Newbie get a compiler error

Similar Questions

• Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Can you indicate the corresponding code and the full error message?  Before the race going in your publication of Flash settings and select the option to enable debugging - it can help by adding information in the error message.

• UIScrollBar.scrollTarget = TLFTextField Gets the compiler error in Flash CS5

  Hello

  I would like to add a scroll bar to a TLFTextField, I know that this should be possible because in documentation official scrollTarget is DisplayObject.

  When I try to Flash CS5 gets compiler error telling me that scrollTarget accepts standard TextField.

  Code:

  var txt:TLFTextField = new TLFTextField();

  var scrollBar:UIScrollBar = new UIScrollBar();

  scrollBar.scrollTarget = txt; error

  Thank you very much

  F.

  I'm sorry but when I do what you suggest, I'm in this line of code... more if I notice that the compilation line goes well.

  I know it's really weird for me too.

  In any case, I'll check... Thank you very much for your support.

  EDIT: SOLVED

  the flash file was done using Flash CS4 and the UIScrollBar referenced from the library was probably a UiScrollBar CS4 because if I replace it with a new window / components / UIScrollBar all works fine!

• I'm trying to generate a chm on the net and I get a compilation error message

  Hi all

  I am trying to generate chm over the net, and the project even when I'm generating the same chm locally works fine, but when I try to generate the same chm on a network location, it gives me a compilation error and give up the generation. It is also to keep the chm open subsequently file, so I have to reboot the machine.

  It is working on a Windows XP Pro 32-bit RH7.

  Thank you

  It is not a question of project. RoboHelp is simply not designed to work this way, but like many things, some people can use them out of what they were designed for. However, just because some people can work this way, it follows not everyone can.

  I've seen people with projects on a network, and they say they have been doing it for years, it must be OK. A while later, they come back and say that the problem is solved since arriving it locally.

  Sorry, but it seems that you're stuck with working like you do or get your colleague to do so. It could be as simple as it is a bit different from your network.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• get a compilation error. I don't know why.

  I get error compilation than for NRMS_INTERFACE BODY of PACKAGE Compilation errors. PKGNDW
  
  Error: PLS-00113: identifier 'BOOLISDATAAVAILABLE' of the END must match 'PKGND' at line 1, column 29
  Line: 3309
  Text: end boolIsDataAvailable;
  
  
  function boolIsDataAvailable (o_errorcode ON the NUMBER,
  o_errortext OUT VARCHAR2) return a Boolean value is
  DataAccess number;
  Boolean boolResult;
  Start
  Start
  
  Select DATA_ACCESS
  in the DataAccess
  of INTERFACEPARAMETER
  where NUMBER_VALUE = 0;
  
  boolResult: = true;
  
  exception
  
  WHILE OTHERS THEN
  -Encoder assumes that all exceptions here will lead to data is only not available.
  boolResult: = false;
  
  
  
  
  end;
  return boolResult;
  end;
  
  end boolIsNDWAvailable;

  Hello
  You have an extra end at the end of your code.
  and to put an end to the square END boolIsNDWAvailable;

  Salim cordially.

  /* Formatted on 2009/09/08 15:11 (Formatter Plus v4.8.8) */
  FUNCTION boolisdataavailable (o_errorcode OUT NUMBER, o_errortext OUT VARCHAR2)
     RETURN BOOLEAN
  IS
     dataaccess   NUMBER;
     boolresult   BOOLEAN;
  BEGIN
     BEGIN
        SELECT data_access
          INTO dataaccess
          FROM interfaceparameter
         WHERE number_value = 0;
  
        boolresult := TRUE;
     EXCEPTION
        WHEN OTHERS
        THEN
  -- coder assumes that any exceptions here will lead to data not being available.
           boolresult := FALSE;
     END;
  
     RETURN boolresult;
  END ;
  

  Published by: Salim champion 2009-09-08 12:12

  Published by: Salim champion 2009-09-08 12:14

• Problem with SDK WebWorks 2.0.0.4, get a compile error...

  Well, at a time given, I had a fully functional software development kit, but it seems that he fell in some way and I hope that someone here has seen it, so I don't have to track it down.

  This started after I installed my signature on this system keys, don't know if it of related or not, but it's the only thing that has changed.

  Here's what I mean:

  C:\Program Search SDK WebWorks Motion\BlackBerry to Tablet 2.0.0.4
  \bbwp>bbwp 'c:\Projects\tbs\Hello World\HelloWorld.zip '.
  [INFO]                  Parsing of the command line options
  [INFO]                  Bbwp.properties analysis
  [INFO]                  Validation of archive WebWorks
  [INFO]                  The analysis of config.xml
  [WARNING]               Cannot find an element of
  [WARNING]               Can't find the item of
  [INFO]                  The application of filling source
  [INFO]                  Compiling applications WebWorks
  C:\Users\User\AppData\Local\Temp\widgetGen.12789641381305276725670.tmp\
  webworks\loadingScreen\Transitions.as(70): col: error 13: access undefined
  property Tweener.

  Tweener.removeTweens (loadingScreen);
  ^

  I then quite a few mistakes more is to say everywhere where Tweener Vienna of is not included...

  Tried to uninstall and ensuring that all records have disappeared, twice, without success.

  Someone at - it a good idea to place to look?

  Found my problem!  When I installed it I was pointed at the 4.5 for the AIR SDK folder, I reinstalled it with the weapon at the level of the blackberry-tablets-sdk folder - 1.0.1 and live now!

  Now, I come to cross the failure 500, unsigned bar file error during the deployment with a token of debugging...

• const compilation error

  Hello

  If I declare a const, which is based on a value previously declared const I get a compilation error:

  const int MY_INT_CONST1 = 10;  no error.
  const int MY_INT_CONST2 = MY_INT_CONST1 + 10; compile error: initializer must be constant

  I tried to search the Internet to see if this goes against ANSI-C, but did not find the relevant answer.

  Anyone who knows and who have a source of information?

  Thank you!

  dml72

  Hello

  As I remember, in ansi C, global variables must be initialized by constants.
  So, we can write:
  # define MYVAR 5
  int a = MYVAR;
  because the preprocessor replace MYVAR by 5 before compiling the sources.

  But if we write
  const int a = 1;
  const int b = a;

  We want to initialize b with the value of a, which is a global variable and the compiler should detect an error (declare a constant variable will generate a compiler error if the variable is reassigned to the program, but is still a variableand not a constant).

  The same compilation error should appear if write us in the global section

  int a = 1;

  int b = a;

  int c = myFunc ();

  However in the locals, initialiseur initializer is not necessary to be consistent, so we can write

  void myFunc (void) {}
  const a = 1;
  const b = a;
  c const = myfunction2 ();
  ...
  }

  In summary, the keyword "const" is not the reason for this error, you can add or remove this keyword, the error will always be the same.

  It is simply impossible to initialize a global variable with another variable as global variables are initialized before executing any statement.

  Concerning

  Etienne

• 2015.1 Media Encoder / first - can not restore unknown, compilation error

  Hello

  I do an edit very basic multicamera premiered with only a Lumerti color filter and a Multiband Compressor filter on the audio.  I can't get something to export into Media Encoder successfully.  I keep getting unknown compilation errors at different locations along the export.  I did the same type of work before the update and it worked perfectly.  I tried a lot of different codecs and formats - same problem.  I'm on a Mac Pro end of 2013 on 10.11.2 with AMD D500s.

  Is there any solution for this?  I'm not asking the program to do complicated things where should be unknown random compile errors.  I can't even help out it is because newspapers don't offer any information.

  Thank you!

  Chris

  Neil et al..,.

  I went down a long conversation with Adobe and they made me know that my Mac specific Pro with D500s driver with the Open CL Mercury GPU Rendering problems.  Reported memory is not updated quickly enough, and absence of export.  Apple was supposed to fix 10.11.2 but didn't.  They will look into the problem more.  I just had this problem on Mutli-cam since this type of rendering is more intensive than a regular calendar GPU.  The solution uses the rendering software until Apple fixes the drivers.

  Thanks for the help Neil!

• Shared folders compile error - VMware Tools 9.6.0 - Ubuntu 13.10

  I am running Ubuntu 13.10 as a guest in Windows 7 using VMware Workstation 10.0.0.

  When you try to install VMware Tools 9.6.0 I get this compilation error:

  Using 2.6.x kernel build system.
  do: enter the directory "/ tmp/modconfig-wX4US5/vmhgfs-only.
  / usr/bin/make /lib/modules/3.11.0-12-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \
  MODULEBUILDDIR = modules
  make [1]: Entering directory ' / usr/src/linux-headers-3.11.0-12-generic'
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/backdoor.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/backdoorGcc64.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/bdhandler.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/cpName.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/cpNameLinux.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/cpNameLite.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/dentry.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/dir.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/file.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/filesystem.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/fsutil.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/hgfsBd.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/hgfsEscape.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/hgfsUtil.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/inode.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/link.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/message.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/module.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/page.o
  /tmp/modconfig-wX4US5/vmhgfs-only/inode.c: in function 'HgfsPermission ':
  /tmp/modconfig-wX4US5/vmhgfs-only/inode.c:1893:29: error: 'struct dentry' has no member named 'd_count '.
  DCount int = dentry-> d_count;
  ^
  make [2]: * [/ tmp/modconfig-wX4US5/vmhgfs-only/inode.o] error 1
  make [2]: * waiting unfinished...
  make [1]: * [_module_/tmp/modconfig wX4US5/vmhgfs-only] error 2
  make [1]: leaving directory ' / usr/src/linux-headers-3.11.0-12-generic'
  make: * [vmhgfs.ko] error 2
  make: leaving directory ' / tmp/modconfig-wX4US5/vmhgfs-only.

  Any ideas appreciated how overcome this problem.

  Hi, jjohanson

  Sorry for the late reply.

  Please upgrade your WS 10.0.1.

  Concerning

  Xisheng

• Compilation error when you use is NOT in condition with CQL

  Hello
  
  I have a problem using NOT IN my CQL status. I'm passing an id of the view in my arguments with NOT IN condition. Here's my query:
  
  < id view = schema "V1" = "accesscode" > <! [CDATA]
  IStream (select distinct ghpTmNumberingPlan.accesscode as ghpTmNumberingPlan accesscode,
  trafficaStream [now])
  []] >
  < / view >
  < request id = "InvalidDataQuery" > <! [CDATA]
  Select
  trafficaStream.a_bearer_service,
  trafficaStream.a_bsc,
  trafficaStream.a_bssmap_cause,
  trafficaStream.a_bssmap_cause_ext,
  trafficaStream.a_category,
  trafficaStream.a_cell,
  trafficaStream.a_cgr,
  trafficaStream.a_channel_rate_proposed,
  trafficaStream.a_channel_rate_used,
  trafficaStream.a_controlling_iw_mgw_id,
  trafficaStream.a_data_bcie_octet_5a_used,
  trafficaStream.a_direction_number,
  trafficaStream.a_direction_number_type,
  trafficaStream.a_ext_cause
  of trafficaStream [now], ghpTmNumberingPlan
  where trafficaStream.a_direction_number.substring (2.5) NOT IN (V1)
  []] >
  < / query >
  
  Furthermore, ghpTmNumberingPlan is a database table, I join it with a stream of data because I am also getting error of compilation if I didn't join with a stream of s [now].
  I get the compile error is partly "NOT IN (V1). I get Red underscore with V1 and here is the message of the compiler:
  
  Invalid statement: "select".
  
  trafficaStream.a_bearer_service,
  
  trafficaStream.a_bsc,
  
  trafficaStream.a_bssmap_cause,
  
  trafficaStream.a_bssmap_cause_ext,
  
  trafficaStream.a_category,
  
  trafficaStream.a_cell,
  
  trafficaStream.a_cgr,
  
  trafficaStream.a_channel_rate_proposed,
  
  trafficaStream.a_channel_rate_used,
  
  trafficaStream.a_controlling_iw_mgw_id,
  
  trafficaStream.a_data_bcie_octet_5a_used,
  
  trafficaStream.a_direction_number,
  
  trafficaStream.a_direction_number_type,
  
  trafficaStream.a_ext_cause
  Of
  trafficaStream [now], ghpTmNumberingPlan
  where
  trafficaStream.a_direction_number.substring (2.5)
  "NOT IN (> > V1 < <).
  Cause: no attribute with name V1 in
  metadata
  Action: Supply a valid attribute name.
  
  
  Can someone please help, I am trying to solve this problem for 4 days already. Thanks in advance.
  
  Published by: user13004801 on June 3, 2010 03:44

  Hello

  Can you please try the following query (just check the spellings of the fields/attributes):

  Define V1 as:

  RSTREAM)
  SELECT
  trafficaStream.a_bearer_service,
  trafficaStream.a_bsc,
  trafficaStream.a_bssmap_cause,
  trafficaStream.a_bssmap_cause_ext,
  trafficaStream.a_category,
  trafficaStream.a_cell,
  trafficaStream.a_cgr,
  trafficaStream.a_channel_rate_proposed,
  trafficaStream.a_channel_rate_used,
  trafficaStream.a_controlling_iw_mgw_id,
  trafficaStream.a_data_bcie_octet_5a_used,
  trafficaStream.a_direction_number,
  trafficaStream.a_direction_number_type,
  trafficaStream.a_ext_cause
  ghpTmNumberingPlan.accesscode

  OF trafficaStream [now] LEFT OUTER JOIN ghpTmNumberingPlan

  WE trafficaStream.a_direction_number.substring (2,5) = ghpTmNumberingPlan.accesscode)

  Define Q1 as:
  SELECT * FROM V1 WHERE V1.accesscode is set to NULL;

  Thank you best regards &,.
  Sandeep

• CommandText compilation error

  In Dreamweaver, I have configured a filter of database with the following command:
  
  CommandText = "< % #" SELECT PGCCalenderALLYears.EventDate, PGCCalenderALLYears.Event, PGCCalenderALLYears.EventTime, PGCCalenderALLYears.Day, PGCCalenderALLYears.Venue FROM PGCCalenderALLYears WHERE (((PGCCalenderALLYears.EventDate) > DateValue (now())) AND ((PGCCalenderALLYears.EventDate) < DateValue (NOW () + 2)) AND (PGCCalenderALLYears.VENUE = "HOME")) ' % > ' "
  
  And the test in Dreamweaver button works fine. However, when I try this in a browser, I get a compilation error:
  Compiler error message: BC32017: comma, ')', or a continuation of expression valid expected.
  
  It seems that he does not like the quotes surrounding the meeting place, that I can understand. Weird that Dreamweaver is OK with that, but it fails in real life!
  
  In any case - is there a way to specify a fixed value in the CommandText?
  

  Try

  CommandText =< %="" #="">
  PGCCalenderALLYears.Event, PGCCalenderALLYears.EventTime,
  PGCCalenderALLYears.Day, PGCCalenderALLYears.Venue FROM PGCCalenderALLYears < br=""> WHERE (((PGCCalenderALLYears.EventDate) > DateValue (now()))) AND < br=""> ((PGCCalenderALLYears.EventDate) < datevalue="" (now="" ()="" +="" 2))="" and=""> < br=""> (PGCCalenderALLYears.VENUE = 'HOME') ' %>))

  --
  Jules
  http://www.Charon.co.UK/charoncart
  Charon Cart 3
  Shopping Cart Extension for Dreamweaver MX/MX 2004

• Always get compile errors in scott.emp

  Hi Experts,
  I get compilation errors when I compile a package body:
  

  CREATE OR REPLACE PACKAGE TABLE_EXAMPLE AS
  TYPE TNAME IS RECORD(PARAMETER EMP%ROWTYPE,VALUE EMP%ROWTYPE);
  TYPE TABLET IS TABLE OF TNAME;
  TYPE EMP_TABLE IS TABLE OF EMP%ROWTYPE;
  PROCEDURE P1(ARG IN TABLE_EXAMPLE.TABLET);
  END;

  CREATE TABLE TAB_PAR
    (PARAMETER  VARCHAR2(100 ),
    PA_VALUE   VARCHAR2(100)
  );

  create or replace package body table_example as
  PROCEDURE P1(ARG IN TABLE_EXAMPLE.TABLET) as
  l_emp_tbl emp_table:=emp_table() ;
  cursor c is select * from emp;
  
  err_msg varchar2(1000);
  err_code number;
  
  
  begin
  
  
  
  
  for m in 1..arg.count loop
  
  
  insert into tab_par(parameter,pa_value) values (arg(m).parameter,arg(m).value);
  
  end loop;
  
  exception
  when others then 
  err_msg:=sqlerrm;
  err_code:=sqlcode;
  dbms_output.put_line(sqlerrm);
  end;
   
  end  table_example;
  
  Warning: Package Body created with compilation errors.
  
  LINE/COL ERROR
  -------- ---------------------------------------
  20/49    PLS-00382: expression is of wrong type
  20/66    PLS-00382: expression is of wrong type

  How to solve this?
  Thank you.

  Hello
  Why do you use

  TABLE_EXAMPLE.tablet
  

  In the world
  Just change it to TABLET and it should compile correctly.
  This is what I did and it works fine

  CREATE OR REPLACE PACKAGE TABLE_EXAMPLE2 AS
  TYPE TNAME IS RECORD(P_PARAMETER varchar2(100),P_VALUE varchar2(100));
  TYPE TABLET IS TABLE OF TNAME;
  PROCEDURE P1(ARG IN TABLET);
  END;
  
  create or replace package body table_example2 AS
  
  PROCEDURE P1(ARG IN TABLET) as
  begin
  for m in 1..arg.last loop
  
  insert into tab_par(parameter,pa_value) values (arg(m).p_parameter,arg(m).p_value);
  
  end loop;
  
  end;
  
  end  table_example2;
        
  

  See you soon!
  Bobin

• get compilation errors during migration of weblogic7.0 to 9.2

  I get compilation errors for my request during the migration of weblogic7.0 to weblogic9.2. These errors are specific to the weblogic.servlet.FileServlet, weblogic.servlet.WebAppServletContext, and weblogic. Security-related packages.
  In the code of the application itself is called Fileservlet classes. WebAppServletContext calls the getWar() method.
  I found these classes and methods are not api weblogic9.2 and weblogic7.0 api as well.
  
  But it is having compiled without error in weblogic7.0 and it's errors in weblogic9.2.
  
  Can anyone suggest sort of like any changes of the configuration necessary for it to fix these errors of compilation.

  This information can be provided by the support the Oracle customer... Because the missing methods belongs to 'Internal API to WebLogic' and no official docs are available from outside the world of oracle because of the internal API.

  Thank you
  Jay SenSharma

• CityInfo compiler error

  I'm a newbe working through the samples in the development of BlackBerry device applications getting started guide. I can't CityInfo.java to compile any help? compiler error is in blue commented above the code that causes the error in red

  Thank you

  Jack

  /**

  * CityInfo.java

  * Copyright (C) 2001-2008 research In Motion Limited. All rights reserved.

  */

  Net.rim.device.api.ui import. *;

  Import net.rim.device.api.ui.UiApplication;

  Net.rim.device.api.ui.component import. *;

  Net.rim.device.api.ui.container import. *;

  SerializableAttribute public class CityInfo extends UiApplication {}

  Public Shared Sub main (String [] args) {}

  CityInfo app = new CityInfo();

  app.enterEventDispatcher ();

  }

  public CityInfo() {}

  pushScreen (new CityInfoScreen());

  }

  }

  final CityInfoScreen class extends form {}

  Private InfoScreen _infoScreen;

  Private ObjectChoiceField choiceField;

  private int select;

  public CityInfoScreen() {}

  Super();

  LabelField title = new LabelField ("City Information Kiosk",

  LabelField.ELLIPSIS | LabelField.USE_ALL_WIDTH);

  setTitle (title);

  Add (new RichTextField ("US cities"));

  Choice of String() = {'Los Angeles', "Chicago," "New York"};

  choiceField = new ObjectChoiceField ("select a city", choice).

  Add (choiceField);

  }

  public boolean onClose() {}

  Dialog.Alert ("Goodbye!");

  System.Exit (0);

  Returns true;

  }

  _viewItem private MenuItem = new MenuItem ("other info", 110, 10) {}

  public void run() {}

  Select = choiceField.getSelectedIndex ();

  _infoScreen = new InfoScreen();

  C:\Users\Jack\Documents\NetBeansProjects\MobileApplication3\src\CityInfo.Java:67: cannot find symbol

  symbol: variable getUiApplication

  location: net.rim.device.api.ui.UiApplication of the class

  UiApplication.getUiApplication.pushScreen (_infoScreen);

  1 error

  UiApplication.getUiApplication.pushScreen (_infoScreen);

  }

  };

  private MenuItem _closeItem = new MenuItem {("close", 200000, 10)

  public void run() {}

  onClose();

  }

  };

  protected void makeMenu (menu Menu, for example int) {}

  menu. Add (_viewItem);

  menu. Add (_closeItem);

  }

  private class InfoScreen extends form {}

  public InfoScreen() {}

  Super();

  LabelField lf = new LabelField();

  BasicEditField popField = new BasicEditField ("Population:", null, 20, Field.READONLY);

  BasicEditField stateField = new BasicEditField ("status:", null, 20, Field.READONLY);

  BasicEditField sightsField = new BasicEditField ("sites:", null, 50, Field.READONLY);

  Add (LF);

  Add (new SeparatorField());

  Add (popField);

  Add (stateField);

  Add (sightsField);

  If (select == 0) {}

  lf.setText ("Los Angeles");

  popField.setText ("3,694,820");

  stateField.setText ("California");

  sightsField.setText ("Hollywood");

  } ElseIf (select == 1) {}

  lf.setText ("Chicago");

  popField.setText ("2,896,016");

  stateField.setText ("Illinois");

  sightsField.setText ("Blues Clubs");

  } ElseIf (select == 2) {}

  lf.setText ("New York");

  popField.setText ("8,008,278");

  stateField.setText ("New York");

  sightsField.setText ("Broadway");

  }

  }

  }

  }

  This line:

  UiApplication.getUiApplication.pushScreen)

  must be:

  UiApplication.getUiApplication () .pushScreen)

• get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

  I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

  Laptop is a HP Pavilion DV6700.

  Any help would appreciated more than you know.

  The system is Windows Vista 32 bit

  The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

  Hello:

  See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul