New role created and the user. user logon fails

Similar Questions

• The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  Install Firefox 4 beta that healed, but brought other problems.

  The Ask toolbar is initially in the version of Firefox 3.6.13. Obviously something in this extension is not compatible with a Firefox security patch. Disable this extension or uninstall it.

• Not able to open a session in Windows 7 message service user profile service does not logon and the user profile cannot be loaded

  the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
  My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-core

  Hi ravichandrans36,

  Thank you for using Microsoft Windows forum.

  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.

  To resolve this issue, follow these steps:

  1 delete the profile by using the computer properties dialog box. To do this, follow these steps:

  a. Click Start, right-click computer and then click Properties.
  b. click on change settings.
  c. in the System Properties dialog box, click the Advanced tab.
  d. under user profiles, click settings.
  e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
   
  2. Click Start, type regedit in the start search box and then press ENTER.

  3. Locate, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  4 right-click the SID that you want to delete and then click on remove.

  5 log on to the computer and create a new profile.

  For more information, see: http://support.microsoft.com/kb/947215

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Kind regards
  Aziz Nadeem - Microsoft Support

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• I had to change the Apple ID due to a new internet provider and the subsequent new e-mail address.  My iPhone and iPad constantly ask the password for my old user ID.  This is the password I know more knowledge or records.  What should do?

  I had to change the Apple ID due to a new internet provider and the subsequent new e-mail address.  My iPhone (5 c/9.3) continually pray for my old user ID password.  This is the password I know more knowledge or records.  How can I get the iPhone to recognize and use the new Apple ID rather than the old?

  What function or service on your phone asking you the code of the older?

  If iCloud, you must provide the Apple ID and the password that was used to connect. Call the Apple Support if you can't give it. They may be able to help. You are the original owner of the phone? You have the invoice/proof of purchase?

  Any service can be disconnected and then again.

• What is the difference between the role of support and the user role in the business group?

  I know there are a few differences between the role of support and the user role in the business as business group elements and Management group

  editable settings . But I can't find any document that introduces more precisely what they can do, what they can't.

  Are there any articles or documents or other means that can tell the specific differences between the Director, support and user group?

  If you have not taken a glance at this map permissions by GrantOrchard you should. It is very useful to know what permissions each user role. The big difference between the role of support and the user is that the user can only do things for themselves and user support can do things on behalf of other users. There is nothing quite as granular as you specified.

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Device and the user does not add security to the family account

  First post.

  Win8 running on a laptop. He was previously a partner in a family safety account, that I had put in place. I removed the unit and the user to try to resolve a problem with a web page. However, the account will now add the user or the device back to when clicking on many user form accounts for managing issues online.

  Family safety account is under my email address. laptop user is my child, who is defined as a child with a separate e-mail account. The security account for the family is still working and control another portable under win7 under a separate connection.

  Help!

  I managed to solve my problem.

  I created a new administrator account on the laptop under different parents email address.

  Logged in under that account, I was able to edit on behalf of a child who then it adds the new parental control under the new e-mail address of the parent.

  Only problem I have now is a child under a security account for the parental family and one under the other, but I can live with that...

  Steve

• The user profile Service and the user profile cannot be loaded

  My Windows Vista has just received an automatic update online.  Now I can login to my administrator account more.  I get two error messages) 1 the user profile Service does not logon and the user profile 2) cannot be loaded.

  I can sign in as a guest, but I don't see any of my documents and files as they are accessible only when I log in under my logon administrator... Help

  Try this:

  http://support.Microsoft.com/kb/947215

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Is it possible to export objects created by the user who is in system schema?

  Legends of dear,

  I need your help which is at - it a way to export the user objects created in the schema of the SYSTEM? Sorry I hope the question is silly, but unfortunately one of our user created all their objects in the SYSTEM schema.

  Oracle 11g XE Windows environment

  1. we try to identify objects created by the user of the SYSTEM.

  2. check the number and names of objects with tables, procedures, functions, triggers, and sequences.

  Thank you

  Knockaert

  karthiksingh_dba wrote:

  Legends of dear,

  I need your help which is at - it a way to export the user objects created in the schema of the SYSTEM? Sorry I hope the question is silly, but unfortunately one of our user created all their objects in the SYSTEM schema.

  Oracle 11g XE Windows environment

  1. we try to identify objects created by the user of the SYSTEM.

  2. check the number and names of objects with tables, procedures, functions, triggers, and sequences.

  Thank you

  Knockaert

  Search the object created recent & owned by SYSTEM.

  Since duhveloper object creation, then would have same DDL to repeat once again, in different schema.

  It is a professional organization that maintains the source code in the code repository?

• Screen saver turns on (Windows XP SP3) and lock the computer and the user cannot log back with their credentials without administrative rights

  When the screen saver is used and the user returns to open a session.

  they get...

  This workstation is in use and has been locked.
  The workstation can only be unlocked by user123 or an administrator.
  Press CTRL + ALT + DELETE to unlock this workstation.

  user123 cannot log back in. unless he made a system admin an administrator connections or user must reboot the machine to reconnect.

  Hello

  -Is the computer connected to a network domain?

  Please follow the steps mentioned below and get back to us with the results.

  Cannot lock a "locked" computer administrator.

  http://support.Microsoft.com/kb/242917

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  For more information, see the link below.

  Information about unlocking a workstation

  http://support.Microsoft.com/kb/281250

  If the computer is connected to a domain, I suggest you to post your questions in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope that helps!

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• Can I have my documents and the user profile on the same USB as my system?

  Hello

  I already have my documents and the user profile on a USB key. Can I copy an Image of the system on the same unit?

  Anne

  

  I'm saving My Documents and user profile on my USB key to back up regularly. I decided to do a system recovery disc set to DVD + R I have a set of 4 drives for my laptop. A free copy of MS allowing me to do.

  While it is tempting to use the DVD you already have, you could do yourself a disservice. What use would be if one of them turned out be wobbly when you need a year from now? Save the recovery image on an external hard drive would be much more reliable.

  I don't understand what you mean with "a free copy.

• I install Photoshop CC and the user interface is in french, but I want it in English (USA)

  I install Photoshop and the user interface is in french, but I want it in English (USA).

  I can't change it in the preference (only choice is Canadian French).

  I do french speeches (Montréal, Canada), but I have always used English with Adobe software.

  Hi MARCOPHOTO

  Please visit: http://forums.adobe.com/thread/1198174