New problems of MAX

Similar Questions

• Drupal 7 and blogger do not work correctly on Firefox but on IE; the problems are quite specific; new problem.

  New problems on Drupal 7 and blogger who agree on IE. In Blogger, if I try to reply to a comment, I get a new window into the comments box that contains a new iteration of my Blogger template that I can't use. In Drupal 7, there are at least two modules that do not work correctly: the CKEditor GUI does not work and the filter of the Module does not work correctly. There is no error message, and the two modules work fine on IE and Chrome.
  There is nothing on the web that suggests or either of these Web sites is to have this kind of problems.
  Thanks for any help.
  David Hilfiker

  Hi david.hilfiker,
  Thank you for your question, I understand that this is happening on two sites. If this is not the case on other people's computers please try a restart of Firefox.
  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

  2. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• New problem, Lycos Mail is my home page. When I open a new window I usually get the Google search, which is what I want. Now, somehow when I open a new window I Yahoo search. How can I change to Google? Thank you, Randy

  New problem, Lycos Mail is my home page. When I open a new window I usually get the Google search, which is what I want. Now, somehow when I open a new window I Yahoo search. How can I change to Google?
  Thank you
  Randy

  A new window opens by default with the homepage.

  See:

  • https://support.Mozilla.com/kb/how+to+set+the+home+page

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Reinstall windows 7 new problem hard drive

  Hello

  I had a hard drive fail on my hp mini 110-1110sa. I bought reinstall Windows 7 hp discs and installed a new hard drive (tested fine in diagnostics).

  I plugged an external dvd drive via usb. The installation program starts (with the help of reinstall dvd) then arrives at a point where it displays the following:

  Version V1.13.9.1

  Date: 2009-04-01

  Rita - restore startnet

  For Win 7

  [info] SRC_DRIVER = none

  [info] SDV_DRIVER = none

  [error] The startup disk is not found.

  Press a key to continue.

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>

  Any ideas? Normally reinstalls them works fine for me but it is a new problem.

  Best regards

  ineedhelp

  Hello

  HP UK kindly agreed to collect and fix my HP mini computer for free, even if it is out of warranty.

  Also said something to not admit fault (not the words but you get the idea).

  Now have HP mini back - top of page in the end customer service.

  Best regards

  K.

• Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Automatic updates of Windows vista 64 bit do not install. It is also a relatively new problem.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• New release of Edge for IE11 difficulty causing new problem

  I'm having a problem with mousenter and mouseleave. I think it has something to do with the opacity, but I'm not sure. Because of the IE 11 problem, I downloaded the latest version of adobe edge and re-released. When I downloaded the new files it solved the problem, and now I saw the edge files in IE 11. Now, I have a new problem. For some reason when I updated my files they stopped working properly.

  This is how the files look now.

  

  Here's how the file looked before the new update.

  

  Now I looked in all sorts of reasons, it may not operate correctly and have found no solution. Has anyone else had problems. This effects all THE BROWSERS not only IE11.

  In fact, I solved the problem. For some reason when I did the update to resolve the problem of IE11 all grouped items use opacity on mouseleave stationary or mousenter were treated as a single element and would be broken. So I had to separate the elements and create each individual transition effect and it solved the problem. Not sure why this happened or if it was a bug, but it was the work around me.

  Thanks for reaching out and getting back to me.

• New problem has developed. I go to a site (my bank account) and try to open the print icon. It flashes for a moment and goes. Also happens other places

  Occurs on several sites. My banking site - when I go to my account and then try to click on print a Bank Reconciliation window flashes and then goes. My health care provider site - went there today and I tried to click on the "explanation of benefits" related to the visit of a doctor. The link appears and disappears immediately.
  Problem just started a week ago.

  A new window starts to open and close? I get the same thing with the third link on this page:

  https://jeffersonscher.com/RES/PopIt.html

  I wonder if you have security-related add-ons that can detect and close the pop-up windows... Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any difference?

• Printing, new problem, tiny size, not cured by measures identified in support.

  A new old problem of a few weeks. When I print from Firefox, the result is a very small image printed in the upper part of the page. If I change the settings, it has chopped every page in 4 pages and prints a quarter on every page. I don't have this problem if I print from IE, so not a printer problem. I lived every step in the help topic relating to printing problems and an important step in response to a question from the forum. No joy.

  If Firefox does not use the entire sheet of paper, it can result from after having extracted Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter of the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In some other discussions involving printers Brother, the preference printer_printer_name.print_paper_data was established in 256 and when the user changed it to 1 that solved the problem of paper size. If you see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?

• Links of search results Google does not load (not a direct new problem)

  Simple problem:
  1 enter a term for Google to search for (either using the Google toolbar installed or via his landing page).
  2. the results are returned correctly.
  3. However, the returned links open in the same tab of search result, or in a new tab or a new window.
  4. Select the link in the search results tab does nothing. Firefox seems to be a momentary load try before remaining in the same place.
  5. launch the link in a new tab/window returns a Google long-chain based on the prefix (i.e. www.google...) address in the navigation of an empty tab/window.
  6 addresses returned by the search can be copied and pasted into new tabs/windows to load without a problem. Research process of Google to normal using this query works since IE every time.

  Test: "Energizer Bunny".
  Returns the link: www.Energizer.com/Energizer-Bunny/pages/Bunny-Center.aspx
  Has address: http://www.Google.ca/URL?SA=t & rct = j & q = % 20bunny energizer & source = web & cd = 1 & ved = 0CDYQFjAA & url = http %3% 2F % www.energizer.com%2Fenergizer-bunny%2Fpages%2Fbunny-center.aspx 2F & ei = ruYyT47cIYHjiALj69XGCg & usg = AFQjCNHg-eabuCQBx6Bv36V9F4pN4tQRYA & cad = AJLN

  Note that this is not the Google redirect problem that many users have encountered, but something different.

  Suggestion of John99 above that the cause of the problem is a problem of update of Google I think is correct. The discussion link: https://support.mozilla.org/forums/contributors/708153 indicated that Mozilla is working with Google and that a cancellation would be promulgated.

  Although I can say this was done because the Google search function works again (from 4 PM MDT). I tried with some queries from first time and they worked as announced. All features have been restored.

  (For the record, cookies were already on my machine but I clear them and hide according to the first answer - that didn't work. No other solves above I only implemented. "So as far as I'm concerned, he was a"problem of Google", it was a"fix Google").

  Hope that affected everyone else now has the same experience. Thanks to those who offered their intelligence.

• Satellite click Mini L9W - B: loading new problem?

  Hi all

  I have some serious looking problems with my mini load click again (6 weeks) satellite.
  It seems to be a new addition to an already long list, but I had a glance at previous posts and has not found the same problem.

  The battery ran out a week ago and I've only connected last night to load all night (I was on vacation). This morning I tried to start and he won start t at all. The only thing it shows every 10 to 20 seconds (without touching the device) is the loading screen. I believe in the screen both batteries are empty, but the Tablet battery charge (now for 5 hours without a change in status). He still won t start when you press the power button.

  Someone had a similar problem? If my battery is just very deeply and patience will solve the problem? Other recommendations?

  The BIOS is upgraded to 1.7 since I had other questions charge described at the beginning and it seems to have fixed those at least.

  To be honest, I'm a bit fed up with it. I love really all the benefits of the device (size, detachment of the Tablet, connection USB etc.), but the list of problems is really a bit long

  I hope someone can help me. Thanks in advance.

  SAS

  I hope you solved this. I had the same thing. The problem seems to be that the unit is on and there is no enough power via mini usb to run and charge the batteries at the same time.

  The solution was to press the power button for 15 seconds to ensure a forced switch off then let it charge and check after a few hours of a short touch on the power button, is not enough to start. I hope you can see some charge in the battery of the screen.

• New problem z50 - 75 wireless? Startup problem

  Hello

  I had an another hp laptop which had a problems but the know-how could not fix it so they give money and I brought another Hp 4 days but then she had to be exchanged because of defective. Currys and PCWORLD even gave, but the problem kept pass. So I just paid the HP one and brought 3 days LENOVO Z50-75 it y a. the first Hp laptop, I had, had dns clients warnings in Event Viewer when you use wireless. Same thing on the new computer hp laptop. This problem still occurs in the LENOVO one too. These events started in Windows 10 for all laptops hp and lenovo. My computer laptop lenovo came with windows 10 in any case. So either it's a bug that should be fixed by a new update for the network adapter needs to be released. Computer laptop lenovo has Qualcomm Atheros the old hp laptop realtek the new computer hp laptop that was defective was and intel double wireless broadband and the same edition, DNS CLIENT EVENTS 1014 WARNINGS are still happening. This is definetley not my ISP fault because I replaced the router, more they found nothing on a week 2 diagnostics test on my internet. SO I just want to say lenovo that if there is a way you can fix this. Another thing is that after installation WIN10 threshold 2 on Lenovo Z50-75 when starting of the laptop it shows the logo screen once then black lenovo and then black screen again, then it boots. I have also all the latest updates. So if there is a way guys can fix that also. I'll post this in the microsoft forums too if they can help. Thank you

  Hi I managed to solve this problem by disabling the DNS CLIENT service, but always the startup problem also happens when I stop or restart the cirlce logo going arouns the shows as usual then flashes then closed restartsor and the same thing happens in the Welcome screen it flashes (black screen for a second), and goes after UPDATE of TH2

• Problems with MAX tasks on different stand-alone

  Hallo!

  I have problems with my MAX-tasks and my V12 Dasylab on different stand-alone.

  I have 3 devices on the first PC.

  OR USB-6009 dev1

  NEITHER USB-6210 dev2

  NEITHER USB-6501 dev3

  Now, I had programmed a file Dasylab which uses the device 2 and device 3. Everythink worked fine. I exported my MAX configuration for unit 2 and unit 3 and imported on the second PC. But that Dasylab was not able to find the right tasks for my program on the second PC, even if MAX everythink that went well. The only solution was to delete all tasks and create them again. But then I tried to open the program stored on my first PC again and I had the same problem, Dasylab was not able to find the right tasks, only solution was to remove the stains and create them again. I tried to reset the configuration of my Dasylab with the "Synchronize with MAX-configuration" option, but it wasn't succsessful. DASYLab gave an errormessage, not mentioning not what exactly is the problem.

  Can anyone help?

  Thank you very much and have a nice day.

  Hilby

  Hallo Hilby,

  I think it can be more that can be solved on the Forum of NOR. I think you should contact your local dealer and ask for help directly.

• problem with MAX after installing LABVIEW 10

  Hello everyone, I have a serious problem I installed labview 10 yesterday on 2 laptops, one of them works perfectly, however, the other gave me a two erros

  1.http://digital.ni.com/public.nsf/allkb/6CA56E2DDBCCA06086257591006141EE

  2. http://digital.ni.com/public.nsf/allkb/F24AA9FB6A3A0E9D86257539006141BE

  I tried the solutions above in the link, but it was all futile. can someone please suggest me what would be the problem? I had already LV8.0 on the laptop which is the cause of the problem. I tried to re - install the disk driver given

  for me by NEITHER, but no luck.

  When I started the laptop for the 1st time, there was a mistake in saying DOS command prompt: DATABASE ERROR and I cancelled the error!

  In addition, Labview works fine, its only MAX who has problems. is there a way I can only MAX to uninstall and reinstall? Please help me...

  Thank you

  Sorry CrackJack

  Try this one http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument    

• Autoset problem limits max gauge scale Custom

  I build a VI in which gauge ramp behave as a gauge needle i.e I plan to ramp change dynamically with changin values. I did a VI exactly like that and is the only problem that I face is I need the scale of the gauge from 0 to 6000, but when I run the Vi max sets to 1599 is automatically resized... I don't get what exactly I am missing work is why this problem is coming...... need help I enclose my VI here for your reference.

  johnsold thank you for your response...

  Well, I managed to find my mistake... ... the bug in who is using 'Scale.Marker [] values' we create markers in the balance and the number of markers that can be created is limited to 1600, because I think that so... thats why it always shows the marker 1599 e all markers above 1599 goes beyond the beach that is why we are able to see the markers above 1599 nt... I did work in other ways... thnks anyway for your answer...

• New problem with Amazon. No video control using WMP version 11.

  Thanks for your help, Meghmala.  I did what you suggested, but when I came tohttp://go.microsoft.com/FWLink?LinkID=34506 the 'UPGRADE' button was grey once again and would not work.  However, after changing the choice of two hidden files, I tried the new UNbox and - sail! -It downloaded and played videos from Amazon.  The only remaining problem is the following: videos of the Amazon are such that they can also be played in Windows Media Player.  I have WMP version 11 from the XP platform.  Videos actually work in WMP version 11, but the video controls (brightness, contrast, color, Tint) don't work - BUT ONLY WITH THE AMAZON of VIDEOS.  Otherwise, the video controls work fine with all my other videos.  By 'do not work', I mean that when I try to drag the pointers to a new value, they suddenly go back to the center position by s.  Any help here?  Thank you!

  Samhrutha - It seems that the problem was with Amazon.  I downloaded the videos WMP 11 wouldn't play correctly, i.e. with the video controls not working not properly, the simplest and most obvious way.  An Amazon representative suggested that I download them a more roundabout way (a lot more), so I did.  Now, WMP 11, they play very well.  Thanks for your help.