GB

  After that, please review the documents of Apple Computer

  How to install Windows using Boot Camp - Apple Support

• Setup could not create a new partition system

  Ok.  I just built a new rig.  ASUS P55 intel chipset mobo.  I have two WD Caviar Black hard drives and a RAID-1 array.

  I installed my OEM WIN-7-64 operating system several times.  Mostly because my WUSB54GC Linksys adapter wireless crashes my OS WIN because of a compatibility problem.

  Long story short: the last time my OS crashed he would not be stopped, kept grinding and grinding so I stopped it "hard."  Then when I tried to restart it kept a black window stall without launching.  So I decided to start over with a clean install.

  Big mistake!

  When I got to the place where you want to install? I had onlyl only one possibility, I created a RAID-1 array with 1 TB WD caviar drives two of the screen.  Then, I started to FORMAT it the disc for the drive I want to install WIN 7-64 on.  That was the big mistake.  Previously, I was able to install WIN 7 several times, but after formatting the HARD drive, I received the message "Setup could not create a new partition system.  I can't find the logs and I tried all of the suggestions that I have found here and does not.

  I have an ASUS P55-Deluxe mobo with two 1 to WD Caviar black HDs in a matrix RAID-1.

  I tried to reinstall WIN 7, with the HDD BIOS on IDE.  It worked once in what concerns the installation of the OS, but whenever I try to recreate the RAID array, I get the bloody message "Setup could not create a new partition system!

  I tried using partition of drive on BACK in but nothing works.

  Of course, here, someone has the same problem and has a solution.

  Help, please!

  Hi Steve,.

  On another forum, I read to remove the battery from the motherboard and wait 10 minutes before turning.  Not only did it clears the CMOS memory, but "remains".  After that, I was able to partition my RAID-1 disk, format the partition, load my drivers and install WIN 7.

  Thanks for the quick response!

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• Is it possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition?

  Partitioning of a Windows 7 computer

  On a laptop Windows 7 HP, it is possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition? I know I can run Win7 XP mode, but many prefer a base XP environment. Yes, I have new copies unregistered XP and Office 2003.

  TIA,

  Steve

  Besides Partition Master you can also use Windows 7 "Disk Managment" to shrink the partition of Windows 7, create a new partition of the space "unallocated", and then do a formatting NTFS "Full".

  Installing dual Boot with Windows 7 and XP
  (Read each method in this article and that fits your needs)
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  EasyBCD allows to appear more user-friendly boot menu:
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• Setup could not create a new partition or system to locate a system partition.

  Today, I decided to re - install windows 7 to make it was once again, after saving all necessary files on my edge 1 TB hard drive restartrd windows with the retail CD in the CD drive. I pressed F12 and chose to start with the CD rom, now after several minutes while the CD was put into service, I informed all language settings, keyboard and time and press Next. Then clicked install now.
  ...
  ...
  About 10 minutes later, the next set of options showed, Normal install and custom install. I clicked customized. I then progressed to formate the hard drive and then click to select and then pressed...
  He been said now, "Setup could not create a new partition system or locate an existing partition in the system. So I tried to fix this by removing the primary hard drive and the other disappeared two (excluding the 1 to one). So I then clicked new on this 150G hard drive and then clicked on, it now says the main hard drive. I then clicked Next. ..
  The same thing, "wa unable to create a new partition system or locate an existing partition of the installation system. now I'm stressed and I really want to fix this today, so I came to the internet.

  Please can someone help me?
  -Sent from my iPhone.

  Disconnect the SATA cables to all your drives except the drive hard that you plan to install Windows on and the DVD player. Also unplug all devices except for the keyboard and mouse enternal.

  Then, enter the BIOS and configure the DVD drive as the first boot device.

  Now try the reinstall.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• We get an error "could not create a new partition or find existing. "For more information, see the Setup log file" error message "while trying to install Windows 8

  * Original title: 8 victory moved - Error Message: failed to create new partition...

  I have Win XP on my Dell Dimension 5150, which is the dual boot with Linux Mint 12 Lisa and this is my favorite of the bunch.

  I bought the DVD of 8 Pro Windows by an Australian retailer.

  Win XP is on a 39 GB partition with other application files. I had to delete several files to get the free space necessary to WIN 8 and finally finished by formatting the partition and passes for a COMPLETE new installation.

  Unfortunately, I now get the "failed to create new partition or find existing. For more information, see the Setup log file"error message. I can't find a Setup log file that I do a boot from the DVD.

  I tried to delete all external drives and other USB devices, including my Modem but my Wired USB keyboard/mouse.

  Two internal HARD drives are as follows:
  Disk 0 Partition 1-110 GB - system (LINUX)
  Disk 0 Partition 2 - 3.5 GB - logical

  Disk 1 Partition 1 - 47 MB - OEM (reserved) [DellUtility]
  Disc 1 2:Win - 39.1 GB - System Partition
  1 3 disk partition: DATA - 39,1 GB - logical
  Disk partition 1 4:OfficeProgs - 19.5 GB - logical
  Partition on drive 1 logical - 39.1 GB - 5:PROJECTS
  etc to score 8 with 9 MB of unallocated space.

  I have tried both 64 and 32 discs with the same result.

  As I have now is no longer no matter what Windows on my computer, what's the next step? If any ;-)

  Hello

  I solved the problem. It seems that you can not install on a secondary partition with in an earlier version of windows. You must restart the computer and run the installation from a dvd or other media.  Once you get the installation running you should be able to install on another partition without any problems.

  Nice day