vCenter Server and Manager on the same virtual machine and on the same host ESXi update that they manage

Similar Questions

• Emergency aid - Vcenter Server down - cannot access the ESX host

  Hello

  Use two ESXi hosts and a Vcentre Server (virtual)

  When I added the hosts in the center of Virtual Server, I chose the option of locking down (I forgot the actual box, I chose) but he said something like on the virtual circuit can manage hosts?

  In any case the VC went offline, do not know why and I can't access the ESXi hosts using the VI client using the root username-password. I get the followign error:

  "You are not allowed to log on the server: server name.

  Yes, you need to disable the lock mode on ESXi - go to the console and in options, select turn off lockdown mode.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• VSphere from VMware vCenter Server Web Access from the Internet

  I tested VMware vSphere (ESX 4) and tried to connect to the internet for the Web Admin Access VM only.  I can connect the vCenter Server (on Windows) http Web Access features and manage the configuration of all virtual machines. But when I try to connect to an actual vm via MKS, I get an error MKS as ' unable to connect to the MKS: unable to connect to the xxx.xxx.xxx.xxx:902 server.»  The xxx.xxx.xxx.xxx is the IP address of the ESX Server HOST and not the Server vCenter (which administers the host).   I have ports 80, 443, 902 and 903, on the firewall, open to point to the server vCenter Server.  When I'm on the LAN, I can do everything without a problem. Its only when I try to connect directly from the internet through our firewall I get the above error.

  Someone at - it suggestions?

  Andrej770,

  vCenter Server transfers you to the ESX host hosting the virtual machine, and the remote console runs on port 902.

  You want to go directly to the ESX host on port 902 through the firewall to connect to the Virtual Machine console.

  You want to see the pages "Guide de Configuration ESX" 146 for more information.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_esx_server_config.PDF

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Is it possible to run vCenter Server and AUVS in the same database?

  Hello. My client has vCenter Server and VUM installed and running in the same database. Yes, the same database (not only same server database) and the same ODBC (ODBC VUM is 32-bit only).

  My question is whether it is supported or not and I would like a source VMware information, not only "it works fine for me".

  I can't find any definitive info on this VMware. Only something to wave in the installation and upgrade guides about or not to run in the same database ' ' (I guess they mean 'server') and it seems that the recommendation is to separate them for the 'large environments,' whatever that means.

  The environment vSphere 4.1 is currently, and there are about 20 guests and 150 virtual machines.

  If it is not supported, I guess the best way to go is to reinstall both from scratch?

  Thanks in advance!

  / Anders

  Yes, it is a supported configuration.  Since VUM and vCenter using different tables, you can share the same DB

  The database of the update manager that you use can be identical to the vCenter Server database. You can also use a
  separate database, or you can use existing database clusters. For best results in a large scale environment, you
  must use a dedicated Update Manager database that is located on one computer other than the
  the vCenter Server system database.

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-Update-Manager-50-install-Administration-Guide.PDF

• VShield service Manager installation and vShield app to the same host ESXi

  Hello, I'm planning on vCloud Director assessment in a laboratory with only a single ESXi host.  When I try to install the app vShield service I get the following warning: do not install on a host or a cluster where the VC or the vShield Manager resides. This can cause network problems. The following IP address must be a unique IP address assigned to this unit of App vShield. Please do not use an IP address that is assigned to another machine, including the VC, vShield Manager or any ESX host. Using an incorrect IP address you will need to uninstall and reinstall App vShield on this host. My question is: is it is absolutely impossible to install vShield manager on the same host ESXi as the vShield Manager resides?  Or is it just a bad practice?  What are the ramifications of installing?

  It is a general practice to separate management and resources. What you see is just a warning. When there are very fewer resources available you can do. Make sure that you exclude from the required VM by referring to this post

  http://www.yellow-bricks.com/2012/03/17/excluding-your-vCenter-server-from-VShield-app-protection/

• New Vcenter server and host add

  Hello, we are planning to create a new server Vcenter.  Had a bunch of weird issues with Vcenter.  Vcenter 5.1 on Windows running.  have not decided if we will use the VCenter, or create a new virtual machine from Windows to Vcenter again but I don't think that will count for my question.

  My plan is to turn off HA and DRS on the old server Vcenter, then remove a host from the old server Vcenter, and then add this host on the new Vcenter server.  Then just repeat the process for each host.

  My question is, should I turn off any virtual machine running on the hosts before removing the old server vcenter?

  If I remember correctly you have not, the virtual machine must remain in place and running, no connectivity should be lost and users should not not the difference.  We plan to do this off-peak hours, but there are always a couple of vm that are used 24/7.  It would be therefore rather not have to stop first.

  Thank you

  Hi defrogger

  Yes, it's the right way to migrate a new vCenter ESX Server.

  Disable HA/DRS and then disconnect the ESXi, vCenter server and plug them into the new vCenter.

  By disabling the DRS, you will lose the Resource Pools. So its maybe you assign only manual DRS.

  Another thing that many people forget are the options of the virtual machine on the cluster options. they have been set up again on the new cluster.

  BTW. There is a guide of vmware:

  VMware KB: Move a managed ESX ESXi host to a vCenter Server to a different Server vCenter

• vCenter Server and SQL server affinity

  Is there a best practice for the rules of the affinity between a vCenter server and a SQL server VM in the same cluster?

  Thank you

  I think that separation would be mainly for safety.  Maybe to keep the SQL Server in a broadcast domain separate servers so that they do not receive all the Windows usual chatter.

  Most of the environments I've worked have been small enough to either do not have more than a few tens of machines virtual hosts/250, or overworked staff that cannot be dedicated to security, s/n, etc., and the decision was taken to run the DB in SQL Server on the same server as the application of vCenter to reduce the complexity and rely on the host/network/SQL Server security and properly locking to the bottom of vCenter.

  As I said before, there is a good chance you won't notice a difference, performance wise, anyway.

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• vCenter Server and vCenter server Essentials

  I want to install VMware Essentials Plus. VCenter Server and vCenter for two server products separate Essentials or are they the same products with different licenses?

  Concerning

  Marius

  VCenter server is a product with a different license

  1. the essential Kit

  2 Foundation

  3. standard

  Allocation of points for the useful and correct answer by clicking on the sub tab

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• I ordered a student member, discount prepaid option yesterday and in the status of the order, it is said that they are waiting for the documentation. How do I provide this?

  I ordered a student member, discount prepaid option yesterday and in the status of the order, it is said that they are waiting for the documentation. How do I provide this?

  For more information about the provisions of the student/teacher, you can refer to the following information page:

  http://helpx.Adobe.com/x-productkb/policy-pricing/Education-FAQ.html#main_submit_poe

  Another good resource for information is the student and teacher edition information forum:

  http://forums.Adobe.com/community/download_install_setup/student_and_teacher_edition_infor mation_? view = discussions

  Here are some links about the Adobe student discount:
  http://www.Adobe.com/education/students.edu.html?showEduReq=Yes

  http://www.Adobe.com/education/student-eligibility-Guide.edu.html

  http://www.Adobe.com/education/students/how-to-buy-eligibility.edu.html

• I just downloaded photoshop elements 7.0 to a new box, and he said that my serial number is not valid.  the adobe support team indicates the number is valid, but that they cannot help me

  I just downloaded photoshop elements 7.0 to a new box, and he said that my serial number is not valid. the adobe support team indicates the number is valid, but that they cannot help me

  who cancel. Ugh... it was one of the other programs in the bundle of bamboo that was having a problem.  Thanks again for responding, I think I'm now covered for photoshop elements.

• Virtual machine is unable to ping host on vSphere5.1 fresh install

  Hello

  I did a new install of vSphere 5.1 (previously 4.1 installed that works well). No vCenter for now.

  Running a virtual machine on LAN Paessler PRTG under Win 2 k 3 x 64.

  This virtual machine has been moved from 4.1 to 5.1, nothing has changed.

  This virtual machine can't ping the host. No monitoring WMI class too.

  A physical computer on the LAN can ping on host vSphere with no problems.

  What's wrong?

  Thank you

  Vincent

  According to the screenshots, the subnet mask, you use in your local network is 255.255.0.0. As a first step, please run ipconfig / all in the virtual machine to verify that the virtual machine is configured with the same subnet mask. Secondly, run the ping command from the virtual machine, rattling of its own IP to see if it succeeds.

  BTW. What type/model of virtual network adapter is configured for the virtual computer?

  André

• I have problems to install the Microsoft 2007 12 updates. They all invariably fail with the following message details: ___Error error: Code 8007006E___Any ideas on how I can fix this? ___I have Microsoft Vista.

  I have problems to install the Microsoft 2007 12 updates.  They all invariably fail with the following error message:

  Error details: Code 8007006E

  Any ideas on how I can fix this?

  I've got Microsoft Vista.

  Hi 1proudmama
  Welcome to the Microsoft Answers Forum!
  We would like to know are these updates on Office 2007

  I recommend the methods are:
  Method 1:
  Step 1:
  Uninstall the update failed, if she is found in the installed updates, follow these steps
  i. open Control Panel from the start menu
  II. Select programs and features
  III. click Show on the installed update.
  IV. uninstall the update failed
      
  Step 2:
  Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same
  How to reset the Windows Update components: http://support.microsoft.com/kb/971058

  Step 3:
  Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the number of KB below: http://www.microsoft.com/downloads and check if the problem is resolved.

  Method 2:
  Run the SFC (System File Checker) on the computer scan to fix system errors to the file on the computer.
  To run a SFC scan, follow these steps:
  Open an elevated command prompt. To do this,
  i. Click Start,
  II. click principally made programs,
  III. click Accessories, right-click command prompt,
  IV. and then click Run as administrator.
  v. If you are prompted for an administrator password or a confirmation, type the password, or click on allow or continue.
  VI. at the command prompt, type sfc/scannow and press ENTER. Once the scan is complete, restart the computer so that the changes take effect

  Below link for reference: http://support.microsoft.com/kb/936212

  Thank you, and in what concerns:
  Samhrutha G S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.