New remote for Gen 3 apple TV will not pair

Similar Questions

• Apple Watch will not pair manually or automatically

  Watch became disconnected from the phone.  Followed all the instructions to disable the twinning / re-pair.  Automatic pairing fails repeatedly.  Manual matching fails as well - the watch never displays a 6-digit code.  Has anyone seen this before / resolved for it?  Thank you.

  Hello

  For later use, it is not necessary to clear the pairing and re-pair Apple Watch when it is disconnected. If your watch becomes disconnected via Bluetooth and unable to connect to a Wi - Fi network, known at the time, it will display the icon disconnected on the dial of the Watch:

  

  Bluetooth disconnects occur every time that the pair iPhone is not available (as in the iOS updates or when your iPhone is out of scope). The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

  If they do not automatically reconnect instead of disconnecting your watch, rather trying to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

  • Check that Bluetooth and Wi - Fi are activated on your iPhone:
    • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
  • Check that airplane Mode is not enabled on your watch:
    • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
      • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
    • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
    • Otherwise, it can help to activate / turn off the airplane Mode again.
  • Restart both devices, both turn off together, and then restart your iPhone first.

  For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

• Apple Watch will not pair to iPhone

  When I try to implement my Apple Watch, my iPhone 6 tells me it's expired. I have the latest version on my phone that is iOS 9.3.5. I choose English and that my area is in the United States, but I can't go any further in the watch. I have reset the watch as the phone. Bluetooth is on. Both devices are charged. I even tried manually matching devices, but all I get is the same error message.

  Is this a new watch or you configure it again?  If used before you remove the existing settings Bluetooth pairing?

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• I use trusteer for Bank report but it will not support the beta version firefox o 9, suggestions?

  I use trusteer for banking report, but it will not support the beta version of firefox 9, suggestions

  Trusteer informed me that a new version of their report software that is compatible with Firefox 9 is available at http://download.trusteer.com/Gcur4Wtnu/RapportSetup.exe

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• iPhone 6 will not pair to lg Mandine for bluetooth

  My iphone 6 will not pair to lg Mandine for bluetooth. Called LG, but they said to call apple. Any suggestions why Iphone does not see the soundbar

  Hi, jparsons2.

  Please visit Apple support communities.

  I understand that you are experiencing a problem with Bluetooth pairing and your Soundbar.  If you have not contacted us via phone already, try to go through the troubleshooting steps in the following article.

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  See you soon

• Apple TV will not maintain a connection with my Samsung

  Apple TV will not maintain a connection with my Samsung TV UHD.  All other devices work well with it.  I tried switching ports HDMI and cables without change.  Apple TV can turn on and turn off, plug in for 10 seconds, or not at all.  (Note: Apple TV is still in install mode, because it does not appear long enough to complete the process.)

  HELP, PLEASE.

  Which TV model you have?

• I have CS3 on my current computer and he's dying. I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  I tried to download it on my new computer with the disc and it will not be activated. He says it's in my downloaded material, but it is not open! Help!

  Anna,

  It can be a challenge to install CS3 on a newer computer because it was designed for use on Microsoft Windows XP and Vista 32-bit operating systems.  You can check this link to check systems, it is designed to work:

  System requirements | CS3 product points.

  Guinot

• Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

  Why is-Messages for my non apple contacts does not on my Mac, they work very well on my iPhone.

  Transfer continuity troubleshooting procedure

  Continuity of transfer troubleshooting (2)

  iPhone, iPad, iPod touch and Mac using continuity - connect

  SMS relay - set and use - Yosemite / iOS 8

  SMS relay - set and use - Yosemite / iOS 8 (2)

  Sending text messages

• Apple iTunes will not run.

  Apple iTunes will not run.  I reinstalled several times. The error message has something to do with DEP.  But I doubt that iTunes referred to system memory.  In addition, my PC has hardware DEP, no software.

  Thank you.  Found the answer in the Apple community.  I had to reinstall Quicktime in order to get iTunes to run.  They had lost their association.  Everything works now.

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Why can't load the free version of the monopoly game? I played monopoly for days and now it will not load.

  I've been playing pogo monopoly free version for days and now it will not load. What can I do?

  Hello

  1. don't you make changes on the computer before the show?
  2 is the issue confined to monopoly?
  3. you receive an error message?
  4. How do you try to play the game?

  Method 1:
  Perform a clean boot and check if a third-party software is causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 2:
  You can perform a system restore and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Method 3:
  If you try to play the game via Internet explorer, then you can try to reset Internet Explorer and check.

  Reset the Internet Explorer settings and check.
  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  http://support.Microsoft.com/kb/923737

• I bought 2 Adera for Windows 8, and it will not download. Whenever I click on the download icon, nothing happens.

  I bought 2 Adera for Windows 8, and it will not download. Whenever I click on the download icon, nothing happens. It becomes extremely frustrating that the account has been debited from my bank immediately... Still no game! Any suggestions please. Thank you

  Hello

  You must get in touch with the sales of Microsoft and Windows Store Support for help on this issue.

  To avoid such problems in the future, you can try to reset the Windows Store cache, and then try to buy apps.

  Reset the Windows Store Cache steps.

  a. press Windows + R on your keyboard to open the Run dialog box.

  b. type WSReset.exe, and then click/click on OK.

  c. the information store now open and indicate the following: for the store cache has been cleared.

  Please let us know in case you need assistance on issues related to Windows.

• Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Original title: rtr - patcher.bat

  Brian

  You need to contact the developer of the game, because they are the only one who can help you.  We support Microsoft software & hardware here.