Newbie: windows form designer generated code

Similar Questions

• After reisntalling windows xp pro no code generated to activate windows

  I reinstalled windows xp professional due to a computer failure, but now I can not activate because the identification number of the installation is not generated to call on the phone to activate windows.  How can I active windows xp because the code does not generate?

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see all at the same time, of

  Hello

  My name is Ellie and I am new to Dreamweaver.

  I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see everything at the same time, design, HTML and CSS?

  Thank you

  It ends up something like that...

  

• Windows Vista update error code 00000646 & dt000

  Dear Sir/Madam,

  I have a problem with windows update, when I updated windows, it says that the error code 00000646 & dt000. can anyone help my problem help me please.

  Thank you.

  * original title - Windows update 00000646 error code & dt000, how can I solve this kind of problem? Please help TI

  Dear Sir/Madam,

  I have a problem with windows update, when I updated windows, it says that the error code 00000646 & dt000. can anyone help my problem help me please.

  Thank you.

  Hey League kang

  Follow the advice of microsoft at the link below

  This problem occurs when Windows Setup encounters an error. Error code 0 x 80070646 and error code 646 are generated by Windows Installer. These generic errors indicate that Windows Installer has encountered a problem. When you encounter errors that are described in the section "Symptoms", the problem may be caused by an incorrect value in the registry.

  http://support.Microsoft.com/kb/2258121/en-us

  for all other windows updates to repost questions in the forum updated windows OK

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Help me to integrate the generated code in a project of ndk/cascades

  Please ignore my expert status because it is only related to java, my knowledge of c / c ++ is mainly going back to University.

  My goal:

  Call a function on the services Web Microsoft Exchange (EWS).

  What I'm trying:

  (1) I downloaded Wsutil.exe, a tool for generating a wsdl c code

  See http://msdn.microsoft.com/en-us/library/windows/desktop/dd430644(v=vs.85).aspx

  (it's in the windows SDK

  (2) I call the utility with the Exchange webservice wsdl/xsd, it generates several c-h-files and

  (3) I have open Momentics with sample hellocascades

  (4) I throw all files c/h in the CBC hellocascades folder, add #include to the three h files generated and press compilation

  (5) I get a lot of mistakes, for example 'WCHAR' does not designate a type

  Is it possible that the generated code is only for Visual Studio and Momentics needs of other imports or something like that?

  I have attached the thus generated code classes (wsdl and xsd) Web services, but no Wsutil.exe and wsutilhelper.dll I don't like executables sent by unknown people myself.

  I know this isn't the best way to start, but I need a real target and compile helloworld does not give me a thing.

  If someone had a little bit of time to give me some advice here, I would be grateful.

  I have renounced the wws, does dependency after dependency, and even with the full SDK installed, I have not found all the required files h.
  opening a new thread for gsoap now

• Windows Activation error: Error Code 0 x 080070005

  I'm not sure what I did, but after I added a hard drive 3 TB to my turn, Windows has been telling me that it must be enabled, and every time I try to activate it online, I get the error message saying "a problem occurred when Windows tried to activate. Error code 0x80070005. "When I click on more options, he said: I need"higher authority"(I am the administrator and have administrator privileges) to activate it, but I don't know what this means, or even if there is something higher than the administrator. I'm sure that there is not, but I could be wrong.  I ran the MGAD tool, and that's what it came with:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - FQ4RC - D8J8F-8PMY4
  The Windows Product Key hash: xZs5oWmf/L8h3bJIUNPlkcCJBA8 =
  Windows product ID: 00359-OEM-8703737-45825
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {E53A065F-EB4C-405A-8CC4-311009AAEA62} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.110622 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E53A065F-EB4C-405A-8CC4-311009AAEA62}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-8PMY400359-OEM-8703737-458253S-1-5-21-2558717277-3355826656-150721232Gigabyte Technology Co., Ltd.. GA-970-a-UD3 Award Software International, Inc.. F4 20111013000000.000000 + 0004E533907018400FA04090409Time(GMT-05:00) Standard is03109

  Content Spsys.log: 0 x 80070002

  License data-->
  C:\Windows\system32\slmgr.vbs(1333, 5) Microsoft VBScript runtime error: permission denied

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 12:7:2011 22:54
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEABAABAAEAAAABAAAAAQABAAEA6GFSisZs3N/cFRAzVPL2kVxvzppcpo4u

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  SSDT PTLTD POWERNOW
  MSDM GBT GBTUACPI
  CARPET GBT
  TAMG GBT GBT B0
  CARPET GBT

  The only thing I have changed in the last month is that I am a new processor and motherboard, and it worked well upward until a few nights ago.  Come to think of it, it didn't happen until the new year.  I added the hard drive Saturday night and did not get the error message until I logged on my computer the next day morning.  Could there be something wrong with the timestamp or something? That would cause a problem like this?

  Change the motherboard invalidates an OEM system builder license.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  OEM licenses must be installed by professional system manufacturers. Under Microsoft's OEM license agreement, they should not be sold to end-users under any circumstances, must be preinstalled on a computer using the preinstallation OEM (OPK) before delivery to the customer and include to the at least the manufacturer contact information. They are, therefore, designed for installation only on a single computer and are not transferable, even if the original computer is no longer in use. This isn't usually a problem for users who buy a new computer, because systems that most pre-assembled systems ship with a preinstalled operating system. There are very few circumstances where Microsoft will allow the transfer of licensed OEM for a non-functional system to another, but the OEM System Builder License Agreement (SBLA), as well as the EULA (EULA) OEM contract don't contain any provision for this, it is entirely at the discretion of Microsoft, depending on the situation

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx

  --------------
  You can try the following:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  then:
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  There is no guarantee, it will be reactivated because its OEM license.

• ﷯Error: could not generate code to activate one or several web fonts on the page "about". [Error 500]

  Hi all

  I get this error message when I try to upload my site on an FTP server: ﷯Error: could not generate code to activate one or several web fonts on the page "about". [Error 500]

  What is the solution?

  This is the temp on BusinessCatalyst site 4 Seasons Air Care.

  Thank you

  Melissa

  It worked:

  
  

  09:26 good response from Zak Williamson (Adobe) on November 4, 2015

  The original bug that triggered this error for many customers from mid-2015 to mid-September has been fixed by an update of CCLibraries, who was part of an update of the Creative Cloud Desktop application that went live in mid September 2015. Since that time, there are still some customers encounter this error. In these cases, the cause appears to be a mismatch in the State of the connection between Muse, Typekit, and Creative Cloud Desktop app.

  To correct this discrepancy, please follow these steps:

  (1) abandonment muse

  (2) go to the designer Cloud Desktop app and disconnection of preferences (it's in a menu of the gear icon).

  (3) leave the creative cloud office.

  (4) restart creative Cloud Desktop.

  (5) sign.

  (6) revive the Muse.

  At this point, you should be able to publish, upload, etc and your Typekit fonts should work without errors.

• Error: Could not generate code

  Hello world

  I'm trying to download files modified on a site - I have done so for months but now Muse continue to send this error and I can't download the last changes made to the file.

  Error:

  Could not generate code to activate one or several web fonts on the 'HOME' page [Error 500]

  Any advise?

  Thank you

  Restart your computer, or to kill the CCLibraries process (in on the Mac activity monitor or Windows Task Manager) and restart Muse.

• Could not generate code to activate one or several web fonts [Error 500].

  All of a sudden, my file of muse in trying to export to HTML, could not generate code to activate one or several web fonts on page... I worked on this site for days and had no problems with the fonts already. What happens when I try to export as HTML. I rebooted, changed my fonts, my fonts to the original font. It's apparent to help.

  Thank you!

  The original bug that triggered this error for many customers from mid-2015 to mid-September has been fixed by an update of CCLibraries, who was part of an update of the Creative Cloud Desktop application that went live in mid September 2015. Since that time, there are still some customers encounter this error. In these cases, the cause appears to be a mismatch in the State of the connection between Muse, Typekit, and Creative Cloud Desktop app.

  To correct this discrepancy, please follow these steps:

  (1) abandonment muse

  (2) go to the designer Cloud Desktop app and disconnection of preferences (it's in a menu of the gear icon).

  (3) leave the creative cloud office.

  (4) restart creative Cloud Desktop.

  (5) sign.

  (6) revive the Muse.

  At this point, you should be able to publish, upload, etc and your Typekit fonts should work without errors.

• messages in the form designer

  Hello world
  I want to know how the oracle deal with the message form designer and I wrote alerts
  
  time I wrote a message and it will appear in the status bar, and time he displays in front of me on the window
  
  of course, I still want to see the message in front of me, not in the status bar
  
  How can I achieve that?
  concerning

  Hello

  see the following link.

  A doubt about the alert Message...

  Sarah

• Forms design

  Hi all
  execuse me I want to know the difference between creating a form on several windows
  and
  design on more than a canvas on the same window
  guide me please
  Thank you

  Well you already have this:

  show_window ('window1');

  So, there is also:

  hide_window ('window1');

• How to run the form directly without having to open the form designer

  Hello Expert:
  
  Normally I run Oracle Form designer and print button.
  
  is there anyway that I can run it directly from IE without going into the Forms Designer.
  
  or I fom.fmx and compile the form already, is anyway to make it work directly without having to open the form designer.
  
  or even when to call form.fmx or compile the form from asp.net
  
  I use the Oracle 10 g Forms Designer.
  
  Thanks in advance.
  
  Published by: user11403781 on February 4, 2011 13:14

  You can run a form directly from a browser, assuming that the HTTP listener is running. In the case of Developer Suite, this would be OC4J. So, follow these steps:

  1 locate and open this file: ORACLE_HOME\install\portlist.ini

  2. take note of the value for ' * Oracle Developer Suite HTTP port. " It will probably be something like 8888 and 8889 or 8890 or something similar.

  3. start OC4J using the shortcut created during installation. It will be labeled something like "Start an OC4J Instance". This will open a DOS window. Do not close IT. Leave this session BACK will end the listener.

  4 once OC4J has initialized (you will see "... initialized" in the DOS window) open a browser and enter the following (replace you with host name and port requested in step 2 and form):

  http://YourHostname:port/forms/frmservlet?form=C:\myForms\helloworld.FMX

  If you are not able to get OC4J to initialize and remain running, attempts to run a form will fail. Also, if your machine is not registered DNS you can have problems using the host name in the URL. Instead use 'localhost' or '127.0.0.1 '. For example:

  http://127.0.0.1:8889/forms/frmservlet?form=test.FMX

• Want to make a "new user" form in Acrobat using the Forms Designer, I'm going about this wrong?

  Hi all, I work in a small company and would like to have a generic template that back to new users when they start. He practices the company base on internet usage, storage of base directory, login, etc... I want that last page of a form that I fill to contain their user name, password, telephone etc... I've implemented the shape makes a .pdf file and used the form designer to implement the fields I want to have active. Now I don't know what to do. I deally, I want save a copy of the file for each user in a network folder, with their information on this subject, and the form fields locked after I'm done. I've been playing with the distribution of forms and appear not to do what I want, looks like it creates a single file with all the different updates. I want possible, or can I just keep the shape of the United Nations distributed and open / save for each user and hope that they erase their data?

  Any help would be appreciated to gratly! Thank you!

  Yes, for what you want to do create the form in Acrobat is the best way to go. Here are a few tips.

  1. to flatten the page that contains the form field, use the flattenPages method. It is documented here: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.466.html

  So to flatten the last page of a document, you should do something like:

  Convert fields on the last page to the other content

  flattenPages ({start: numPages - 1});

  For more information, see the tool flatten Page content that you can download here: http://www.pdfscripting.com/public/65.cfm

  2. to save the changes in a new document, you can do this:

  Trigger the menu item save as

  app.execMenuItem ("SaveAs");

  It will require a location and a name of daughter. More information: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.143.html

  These two lines of code provide the minimum stripped for what you want.

  For the backup operation, you probably want to eventually create your own routine to SaveAs in a JavaScript file to the folder level which also contains the code that implements a custom toolbar button that implements this.

  For example (method addToolButton): http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.134.html

  and (trustPropagator for example of method w/save as): http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.168.html

  and (method trustedFunction): http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.167.html

  Create your own routine to SaveAs to silently save the file to the desired location by using a file name based on the content of one or more form fields, for example.

• Is it possible to change the generated code?

  When you add an image to a page in Dreamweaver, you select first image of the chosen file dialog box, then the code comes out like this:

  

  However, I will be implimenting a lot of Facebook to a site and they need rel = 'image_src' in the image tag. Is there a way to Dreamweaver where I can change the default generated code when inserting an image to understand that? The idea to add it each time I add a picture to a page (and there are many of them) makes me cringe.

  988hfas9fhaf8 wrote:

  I will be implimenting a lot of Facebook to a site and they need rel = 'image_src' in the image tag. Is there a way to Dreamweaver where I can change the default generated code when inserting an image to understand that?

  If you want to each image you insert, you can change Image.js in the folder Configuration of Dreamweaver. On Windows 7, it is located in C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS5\configuration\Objects\Common. On Mac OS X, it will be in a similar situation in the Applications folder.

  Find the following lines (45-49 in Dreamweaver CS5):

  if (imgDim){
    rtnStr= '';
  }else{
    rtnStr= '';
  }
  

  Change them like this:

  if (imgDim){
    rtnStr= '';
  }else{
    rtnStr= '';
  }
  

• Opening Acrobat 8 on a Windows Form

  This is the first time I used the Acrobat SDK kit, so I apologize if it's pretty simple.

  I try to open a PDF file in Acrobat 8 Professional on a Windows form (it will be on a tab in a tab control). I need allow the user (who installed the full version) to have a complete annotation features. I can get the code to open the PDF in Acrobat, but it opens separate from my program.

  Can someone point me to what Visual Studio tool, I would like to use for this? I'm using c# and VS 2008.

  Thank you.

  In the examples included in the SDK, see the example for BasicIacOCXCS.  This shows you how to incorporate Acrobat control in your application in c# WinForm.