New Vcenter server and host add

Similar Questions

• vCenter Server and host of version mismatch

  I have a version 5.0.0 vCenter Server (build 455964)

  I have 5 ESX host, and each of them is a different version-

  Host01 - 4.1.0 (build 348481)

  Host02 - 5.0.0 (build 469512)

  Host03 - 5.0.0 (build 469512)

  Host04 - 4.0.0 (build 208167)

  Host05 - 5.1.0 (build 799733)

  I am trying to add these ESX hosts to vCenter inventory, and I get all sorts of errors.

  This version will cause problems? Is it possible to add a vCenter server 5.0.x 4.x and 5.1.x hosts?

  Thank you.

  Support 5.1 ESXi, you go to vCenter 5.1.  vCenter is backward compatible with ESXi 5/4, but there are a few versions not supported (i.e. ESXi 4.1 with vCenter 5.0).

  See the matrix of compatibility for a complete list - http://partnerweb.vmware.com/comp_guide2/sim/interop_matrix.php.

• vCenter Server and Manager on the same virtual machine and on the same host ESXi update that they manage

  Hi all

  I have a question to which I did not respond.

  I have an ESXi 5 on Proliant DL380 G7 server host. I want to install vCenter Server and Manager Update on one of the Server 2008 R2 VM on the same host. I know it's possible, but my question is how Update manager will provide updates to the same ESXi host it will run on? The update is applied every time host must spend in maintenance mode and power off the virtual computer running on this subject which means he'll kill VM where vCenter Server and Update Manager is running and the update will fail right?

  Is that possible at all or the VCS and UM such as a virtual computer operating point is updated to other guests if you have them or vMotion as VM to another host when you want to update the VCS and UM host is running?

  Thanks in advance.

  It will not work.  You will need at least two hosts.  This way you can vMotion the vCenter VM to another host.  From there, you can use VUM.  Otherwise, you will need to patch the host as a stand-alone host.

  See below for patching a standalone host

  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.

• vCenter Server and SQL server affinity

  Is there a best practice for the rules of the affinity between a vCenter server and a SQL server VM in the same cluster?

  Thank you

  I think that separation would be mainly for safety.  Maybe to keep the SQL Server in a broadcast domain separate servers so that they do not receive all the Windows usual chatter.

  Most of the environments I've worked have been small enough to either do not have more than a few tens of machines virtual hosts/250, or overworked staff that cannot be dedicated to security, s/n, etc., and the decision was taken to run the DB in SQL Server on the same server as the application of vCenter to reduce the complexity and rely on the host/network/SQL Server security and properly locking to the bottom of vCenter.

  As I said before, there is a good chance you won't notice a difference, performance wise, anyway.

• New vCenter Server Hardware

  Hello

  I go to the construction of a new vCenter server to my upgrade to vSphere 5.  The server vCenter 4.1 existing will be decommisioned and a new vCenter 5 installed.  I will keep the existing SQL database however.

  All settings are since I was on the existing DB?  I don't need to execute one of this batch of data migration tool file I do?

  If you use an existing DB, you all that you need to do is create your ODBC connection, test it and install vCenter ' help and existing DB.  VCenter all the setting is preserved.

  The existing DB is external to the vCenter Server Correct?

• Is it possible to run vCenter Server and AUVS in the same database?

  Hello. My client has vCenter Server and VUM installed and running in the same database. Yes, the same database (not only same server database) and the same ODBC (ODBC VUM is 32-bit only).

  My question is whether it is supported or not and I would like a source VMware information, not only "it works fine for me".

  I can't find any definitive info on this VMware. Only something to wave in the installation and upgrade guides about or not to run in the same database ' ' (I guess they mean 'server') and it seems that the recommendation is to separate them for the 'large environments,' whatever that means.

  The environment vSphere 4.1 is currently, and there are about 20 guests and 150 virtual machines.

  If it is not supported, I guess the best way to go is to reinstall both from scratch?

  Thanks in advance!

  / Anders

  Yes, it is a supported configuration.  Since VUM and vCenter using different tables, you can share the same DB

  The database of the update manager that you use can be identical to the vCenter Server database. You can also use a
  separate database, or you can use existing database clusters. For best results in a large scale environment, you
  must use a dedicated Update Manager database that is located on one computer other than the
  the vCenter Server system database.

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-Update-Manager-50-install-Administration-Guide.PDF

• vCenter Server and vCenter server Essentials

  I want to install VMware Essentials Plus. VCenter Server and vCenter for two server products separate Essentials or are they the same products with different licenses?

  Concerning

  Marius

  VCenter server is a product with a different license

  1. the essential Kit

  2 Foundation

  3. standard

  Allocation of points for the useful and correct answer by clicking on the sub tab

• 5.1 ESXi host rest disconnected when it is connected to the new vCenter Server 6

  Hello

  I created a new version of vCenter Server 6.

  I have e vCenter Server 5.1 connect my 5.1 hosts.

  I want to connect hosts to the new vCenter and then upgrade to ESXi 6 guests.

  I disconnect hosts on the old vCenter.

  The I connect hosts to the new vCenter, and it happens with all the vm´s, etc..

  But it is disconnected.

  And it keeps beeing disconnected even when you try to connect again.

  If anyone has experienced this?

  Thank you

  Thomas

  Have you added these hosts in your new server vCenter along with their licenses?

  Otherwise, if please add host license in your vCenter license inventory and assign to those of your hosts and then try to re - connect.

• Displacement of the new vCenter Server (running on vDS) ESX hosts?

  Hi guys... as the title suggests... someone can guide me with how best to move the ESXi hosts on vDS linking a vCenter again vCenter?

  In addition, outside of losing performance stats, what are the other things I need to keep in mind?

  Thanks in advance.

  See you soon,.

  K

  Do you have a chance to see this KB

  VMware KB: Spend an ESX/ESXi host with vDS to a vCenter Server to another

  Thank you

  Avinash

• I can point my Lab Manager 4.0.2 to point to another new vCenter Server?

  Hi guys,.

  I have a client with a LM4.0.2 production and we are considering moving to one another new/a vCenter server.

  It is important to note that the new vCenter will NOT have the same DB or FULL of the old domain name. It's a completely different vCenter with other ESX hosts.

  Now the questions:

  Can I redirect my Lab Manager (VM) at the new vcenter without any problem?

  What of the ESX (resource) on the old vcenter?

  Is it possible to do this without downtime for laboratories? If this is not the case, how can I minimize downtime? cancel the deployment will be enough?

  Does anyone have this done successfully?

  Any comments would be much appreciated.

  Eyal

  etamir,

  There are some excellent discussions within this forum on the same topic.  I strongly suggest to read first, and I'll see if I can find an example.

  Before going further, data warehouses used in the new vCenter/ESX environment will be exactly the same as the current one?  If you want to keep all of your configurations, I need to know that the UUID of the LUN does not change during this process.

  Can I redirect my Lab Manager (VM) at the new vcenter without any problem?

  You can change the IP/domain FULL name vCenter in the settings section of the Lab Manager site... now on the problems that could result.

  You will need to remove anything from the GUI of Lab Manager that has to do with the current vCenter (unedploy, unprepare host esx, resource pools, configurations etc.).  There will be more on this in the dedicated thread

  What of the ESX (resource) on the old vcenter?

  ESX doesn't really matter, it's the data UUID store that matters.  ESX is just virtual machines.  Note: you'll want to throw all States/suspend points on the VMS where processors are different on the ESX hosts.

  > Is it possible to do this without downtime for laboratories?

  No, there will be a form any downtime.  Either that LM site will be useless (no resources with Betclic, consoles will does not work until the guests are prepared, etc.).

  > If not, how can I reduce downtime? cancel the deployment will be enough?

  Yes, to cancel the deployment of will help... but there will be some lag as you reconfigure Manager of laboratory to use the new vCenter.

  > Has anyone successfully done this?

  Yes.  I saw others to do this.

  Subjects in the sample: http://communities.vmware.com/message/1592762

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• New vCenter Server install fails - SSO

  I use a new system nested for a lab at home.  I'm under Workstation 9 with the latest version of vCenter.  I have the ms SQL all set up and verified.  The clocks are set to the same time a few seconds apart.  However, during installation when I get to vCenter single sign on Information, he returned with the error:

  Incorrect entry - a command line argument is wrong, a file is not found or the spec file does not contain the required information or the clocks on the two systems are not synchronized. Check vm_ssoreg.log in the temporary folder of the system for more details.

  I checked the two KB with information about this,

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2033880

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2033875

  and after the steps, I still can't pass it.  Then, I found this blog, http://blogs.vmware.com/kb/2012/09/vcenter-server-5-1-installation-fails-with-a-wrong-input-and-certificate-already-expired-error.html#.UWZSkJOThyI and reading, I get the assumption this isn't a big deal, however, I still can't complete the installation until it is fixed, at least as far as I know.

  I'm pretty new to this forum and to implement vmware but learn a lot, but this one left me speechless right now.

  Reflections on how to solve this problem, other things to test, etc.?

  David Seaman playing excellent series of blog on the configuration is

  http://derek858.blogspot.com.au/2012/09/VMware-vCenter-51-installation-part-1.html

  Michael Webster on his blog also has a great serise on certificates

  www.longwhiteclouds.com

• vCenter server and ESX versions

  Hello friends, can you please answer these questions:

  (1) what additional features we get in vCenter server Essentials

  in comparison with vCenter server Standard?

  (2) is it possible to have some ESX servers upgraded to 4.0

  3.5 in our infrastructure and some left at the same old ESX 3.5 level? Do

  they coexist? If they coexist, managing servers ESX 3.5 and ESX 4.0 with

  the same server vCenter 4.0?

  see you soon

  Jdsony5 wrote:

  (2) is it possible to have some ESX servers upgraded to 4.0

  3.5 in our infrastructure and some left at the same old ESX 3.5 level? Do

  they coexist? If they coexist, managing servers ESX 3.5 and ESX 4.0 with

  the same server vCenter 4.0?

  Yes, but you must have a license for 3.5 systems running server. The vSphere vCenter must be configured to point to this license server. One solution is to install this on the server vSphere vCenter and decomission license server when all the ESX servers running 4.x.

  Another option is to keep the old server licenses running and just the new vCenter for that one pint.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Behavior of server and database add-on... where is?

  After the last terrible day with lunch in Dremweaver CC 2015 (I hope that this disciplinary measure of Adobe take with those responsible for the disaster), I'm looking to restore all my webworks on version previous (2014), but I can't find "Server behavior & database add-on" on "Adobe add-ons" and without that find it me impossible to work.

  Where can I found it?

  Thank you

  Hi all

  This document installation of Extensions and Add-ons should help you to install add-ons and third-party extensions, go ahead.

  Thank you

  Preran

• The upgrade to vSphere + SQL Express to SQL 2005 + new vCenter Server

  Hello world

  It's the scénarion that I have today:

  A node just two HA/DRS cluster with vCenter 2.5 update 4 and two esx 3.5 update 4.

  The environment has increased enough to move from SQL Express to SQL 2005 standard. In the process, I want to upgrade the environment to vSphere and the vCenter move another box.

  I'm quite familiar with the process of vSphere upgrade but I donít know how to move the vCenter to another machine AND I do not know how to go from Express to the standard version of SQL in the process. (I have a SQL machine ready for use)

  I do not know how to handle all the changes here, I thought it would be nice to all move to the new machine and DB so that I could continue with the upgrade to vSphere, if this has meaning or not, I'm waiting for your ideas.

  I hope someone will give me some guidance on moving from SQL Express to SQL and how to move vCenter to another server (of course with a different server name and IP address)

  Thanks in advance for your support.

  I just did something very similar a few Sundays ago and it was really easy.  Refer to the section of the Upgrade Guide that talks about upgrading to vCenter on another Machine... (starts at p. 49).  We went from SQL 2003 32 bits on 32-bit Windows 2003 to SQL 2005 64-bit on Windows 2008 R2 64-bit.  Both are running as VMs - vCenter 2.5 is still there only as a license server - until I get all my hosts upgraded.