Newbie: Mobile Server and Oracle DB must be on the same server?

Similar Questions

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Multiple instances of oracle with characterset different on the same server database

  Hello

  We are finalizing plans to install Automic (software scheduliong formerly UC4) for our suite of retail applications and replace Uc4.

  The process came to know that Automic does not support AL32UTF8 database characterset.

  At this moment we have RMS and UC4 UC4 supports AL32UTF8 and schema for UC4 running on the same database server is inside the RMS database.

  From now on, it is recommended to have a separate database instance on the same server as the RMS database and with a different characterset which is WE8MSWIN1252.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  The utility Automic we want to use is not compatible AL32UTF8 and manage only a database of character set WE8MSWIN1252.

  Any help and advice would be much appreciated.

  Thank you

  RAM.

  PL post OS and database versions.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  Yes - without any doubt - two databases are independent and have nothing to do with each other.

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  You may have - to test the export/import process rigorously. If your source is AL32UTF8 and target is WE8MSWIN1252, data loss may occur for those characters that are in the former, but not the last.

  HTH
  Srini

• What are the vSphere components must be on the same subnet?

  VSphere components, those who need to be on the same subnet / vLAN?

  For example:

  vCenter Server and ESXi hosts?

  Groups separated from ESXi hosts are on separate VLANS / subnets? What is the limit of the number of hosts ESXi I should have on one vLAN to avoid having too much broadcast traffic?

  vCenter Server and he associated with SQL Server?

  VMware Update Manager and vCenter Server?

  VMware Update Manager and ESXi hosts it updated?

  There is no technical requirement that vSphere components must be on the same IP subnet. You can have all the components on a separate and routed (or even a firewall, you implement granted sufficient rules) subnet without problems. If that made sense, however, is a completely different question.

  vCenter Server and ESXi hosts?

  Does not really matter, but makes the most sense to be on the same subnet.

  Groups separated from ESXi hosts are on separate VLANS / subnets? What is the limit of the number of hosts ESXi I should have on one vLAN to avoid having too much broadcast traffic?

  If they are managed by the same vCenter, or similar commercial purposes, I would put them on the same subnet. I only consider something a subnet extra for things like DMZ-Clusters, that can be distinguished from any other as much as possible. A vMotion VLAN cluster might be a correct point in a normal scenario too.

  ESXi hosts really do not generate any significant broadcast traffic, apart from a few ARP requests here and there. This isn't Windows, after all, and even if that were the case, the time when you had to worry about the reasons broadcasting with 'only' a few hundreds or thousands of systems on a broadcast domain have long been more with the advent of fast and gigabit ethernet.

  vCenter Server and he associated with SQL Server?

  VMware Update Manager and vCenter Server?

  Even once it does not really matter, but I would put them on the same subnet unless I have a very good reason not to.

  VMware Update Manager and ESXi hosts it updated?

  As long as they are not connected via a WAN snail, causing the staging of updates hours, that's fine.

• When I try my ipad FaceTime I get this massage iphone is not available your phone must be on the same WiFi that this ipad to make a call

  When I try my ipad FaceTime I get this massage iphone is not available your phone must be on the same WiFi that this ipad to make a call

  In your FaceTime settings, what you defined as "Caller ID"?  If you have set up the continuity (continuity use to connect your iPhone, iPod touch and Mac - Apple Support) and you have the iPad set to use your iPhone phone number to initiate calls, then you will need to have your iPhone and your iPad connected on the same wifi ntetwork.

  If you set the iPad caller ID to call from, for example, your iCloud email address, then this message should disappear.

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• Transaction and transaction AppModule Taskflow both are the same or not?

  Transaction and transaction AppModule Taskflow both are the same or not? or what are the differences between these two operations.

  Workflow transaction is different from the transaction data base (I mean the transaction returned by am.getDBTransaction ()). Each workflow is associated with a data control framework. A data control framework is the container that is associated with a workflow that contains several instances of data control. The ADF Model layer exposes the DataControlFrame interface to manage a transaction involving data controls in the framework. DataControlFrame interface exposes methods such as:

  • beginTransaction()
  • Commit()
  • Rollback()
  • createSavepoint () - Note that it is the backup point maintained by the controller of Oracle ADF and it is similar to the point of backup of database
  • isTransactionDirty()

  Task Transaction flow

  There are four transaction options that a stubborn workflow can use (notice that unbounded flow task does not support transactions):

  1. No Transaction controller: delimited task called flow does not participate in the management of transactions any controller ADF.
  2. Always Begin new Transaction: A new transaction begins when the stubborn workflow is entered, regardless of whether a transaction is in progress. The new transaction ends when the stubborn workflow stops.
  3. Always Use Existing Transaction: When it is called, the stubborn workflow participate in an existing transaction already underway.
  4. Use the existing if Possible Transaction: when it is called, the stubborn workflow is involved either in an existing transaction if there is, or starts a new transaction when the entrance to the stubborn workflow, if one does not exist.

• I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Please help, I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Hi Francis,.

  Make sure you download both files from there. https://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  Compare the size of the file and you will have to perhaps disable all anitvirus during download and install it.

  Thank you

  Scott

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• REP-1248, all sources of placeholder columns must be in the same group

  Hi all
  
  I'm developing a (10g) report that contains three executives of repetition, say R1, R2, R3. Independent of each other, not connected or linked.
  I have a column defined in each summary of groups, G1, G2, G3, associated with R1, R2, and R3 to count the number of records in each group say. If the three groups count is 0, there is an another framework, I have defined, M1, containing the text as "No record found" that should be displayed.
  I can not access the summary columns defined in the format of M1 trigger groups because it is separated from R1, R2, and R3. So I created a column placeholder CP1, which recognizes the M1.
  But I'm not able to set the value of CP1 to the sum of analytical columns CS1, CS2, CS3 in the formula trigger of the CP1.
  I get the error:
  REP-1248 all sources of placeholder columns must be in the same group
  
  I also tried to set the value of the CP1 in CS1, CS2, and CS3 formula columns to get the same error.
  
  Is it possible to be able to use the analytical columns within the groups to have the feature above?
  
  Thank you
  Shruti

  create a place holder cp_1 in the external data model of all queries

  in each query, create a numerical formula
  with this code

  Start
  : cp_1: = nvl(:cp_1,0) + 1;
  Return 1;
  end;

  the nvl if she is not so necessary to the placeholder sets the initial value of zero

  then in the text frame properties go to conditional formatting
  Then create a new exception format

  cp_1 top to hide 0
  and then the work.

• FLVplayback video must be in the same directory?

  I try my video of loading a swf file using the flvplayback component by using the script below

  ///////////////////////////////////////////////////////

  Import fl.video.FLVPlayback;

  var flvPlayback:FLVPlayback = new FLVPlayback();

  flvPlayback.autoPlay = false;

  flvPlayback.source = '. '. ' / video/Listening_to_Community_Voices.flv ";

  flvPlayback.skin = "SkinOverAllNoFullNoCaption.swf";

  flvPlayback.x = 31;

  flvPlayback.y = 123.8;

  addChild (flvPlayback);

  //////////////////////////////////////////////////////

  but I noticed that the SWF doesn't link to the video instead, I have to place my video the same directory with the swf file and set up

  flvPlayback.source = "Listening_to_Community_Voices.flv";

  -What means the connection between the im video file must be on the same directory the SWF or I wrote my code wrong...?
  

  I discovered the cause already, I have to remove the ". /"symbol when you do nested path, it's weird though because normally connecting other swf files will need to add the symbol, but not video..."

• How to play stereo mix music and sing in my microphone at the same time?

  Hi guys, need help with Realtek HD audio driver

  I want to play stereo mix music and sing in my microphone at the same time... not for registration but in chat room, say.

  I'm using XP... Toshiba Satellite S4747 laptop
  In the Realtek software "Realtek HD audio input" microphone and two stereo mix... but I can only select one at a time...

  All solutions please thxxxx

  On a different note... a friend of mine using a non-Toshiba laptop with win XP has an older version of the Realtek audio driver and select the mic and stereo mix at the same time... I downloaded this version in my laptop, but still, I can choose only one at a time...

  Check that the audio settings of Windows and don t forget in the Realtek HD audio Manager. You can find it in the control panel.

  I think that your microphone is on Mute check so this.

• How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  I find easier to use this copy separate Automator Service (download Dropbox).

  To install in your numbers > Services, double-click menu just the package downloaded .workflow and if necessary give permissions in system preferences > security & privacy.

  To use, just:

  1. Select the cells in the column with duplicate names.
  2. Choose separate copy in numbers > Services menu.
  3. Click once in the upper cell where you want the deduplicated values appear.
  4. Command-v to paste.

  SG

• j105el envy: envy of hp can not right and made a left click at the same time

  my hp touchpad cant hp envy envy cannot not right and made a left click at the same time. I don't know if it's a driver. because of this I can not play games like GTA cause I need do a right click to aim and left click to shoot. is there a solution to this

  @gwatanaj ,

  Hello and thanks for the display on the HP support forums.  Here is a link that may be useful.

  HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8)

  What you are trying to do may not work with your touchpad.  Normally when it is best to use a mouse.  The hardware is built to be different and you might find it easier to work with.

  If you need help please post back.  First of all, check out this link.

  Tips for the "very best question.

  So, please indicate your model full and product number.

  I hope hear from you soon.

  Thanks again and have a great day.

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html