News Digital connector 50 pins

Similar Questions

• Where can I find list of pins for connectors 68 pins on the SMU-8430/8 and the SMU-8431/8

  We need to build new cables for the SMU-8430/8 and 8431/8 interface cards series.

  I can't find pinout information or other connectors 68-pin on the front of these cards.

  Can someone point me in the right direction to find this information.  Thank you.

  The design of the system requires new cables we don't need a list of the pins.

  After a few more watching on the web site of NOR, I found the information I need here:

  http://digital.NI.com/manuals.nsf/WebSearch/F5A76AD1B0C3B1FE86257B59006A9EAD

  Thanks for the reply.

• The upgrade GPU and PSU for Optiplex 9020, baffled by connector 8 pins. !!!

  Hi, I have a game related question if you want.

  I recently acquired a brand new 9020, was surprised by the performance and was eagerly expected put in my old Redeon HD 5770. However, I was faced with the question of the connectors on the motherbioard is unfamiliar and non-standard. My old SPU 650w had a 4 pins of connector 8 pin, just like your stupid mothers, but they don't reach. The expected 20 "-24"-pin connectors were nowhere to be seen, so I couldn't use these either. " I just talk about an oversight and that my diet Huntkey Titan 650 has simply need an extension lead to join the mother socket, or I'm screwed? The PC was bought for me by my University, and I didn't have the choice of the plug.

  Best

  Fulmar

  Dell isn't the only one to do that.  HP also does.  Its likely a response to the power supplies being exchanged with units of counterfeits.

  The adapter looks interesting.

  http://www.moddiy.com/products/Dell-OptiPlex-3020-PSU-main-power-24%252dPin-to-8%252dPin-adapter-cable-%2830cm%29.html

  Dell OptiPlex 3020 main PSU to power 24 pin to 8 pin adapter cable.

  Suitable for Dell OptiPlex 3020 / 7020 / 9020 / T1700

  Seems to be using the gray PWR, 3 son of black earth, Green power supply wire, 2-wire 12V of the axis to 24 and 1 wire to a molex power connection 12v.

  This means I can hack me a plant power supply using the power cable original and some tubing and solder.

  

  

  

• XFX Radeon 7850 in an XPS 8500 - issue on the connectors 6 pin

  I want to install a Radeon XFX 7850 in a Dell XPS 8500.  I have a question for the two 6-pin connectors.  I need two 6 connectors for this card.  I have two connectors six pins - but both seem to be on the same cable.  Is this right?  I think it is, but I wanted to make sure.  My previous XPS systems have connectors 6 pins on the different power cables... I guess they changed the wiring on these new systems...

  

  Hi oogieboogie_321,

  Yes, you can connect the 6 pins on the card connectors even if they are of the same cable.

• Can I watch the sky go app on my TV by connecting my I pad2 using the AV adapter digital Apple 30-pin

  Can I watch the sky go app on my ipad 2 via my hd tv by connecting iPad to my tv via digital of 30 pins of Apple

  AV adapter?

  Apple says you can show what on your screen. (?)

  http://www.Apple.com/shop/product/MD098AM/A/Apple-Digital-AV-adapter

  did you read the comments?

• New digital camera will not work on this computer

  I bought a new digital camera, but it won't work on this computer, it claims to be compatible, help!

  Sorry, but I think that no one will be able to help you without more details.

  Check the manual of the user of this camera! Go through all the points.

  Check if the driver is not required and could be updated!

  At the moment that's all I can say!

• Power connector 4-pin S5-1110 or adapter?

  I need to put a USB 3.0 in my Slimline for use with external hard drives. The cards I've seen require power connectors 4 pins old style.  The Slimline is very compact and it is difficult to see where I could put a splitter or a connector.

  Any suggestions on the source of the appropriate connector and where it plugs into the Slimline?

  Hello

  Are you sure that the PSU in the slimline is big enough to handle the USB 3.0 card?

  You could look for a cable Y SATA then a SATA Adapter 4.  Here are a few examples so do some measuring to ensure that the length according to your needs.

• I have created a new digital signature for my boss

  Hi all

  I have created a new digital signature for my boss and then I went through the process and create a password and repeated and then I clicked on finish but then when I try to sign a document, it says that my password is incorrect which I know it is good.

  Any help please.

  Kirk

  Hi kirka75318474,

  Please perform the steps given in this link: Re: I don't know any password for the digital signature or the different menu options to remove the same. I need a new digital signature file, or the possibility of placing my signature on a document, as I did years.

  Let us know if you face any problem.

  Thank you!

  Shivam

• Create a new digital ID - passwords do not match

  When you create a new digital ID in Adobe Acrobat X on the Windows 7 computer, after you enter the new file name where the ID should be stored and password, I get a message box: "passwords do not match '.

  I gathered the following information about the creation of digital IDs in Acrobat:

  Acrobat help who says: "Please enter a password for the digital ID file. For each sequence of keys, password meter evaluates your password and tells you the strength of password using color patterns. Reconfirm your password".

  A post on the forum who says: "6. now enter the password in two places by following the instructions."

  I also watched a video how the person has been inserted the password when you create a new digital ID, she had two text boxes to enter. Screenshot of the video is here:

  

  But when I try to do the same thing, I have only a single field to enter the password. Here is a screenshot of my computer after clicking "Finish":

  

  Does anyone know how to make the second password field displayed, so I can confirm and get rid of the message "password do not match", and finally to create the digital ID?

  I just had the same problem, I am using Acrobat X Pro.  I found this post and how the form is supposed to watch so much when I had typed my password in the "password:" box, I pressed Tab and the slider disappeared, I then re-typed my password, assuming that he had gone to the "Confirm password:" box which is not visible and then press Finish.  It worked for me and I was able to create a digital ID. Might work for you too.  Good luck.

• theres no digital 8 digit PIN them on my linksys router. Is there a way to turn it?

  Hi, I want to protect my computer by setting up a new connection or network. I thought I'd finally to succeed in a computer task... no luck. I am required to type a digital PIN number 8 digits non-existent. Someone at - it ideas?

  It should be under the router

  Or go to the options of configuration / http://192.168.1.1/ there
  Do not fill in the username and type admin password
  If it does not give the model of complete router

• I pinned tabs but they don't open when I open a new window? Permenantly pinned tabs that open when you open the browser is something that is so simple and usefu

  It should not necessarily be a "pin", but I wonder how to keep one eye permanently there everytime I open a new browser, as they appear.

  Pinned tabs are related to a specific window and you can have a different game in each window.
  You have to re-create the tabs pinned, if you want in a new window, possibly by the bookmarks in a folder (to bookmark all tabs) or set them as many home pages (a new window opens with the home pages).
  Maybe there is an extension that allows to open newly opened tabs pinned in windows, so you can search the Addons site.

• NVIDIA Quadro: I plug 6-pin power adapter or connector 8 pin?

  I am trying to install my graphics card Nvidia Quadro 6000 on a HP Z820 with a PSU 1125W

  The Quadro card: 1x8pin auxiliary power connector and power connector auxiliary 1x6pin.

  My questions are

  1. in the connection of my power adapter, do I plug the unit into the 8 pin or 6 PIN auxiliary connector?

  2. where can I connect the other end of the power adapter?

  3. the power adapter must be a HP one or can I use any brand.

  4, if it's HP, what is the part number

  I would appreciate help on this.

  Vinny

  Edit: Here is this link related to this issue.  It goes also to other topics with excellent similar information:

  http://www.TomsHardware.com/reviews/power-supply-specifications-ATX-reference, 3061 - 12.html

  First, it is important to know that there is another interface "6 to 8 pins" which is a feature of power-for - motherboard power ... you don't want that, sure, and connectors plastic is having different shapes.  You can see that he has 4 yellow wires (usually the supply wires) and would not have the sequence of correct wiring of a PCIe 6 to 8 pins supplementary power converter:

  

  I don't know the show, too, is not what you want.  This looks like an 8 pin to two adapter 6 pins.  You want a 6-pin to 8 pin adapter.  Is attached another picture of the nVidia type tells you to do.  If you look at the hyperlink at the top of this post you will find the wiring of 6 pins on 8 wire and for your project, you will probably want to follow the advice of nVidia for best results.  There is power to the ground and 'sense' son to all be correctly connected to the adapter.

  There is also some PCIe additional adapters that allow you to convert several sheets supply 4 son "molex" grouping in a single 6-pin PCIe or connector 8.  It is best to not do this if you have a power with official ones built in.  Your the fact, and to check the manual, it looks like your top rated power supply has 3 of these auxiliary PCIe power cords (G1, G2 and G3 will be printed on the side of the end of your 3 card).  On the other hand, offer reduced rated power of the Z820 has only 2 additional PCIe (auxiliary) cords supplied by it.

  I don't know if you are forced to use a good 6-8 converter or could if away with plug 6 pin right in the correct position on the plug 8 pins of your videocard directly, according to article of the hyperlink.  I, personally, would get an adapter.

  EDIT: Here is a picture of two ends of what is supposed to be a PCIe 6-pin supplementary power adapter PCIe 8 pins.  The first and third power pins 6 pins are officially DC 12v (some references have each of the first 3 pins being 12vDC) and subsequently, the rest are supposed to be a 'sense' or earthed.  When I look at the plug 8-pole end wiring I do not see a ground wire or ground jumper coming to pin 8.  I would not recommend it, unless I'm wrong about his son:

  

• Power supply for battery connectors Hirose pin configuration plate

  I'm doing / buy a lead that will fit a Sound Devices * my camera F5 240i. F5 battery adapter plate has two connectors Hirose on it with 12v 1. 8A on each. It would be wise for me to the * camera. You know the power the PIN Configuration for the Hirose connectors on the power plate? Thank you

  
  

• Programming of the digital I/o pins on the NOR myRIO-9100 for serial communication

  I use NEITHER myRIO for my robot and I want to use four reading of the distance sensors that communicate via the serial port. But the myRIO has only two UART ports on board so I was wondering if there is a way to program the digital pins use for serial communication. Any help appreciated.

  It is possible.  Here is an example that I could find.

  Example of reference to RS-232 for LabVIEW FPGA Interface

• Problem of connector 4-pin Corsair 600 CX-600 PS and P7-1137. Help, please!

  The forum recommended that I get a block of power supply Corsair CX - 500 or CX-600 ay P7 - 1137c PC (to upgrade the video card).

  I got a Corsair CX-600, but I noticed he didn't have a 4 pin power to connect a connector with 4 pins on the motherboard (labeled ATX CPU).

  What should I do? Y at - it an adapter that I'm supposed to do?  Help, please!

  I assume you found that the connector is a 4 + 4 split

  1 x main connector (20 + 4 pins)
  1 x 4 +4-pin ATX 12V
  1 x EPS 12V
  2 x PCI-E
  6 x SATA
  4 x peripheral
  1 x floppy