Newly loaded XP update

Similar Questions

• Can not go to the past "connecting to update server" when you try to load an update 'highly recommended '.

  I have a Dell Inspiron 6000, running on Windows XP. I get a Firefox pop-up saying "It is strongly recommended that you load this update".

  Whenever I try to do, he refuses to go beyond the area of progress that says "Connecting to the update server". I left at this point, he much more 30 minutes once, but nothing helped.

  I tried both via my Belkin router and directly on the ethernet cable.

  The broadband connection is one of the O2 Exchange low speed.

  What could be the problem?

  If you have problems with the update, then easier is to download the full version and uninstall the currently installed version.
  
  You may need to remove the Firefox program folder to do a clean install of the new version.

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not remove the data of a personal nature if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Im trying to load the update of Mac OS x Server combined software and it says that my disk volume does not meet the requirements of the software

  Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?

  You are running a Mac OS X Server software? If so, which version?

• can't stop/restart to load the update

  Since the upgrade to El Capitan 10.11.1.  Impossible to make a stop down or restart to load the new updates. Force quit does not load the update

  any help would be great

  MacBook Pro (retina, mid-2012)

  2.3 GHz Intel Core i7 processor

  8 GB 1600 MHz DDR3 memory

  see you soon

  Rick

  I don't quite grok what you say.

  You can force stop the machine in now the power button for a period extended, say 10 sec or so to force a shutdown.

• You can load the update of windows on the computer and then one more

  You can load the update of windows on the computer and then one more

  You can load Windows * updates on multiple computers. Should not be confused with * updates *. TaurArian [MVP] 2005-2010 - Update Services

• iPhone 6 won't load after update 9.3. Can't turn on despite the wall load.

  Update iPhone 6 to 9.3 two weeks ago. More later arrested ten days of load. Does not load. Cannot update 9.3.1 because the phone does not illuminate. Please notify. I tried recovery tent. But no power, therefore cannot be updated. Wall charged through the cable and charger OEM.

  If you have already tried troubleshooting mentioned in this article, and still not load or lights, you will need to check out by Apple or an Apple authorized service provider.

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

  Apple iPhone - contact Support - support

  Find an Apple authorized service provider

• IPad 2 Air battery drained and does not load after update 9.3

  Air iPad 2 (Wifi + cell) battery has completely evacuated and no charge since after update 9.3. Update my device was 100% of the fees. Subsequently, when the update was finished, the Unit continued to lose the load during use (I got the full enjoyment on the charge) and does not charge even on not trying to load intermittently and for long periods. Once the load is complete evacuated after considerable use, I was unable to see the unit after 2-3% fees.

  I have restored and updated the device via iTunes, but the problem persists, and I see a battery on the scree with 3 red lines. When I take off the charge cable, I get a black screen with battery 3 red lines and a chart of the charging cable.

  I had once the apple logo and the ipad started and I had the interface momentarily, but he lost.

  I have been struggling with this for the last 4 days and have tried almost every single suggestion there. Connection to the support of people was not possible on the web. And I am currently in another country where he sold the IPad to be able to switch the device back to the Apple Store to have checked out it during the warranty.

  Any suggestions are welcome. TIA.

  Well, I had the camera to load up to 61% where it is blocked again.

  Here's what I did that I had not done earlier out of the many resolutions that I tried from that provided in the forums and on the internet-

  I put the IPad for a couple of hours in his keyboard case and then all located in a thin cloth and put it on charge, ostensibly to warm a little battery. The warm-up was suggested in another thread, where a person even went to the extreme of using a fan hair dryer to warm the device. After a few hours, he did to load up to 60%, I got it out to check if it worked.

  Maybe I shouldn't have checked and waited a little longer, because the IPad is now stuck at 59 to 61% for the last 14 hours for free. I still struggle to go beyond this percentage, but at least I can use the device. Is there something I can do now to improve the percentage of charge? I tried the resets and even restored and updated the iOS through iTunes.

  Hope the above helps someone.

• Do not load, stop, "update needed"

  Hello

  My MBP early 2011 has been acting for the past two days. He started does not load, the LED does not illuminate, and the computer would not recognize to be plugged. Then he started closing in the medium used. He did twice in the last hour. When it restarts I get the attached image "update needed" on my login screen. I tried to do an SMC update addressing battery problems, but that did not work. I am located outside of the country for the next days 50 so all advice that could save my computer until I can get to the Genius Bar would be much appreciated.

  Thanks for any help!

  

  You have the early installation of Snow Leopard original supplied with your 2011 MBP diskettes?

  What is the current OS x you have installed?

  Ciao.

• Games slow to load after update graphics card.

  I have a Compaq presario sr5123wm. Running Vista service pack 2. Had trouble with him, stopping or freezing while playing games or or using the internet, it seened to do more if I tried to do more than one thing at a time. So I changed the graphics card Radeon HD 4550 and the power of 400 watts. I have also cleaned the inside, ran Norton scans and down the updates. This seemed to fix the lock ups. Now when I try to load the sims 2 it no longer responds and when I try to play world of Warcraft it loads very slowly. any suggestions?

  When you put you bump the memory to 4 GB?

  Best regards
  ERICO

• How will I know what security pack I have in my computer? and do I have to load the update of security in ms10-046

  I have recivied an email indicating that I need to load a security update. He referenced MS10-046 "a vulnerability in the windows shell could allow remote access" is this necessary? and it refers to the sp2. Which leads to my next question how can I know what "SP" I have on my computer. Thanks for your time and considerartion.

  go to start > run > type

  winver

  Click ok

  What service pack t - he say that contains?

• Using W7 X 64 Ult I try to load KB976422 update and getting error 80070005. __

  Using W7 X 64 Ult I try to load the KB976422 update and get error 80070005.
  It dowloads OK, but when the machine charging the update fails and the system comes back and restarts.
  I understand that this update is for large flash cards, (which I did not), but it is still very irritating not to have a clean sheet on the history of the update and do not forget that it ever works.

  I looked in all the likely places, but can't seem to find this combination. I missed the answer somehow?

  DAve

  Dave

  80070005 is an access denied error. This error occurred never install any other updates? The update in question, KB976422, update drivers 4. Most likely, location of the drivers is 'protected' against driver changes or their registry setting is. Suggest that you manually download the update and save: Update for Windows 7 for x 64-based systems (KB976422)

  Configure the system to boot: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Try to install KB976422 now. If you are prompted to restart.  Who are you installed?

  MowGreen Services update - consumer safety

• Windows Update page does not load, another updater with "update" in the url does not work, and the microsoft Download Center will not download. Help!

  Right. I read the other posts and do not know if it's the same or not, but...

  Update Windows page fails to load - no error message
  antivirus and another updater with update in the URL cannot purely and simply, or don't load - no error message
  any attempt to download anything from microsoft download site fails to load - no error message

  I got stardock, not my colors, uninstalled

  same result.

  any ideas?

  CLM-NSWG4,
  It seems to me that you can have to deal with a virus\malware infection.  You can watch these threads discuss virus problems and see if you are able to detect problems, that I suggest you use an online scanner (if you are able to) and scan your system.

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Windows Live OneCare Safety Scanner Windows XP

  Get rid of malware

  Can I clean an already infected computer?

  If you need more help then read: what to post in the Windows Update forum
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion 15 laptop (15-p264: cannot install Windows 8.1 (W8.1 pre-loaded) regular updates)

  I bought a new laptop HP Pavilion 15 (product number: LOE38EA #ABU) a few months as a backup to my desktop PC.  It works fine except that it won't install the usual Windows 8.1 updates (Windows 8.1 has been pre-loaded).

  It downloads OK but when I restart it installation I get the message 'fail updated widows configuration', and he comes back the changes.

  I thought that it might be due to the fact that I loaded a few old Windows XP software (which will actually OK) and so I uninstalled everything, but that didn't solve the problem.

  The only other thing I've done is to replace the protection installed with Norton antivirus software that I use on my desktop.

  The list of the 'updates' that I can not install works now at 31.

  Any ideas?

  Thank you

  Hello

  Please try one or two on the list. If ok, split the list to a few lots, do not combine them into one time.

  Kind regards.

• I have XP I have down loaded the update for Kodak printer 5300 now will not work. It is said to use advance dot placement mode size of paper by a select line

  I down loaded the 5300 Kodak down load nd now the printer works well not. It is said, to use advanced point positioning mode select a paper size by a line and the paper tray

  Hello Forrestar,

  Thank you for your message.  We will try to remove the software that you have installed, and then reinstall the latest version of the software for your device.  Did this update also includes a new driver?  If so, you could try to restore your driver to the previous version.  Please let us know so that we can help you more to get this problem is resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not load after update

  I just installed windows vista on my calculation, after that I return it. I had to reinstall windows and every time I do the windows update it restarts and when it turns back all that I get is a black screen with nothing load on this subject?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner