new primary transmission

Similar Questions

• Prefetch files deleted and my primary transmission reduced 4 GB memory

  Original title: prefetch files

  just delete the prefetch files and my primary transmission reduced 4 GB memory. Why?

  1. There is no advantage to deleting files in C:\Windows\Prefetch.  This will result in a temporary increase in startup and loading time of your computer program, but the files will be rebuilt.

  2. it is difficult to say what might have caused a reduction in the available disk space.  My guess is that you have some third-party backup utility running.  To study, download and run TreeSize Free.  Be sure to run 'as administrator' in order to get an accurate view of what takes up space on your hard drive.  http://www.Jam-software.com/treesize_free/

• Migration of data from the old platform to the new primary database, need advice.

  I have physical standby facility and everything works now.
  
  Next weekend, we will do the actual migration of the old platform to the new environment.
  
  I have several issues of concern.
  
  Migration will go to the primary database. I'll have to remove patterns and inside expdp dmp.
  
  While I do all those, what data base waiting? should I disable it again apply?
  
  What other concerns and precautions I need to take before I have to remove all data from primary school and do a migration?
  
  Thank you in advance.

  Hello;

  My main concern would be the FRA (assuming you use it).

  By doing all that generates a ton of archives, you have to worry about the space on both sides.

  I would consider increasing my FRA on both sides.

  I would not disable the recovery, but I look very close and be willing to adjust my space as needed.

  As long as you don't miss space you should be fine. I had once a backup log files more than 250, and it took about 15 minutes to catch up.

  Have a little prepared scripts in advance if you can increase the space or delete archive applied and it should be fine.

  I also opened at least two terminals on the primary and Standby. Everyone look at space and the other to execute all what you need to adjust the space.

  The rest is common sense, first do the smaller drawing if you have an idea what to expect. Decaying etc. as much as possible.

  Best regards

  mseberg

  I have a shell script called 'quickcheck.sh' (use a separate but .env file it will send information vital back)

  With a little work, you can do this in something that makes it easy to keep an eye on things.

  #!/bin/bash
  ####################################################################
  #
  
  if [ "$1" ]
  then DBNAME=$1
  else
  echo "basename $0 : Syntax error : use . quickcheck  "
  exit 1
  fi
  
  #
  # Set the Environmental variable for the instance
  #
  . /u01/app/oracle/dba_tool/env/${DBNAME}.env
  #
  #
  
  $ORACLE_HOME/bin/sqlplus /nolog <
  

  and then a SQL file called quickaudit:

  SPOOL OFF
  CLEAR SCREEN
  SPOOL /tmp/quickaudit.lst
  
  --SELECT SYSDATE FROM DUAL;
  --SHOW USER
  
  PROMPT
  PROMPT -----------------------------------------------------------------------|
  PROMPT
  
  SET TERMOUT ON
  SET VERIFY OFF
  SET FEEDBACK ON
  
  PROMPT
  PROMPT Checking database name and archive mode
  PROMPT
  
  column NAME format A9
  column LOG_MODE format A12
  
  SELECT NAME,CREATED, LOG_MODE FROM V$DATABASE;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking free space in tablespaces
  PROMPT
  
  column tablespace_name format a30
  
  SELECT tablespace_name ,sum(bytes)/1024/1024 "MB Free" FROM dba_free_space WHERE
  tablespace_name <>'TEMP' GROUP BY tablespace_name;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking freespace by tablespace
  PROMPT
  
  column dummy noprint
  column  pct_used format 999.9       heading "%|Used"
  column  name    format a16      heading "Tablespace Name"
  column  bytes   format 9,999,999,999,999    heading "Total Bytes"
  column  used    format 99,999,999,999   heading "Used"
  column  free    format 999,999,999,999  heading "Free"
  break   on report
  compute sum of bytes on report
  compute sum of free on report
  compute sum of used on report
  
  set linesize 132
  set termout off
  select a.tablespace_name                                              name,
         b.tablespace_name                                              dummy,
         sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id )      bytes,
         sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id ) -
         sum(a.bytes)/count( distinct b.file_id )              used,
         sum(a.bytes)/count( distinct b.file_id )                       free,
         100 * ( (sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id )) -
                 (sum(a.bytes)/count( distinct b.file_id ) )) /
         (sum(b.bytes)/count( distinct a.file_id||'.'||a.block_id )) pct_used
  from sys.dba_free_space a, sys.dba_data_files b
  where a.tablespace_name = b.tablespace_name
  group by a.tablespace_name, b.tablespace_name;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking Size and usage in GB of Flash Recovery Area
  PROMPT
  
  SELECT
    ROUND((A.SPACE_LIMIT / 1024 / 1024 / 1024), 2) AS FLASH_IN_GB,
    ROUND((A.SPACE_USED / 1024 / 1024 / 1024), 2) AS FLASH_USED_IN_GB,
    ROUND((A.SPACE_RECLAIMABLE / 1024 / 1024 / 1024), 2) AS FLASH_RECLAIMABLE_GB,
    SUM(B.PERCENT_SPACE_USED)  AS PERCENT_OF_SPACE_USED
  FROM
    V$RECOVERY_FILE_DEST A,
    V$FLASH_RECOVERY_AREA_USAGE B
  GROUP BY
    SPACE_LIMIT,
    SPACE_USED ,
    SPACE_RECLAIMABLE ;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking free space In Flash Recovery Area
  PROMPT
  
  column FILE_TYPE format a20
  
  select * from v$flash_recovery_area_usage;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking last sequence in v$archived_log
  PROMPT
  
  clear screen
  set linesize 100
  
  column STANDBY format a20
  column applied format a10
  
  --select max(sequence#), applied from v$archived_log where applied = 'YES' group by applied;
  
  SELECT  name as STANDBY, SEQUENCE#, applied, completion_time from v$archived_log WHERE  DEST_ID = 2 AND NEXT_TIME > SYSDATE -1;
  
  prompt
  prompt----------------Last log on Primary--------------------------------------|
  prompt
  
  select max(sequence#) from v$archived_log where NEXT_TIME > sysdate -1;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  PROMPT
  PROMPT Checking switchover status
  PROMPT
  
  select switchover_status from v$database;
  
  PROMPT
  PROMPT ------------------------------------------------------------------------|
  PROMPT
  
  SPOOL OFF
  
  exit
  

  The env file looks like this: (if the file would be PRIMARY.env)

  ORACLE_BASE=/u01/app/oracle
  
  ULIMIT=unlimited
  
  ORACLE_SID=PRIMARY
  
  ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
  
  ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
  
  LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
  
  LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
  
  LIBPATH=$LD_LIBRARY_PATH:/usr/lib
  
  TNS_ADMIN=$ORACLE_HOME/network/admin
  
  PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
  
  export EXP_DIR=/u01/oradata/PRIMARY_export
  
  export TERM=vt100
  
  export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
  
  export ORACLE_HOME
  
  export LIBPATH LD_LIBRARY_PATH ORA_NLS33
  
  export TNS_ADMIN
  
  export PATH
  

  Published by: mseberg on December 9, 2011 18:19

• Copy a record ang get its new primary key value

  Hello again everyone!
  
  I need to copy a record from a table at the same table. Here is the sample table and data:
  
  CREATE TABLE (PRODUCTS)
  ID INTEGER NOT NULL,
  DESCRIPTION VARCHAR2 (80).
  PRICE NUMERIC (9,2),.
  KEY ("ID") PRIMARY CONSTRAINT 'PK_PRODUCTS '.
  );
  
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 1', 8.5); -You will receive 1 trigger ID
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 2', 7.0); -You will receive 2 ID by trigger
  
  Now, I need to copy data from product 1 on a new line on the table.
  
  I would use the following SQL statement:
  
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE)
  SELECT DESCRIPTION, the PRICE OF PRODUCTS WHERE ID = 1 - assuming that I want to copy 'Product 1'
  RETURN ID IN: NEW_ID
  
  But as far as I know, this is not supported by Oracle. Is there no workaround solution to solve the problem?
  
  I can't use procedures, functions, or something like that. Must be a SQL statement.
  
  Once again, thank you all for help.
  
  Best regards

  user9936895 wrote:
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 1', 8.5); -You will receive 1 trigger ID
  INSERT INTO PRODUCTS (DESCRIPTION, PRICE) VALUES (' PRODUCT 2', 7.0); -You will receive 2 ID by trigger

  I really, really, really hope that your trigger uses a sequence to generate pk

  I can't use procedures, functions, or something like that. Must be a SQL statement.

  If your trigger uses a sequence to generate the pk, I hope that there is a clause which no values if the KP value is zero...

  If Yes, then you could just do:

  INSERT INTO PRODUCTS (ID, DESCRIPTION, PRICE)
  SELECT id_sequence.nextval, DESCRIPTION, PRICE FROM PRODUCTS WHERE ID=1 --Assuming I want to copy "Product 1"
  

• RadioButton with submit does not insert new primary key/registration

  Hello
  
  I have a form with radio buttons. Originally, I used the button create automatically generated to send the page, record the value and creates a branch to another page. If the primary key is zero, it would create a new record with a primary key in the sequence.
  
  I changed the radio button to be 'submit' and now he passes on the next page, but does not create the new key.
  
  I don't see what is the difference between the two methods, but it is probably simple...
  
  Any help is greatly appreciated.
  
  Thank you
  Matt

  I don't see what you're doing. The page that loads the record must be programmed to do a checkout of the line using the element as the PK value if the element is not null. Attribute of the Source of this element should probably also be «Just...» ».

  Scott

• new primary user

  Background: I bought my wife an iMac about 2 years ago (end of 2013 build). It includes all current software upgrades. She used for a few months when running Windows on it. His CAD program behaves in this double OS environment, so I ended up find a Wintel solution. I took his iMac because it was newer than mine.

  Problem: When I'm invited to the app updates, he sometimes asked his ID/PW and sometimes mine. Is there a way I can get it to just warn me about updates? I don't want to delete his user account, because she always things stored on the Mac.

  If you're not already, please change your account to be an administrative user. Here are some instructions:

  Convert a standard user to administrator

  1. Choose the Apple menu > System Preferences, and then click users and groups.
  2. Click the lock icon to unlock it, and then enter an administrator name and password.
  3. Select a managed user or a standard user in the users list, and then select "allow user to administer this computer."

• Help to new primary hard drive sounds: HP Pavilion 6620f PC

  I'm a non-technical guy who just replaced the main OEM 1 TB drive with a VelociRaptor 300 GB 10000 RPM hard drive. The installation went well, thanks to the fantastic instructions of the manual of HP and it works fine. Hard Disk Sentinel (free version) tells me that his condition is "perfect."

  Here's my question:

  • the new drive is intermittent but constant and subtle sounds and I don't remember hear them before.
  • Is there a problem or is it only a function of another type of hard drive?

  For any help or suggestion accepted with gratitude! I hope that I worry about anything, but do not have the technical expertise or experience to know!

  Thank you

  Linda

  Hi Linda,.

  Hard disks have different acoustic characteristics according to the manufacturers (and in overall models from the same manufacturer).  In addition, you went with a 1 TB of HARD drive that probably have a rotational speed of 5400 RPM on a faster drive.  If you are hearing just weak 'rattling', I think it's perfectly normal and given the utility disk HARD sees no problem with the drive, I would say that everything is fine.

  Best regards

  DP - K

• increasing primary transmission

  Hi I have windows 7 installed on my drive c (drive) and I'm running out of space, I have 67 GB on drive D (logical drive) and I have 67 gb of space free, sitting beside her, I stem D drive and ended up with it, but I cannot increase or exstende drive C because the location is grayed out, and what I've read so far confuses me no end. can someone please help but keep it step by step simple, this is my first post and first go to this grace.

  You can easily move your files from the user to another drive. For any folder in C:\Users\, right-click on it, select properties then the location tab and change the drive letter. Windows offers to move all the files to the new location.

  To increase the space on C you will need a third party partition manager. With Windows tools you can only extend a partition in the space immediately following it. The free edition of the House of http://www.partition-tool.com/download.htm will do the job.

• Constant stop - 0xF4 on new generation - Windows 7 errors

  Hi all

  I get the BSOD 0xF4 at least once or twice a day. I can boot Windows without problem. It appeared to a next day to up my new build and running.

  I tried to put back all the cards, memory and cables without result. All the drivers appear to be up-to-date. The system has crashed twice now by watching videos on youtube if that helps?

  The last verification error was: 0x000000f4 (0xfffffa800a677b30, 0xfffffa800a677e10, 0 x 0000000000000003, 0xfffff800023818b0)

  Link (via skydrive) minidump files:

  https://SkyDrive.live.com/redir.aspx?CID=8be30cc366a306d7&RESID=8BE30CC366A306D7! 393

  System details:
  CPU: Intel Core i7 2600 k
  Motherboard: ASRock Extreme 3 Gen 3
  RAM: Kingston HyperX 1600 Mhz DDR3 2 x 4 GB (KHX1600C9D3X2K2/8GX)
  GFX CARD: 1280 MB MSI GTX 570 Twin Frozr III
  Primary transmission: 120GB OCZ Vertex 3
  Secondary drive: Western Digital Caviar Black 1 TB (WD1002FAEX)
  OS: Windows 7 Home Premium

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check were all F4 wininit.exe or CAUSE csss.exe which are components of Windows
  which means something else hunt in error.

  BugCheck F4, {3, fffffa800abf8b30, fffffa800abf8e10, fffff800023dc8b0}
  Probably caused by: wininit.exe
  FAILURE_BUCKET_ID: X64_0xF4_C0000005_IMAGE_wininit.exe
  BUCKET_ID: X64_0xF4_C0000005_IMAGE_wininit.exe

  BugCheck F4, {3, fffffa800ac60b30, fffffa800ac60e10, fffff800023868b0}
  Probably caused by: csrss.exe
  FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe
  BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe

  ------------------------------------------------------------------------------------------------------------

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) actually remove and
  replace - do not just tight. On a laptop computer on all you can do is reinstall the memory and possibly check
  the contacts/connection to the hard drive. Memory could be the problem, so if you have more than 1
  stick swap them in and out to see if the problem follows a stick or try the new memory. Antivirus/anti-
  spyware/security programs have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.
  Also check the wiring on the hard drive.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Freezes" the experience on my new desktop HP Pavilion Elite HPE - 578d

  Hello

  I had this problem haunting for the past two weeks. It's something minor, but extremely irritating.

  About 2-5 minutes after starting the computer, I noticed the HDD activity LED goes berserk for about 90 seconds, during this period, pretty much "freezes". I mean the mouse cursor could still pass a whole, but that's all. Nothing can be done. Most of the time I would be in my (Firefox) browser screen.

  Checks using Norton Internet security, with my PC came shows that no other program of 'suspects' is running other than firefox.

  My system is pretty much straight out of the box, except for the SSD that I replaced the primary transmission (had to install Acronis True image 2011 for this). I thought that the acronis could cause a few problems with the system so I went to the start to prevent to load initially. No joy.

  Is there another program I can install to diagnose this problem. It of not a big deal, only "freezes" for 90 seconds about a few minutes after I start the PC, but extremely irritating as it is a new system for me.

  Thanks for the advice given.

  Apparently, it's a problem documented with Intel 6 series motherboards and SSD Crucial drives.

  Complicated stuff.

  I applied the solution found here, to make a reg file to fix this problem, because I do not run win 7 with the mobo Intel H67 (Cleveland). It seems to have worked for now. Although I'm not sure how to "undo" it later when there is a problem of crucial / intel.

  [URL ="http://forum.crucial.com/t5/Solid-State-Drives-SSD/Solution-C300-Disk-Freeze-ups-in-Windows-7-solved-for-me/td-p/38766" "] http://forum.crucial.com/T5/Solid-State-Drives-SSD/solution-C300-Disk-Freeze-UPS-in-Windows-7-solved-for-me/TD-p/38766 [/ URL]

• recovery system after creating a new partition

  Product number: A6Y43UAR #ABA

  Name: HP Pavilion g6-1d38dx Notebook PC

  OS: Windows 7 64-bit

  My hard drive is shipped with a factory setting of 4 primary partitions. I would like to remove one of the partitions in order to create a new primary partition using this guide (jump to option I content):

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-...

  My goal is to create a new partition D where I store all my data so that something happened to my operating system that is on the C drive (viruses, etc.), all my data will be safe in the drive D. I hope that running the system recovery HP (using the f11 key) will not remove the user created the D partition and the data in it , but that's where my confusion. The guide above says the following on this subject:

  "Remember that if you decide to use the recovery discs or the F11 option to restore the PC to its original state, all partitions that have been created by you will be lost and will also lose all data that was stored on them."

  
  However, another document which is the HP system recovery guide, says the following

  Your computer can have three types of available system recovery, or he might have only two. Use the type of recovery in order to solve your problem without making further changes as necessary.

  If you don't have 3 options in the recovery then Yes, System Recovery Manager will delete all partitions and restore the original configuration.

  To better protect your files an external USB hdd is a good investment of backup. You can also use it to make a System Image of your hard drive that can be used to restore windows and all software/drivers if you need to reinstall. 1 > guide 2 > guide

• Sam P850 - what it takes with a primary partition 3, if I resize number 2

  The laptop model is P850-131.

  I need to decrease the size of the partition win 7 to create a space to expand and its logical partitions.
  But what to do with partition primary number 3 after resizing is finished.
  What is it. It contains data. Is - this for backup recovery Toshiba or what.
  Contain data, if no backup has not been done.

  Should I organize a new primary number 3 because it is primary end either, it's...
  It seems not to be of type NTFS. If I create another, what it should be.
  All information is valuable.

  Can you please open disk management and make the screenshot. It will be very useful to you understand what you mean exactly.

  What I can say is follow: before do you anything create recovery disk. It may happen that after changing the structure of the partitions you will not be able to install the OS using F8 and repair my computer option.

• Change/Remove primary parent

  Hello

  I need to change the primary parent on behalf of Microsoft family safety from one parent to another parent.

  How can this be accomplished?

  Thank you

  Arlo

  Hello

  To change the primary parent account that is associated with your child's account, you need to remove the primary parent. This will remove all restriction settings you requested to your child. After removing the primary parent, you will need to restore on behalf of the child under the new primary parent and the installer restriction again. To do this, please follow the steps below:

  1. go to https://familysafety.microsoft.com and sign up using the primary parent account.

  2. after accessing it, you will see the main page and a list of family members who are associated with the account main parent. Click manage the list of the members of the family , this option is next to make a family member, a parent.

  3. on this page, you can remove the Member who is under your account. You can also remove the primary parent by clicking on the checkbox next to the name of the main account.

  4. Once you have chosen, all members that are related to your account will be also included.

  5. click on the Remove button and confirm the operation.

  Once this has been done, you will have to restore on behalf of the child under the new primary parent account. To do this, please follow the steps below:

  Add/Re-adding a child (with a Microsoft account) for parental control in Windows 8

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Let us know the result later.

  Thank you.

• disk failure primary DART

  I have a hp dv7 3105tx double hard drive hard drive has no need to replace someone can tell me what drive is in fact the main drive

  Hello

  The primary transmission is under the same coverage that the ram modules - see Page 45 of your & Maintenance Guide.

  Kind regards

  DP - K

• Different between primary and logical partition?

  Referring to the next video, after a free space for the new partition, I create partition, which show the logical drive (blue color), but the other partitions are of primary partitions (blue color), I would like to know it possible to create a main drive instead of logical drive partition, and what difference is between the primary and logical partitions.

  There is an option to delete a logical partition (drive D :), after you remove it, can he create a new primary partition?) Through this process, it will cause no problem on the primary partition (drive c :))?

  Is there an advantage to have a logical partition (drive D :)?

  In the future, if I need more space in C: drive, it will be easier to extend the primary partition (drive c :)) with logical partition (drive D :)?

  If a logical partition (drive D :) convert primary partition, it will be easier to extend the primary partition (drive c :)) with primary partition (drive D :)?)

  http://www.YouTube.com/watch?v=jKW6ROWZ5yU

  Does anyone have any suggestions?

  Thanks a lot for your suggestions

  Hello

  Thanks for posting your query in Microsoft Community!

  According to the description, it seems you want to know the differences between the primary and logical partitions.

  I'll be happy to help you with this.

  I suggest you to refer to the following articles and check if it helps.

  Understanding Disk Partitions

  http://TechNet.Microsoft.com/en-us/library/dd799232 (v = ws.10) .aspx

  What are partitions and logical drives? (Applies to Windows 7)

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-partitions-and-logical-drives

  If you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.