NEX-7 Time Lapse

Similar Questions

• Alpha A6000 time-lapse

  I have an A6000 and a NEX 5R.
  On the 5R when I put the Time lapse mode custom application
  of a sudden and I have some follow-up on the exhibition.
  But on the A6000 with the same application in custom mode, I can't following exposure at work.
  The subject I need to pull has change the lighting conditions that I can't control.
  So I need the camera to adjust.
  How you do this with the A6000?. Is the useful AEL button here. ?
  During a few hours, the light changes so that I may need to manually set the ISO using TimeLapse (200 at 1600ISO). Is it possible to set the camera to do? And how could it be implemented?

  The Low, Med and options high tracking sensitivity sets the speed at which exposure adopts exposure based on the variation of brightness. The faster the sensitivity of tracking, smooth the transition will be as the exposure of the scene changes.

  If my post answered your question, please mark it as "accept as a Solution.

• I can slow down a video in Time lapse

  I can slow down a video in Time lapse

  Is this related to iPhoto for Mac somehow? What is the source of the video? How are you viewing?

• Time lapse setting

  While endearing taped sister memorial service, I had accidentally camera set time-lapse which resulted in a very quick video.  Is there anyway I can it slow down at normal speed?

  Sorry friend...

• How to slow the time-lapse video I took?

  Accidentally, I recorded a video using Time lapse video functionality.  How can I slow down the video to view it?

  In addition, he did not record sound when it is in Time lapse mode?

  You do not have. Time is quick, so time happens or is struck by decay more quickly. This audio is not recorded, and it would be completely incomprehensible at the expiration of the speeds.

  Time lapse ignores also usually several frames to expedite the passage of time. So even if slow, most of the data wouldn't be there to see.

• Time lapse with the Camileo P10 or Camileo Pro HD

  Hello

  I have two of these cameras and I understand this time photography is possible with them? I've certainly seen some footage on youtube that are supposed to be done with the P10.

  I've been through the menu on both and I don't see how it's done! Anyone able to help please?

  I had to google for + time lapse photography + because I didn't know what it is.
  Now I m a little bit underhand ;)

  I guess that both don t camcorders are supported by this feature I also checked the user manual but could not find any details about it.

• How to do a Time lapse with Playmemories Home video?

  I have a Sony HDR-AS30v camera and used to create movies of the time. However, the camera itself does not record the Time lapse as a movie but rather as JPEG files. I guess playmemories House would have the functionality to keep these different JPEG files and provide the tools to do a Time lapse video, but I'm yet to find it. In the meantime, I use Studio of GoPro, who did an impressive job of creating Time lapse, I really think it's funny but the Sony has a camera, which has the particularity of Time lapse, it does not save as a movie and does not provide a tool to make a film.

  Check with the community, if I do it all just bad and there is infact a way to make Time lapse with PlayMemories home movies.

  So far, thanks GoPro and their awesome tool, without it I'd be stuck.

  I also tried Microsoft Movie Maker, however found that after 1500 JPEGs, it crashes.

  It is true that the software PlayMemories home (WPH) doesn't have the ability to compile the pictures taken in a movie. We appreciate that you take the time to provide this feedback, and we will pass to our engineers for review.

• I tried to make a Time lapse video, but I can not choos "adobe media encoder" how to fix this?

  I tried to make a video for a time-lapse, but I couldn't choose "adobe media encoder", how can we solve this problem, I tried to download from Adobe but he coulded be installed.

  CS6, CC of Photoshop, Photoshop CC 2014 and 2015 CC Photoshop have a subset of the Adobe Media Encoder.  You should be able to make a video action your Timeline video and image Animation timeline.  Here I show an Animation of image exported in the form of video using a predefined Adobe Media Encoder which is part of Photoshop.

  

• Where can I get a Time lapse plug-in for Lightroom?

  I need a plug-in time lapse to complete my animation of downtown Kansas City.

  Hi Josh,.

  Please check out the following links and let me know if they help:

  LRB Timelapse Presets/patterns - lrbplugins.com

  LRTimelapse - download

  Kind regards

  Tanuj

• When I try to do a time lapse in lightroom, that it cut the end of the video

  In Lightroom 5, (it came with Photoshop Creative cloud), I download a series of pictures, edit them together, then select slide show and a model Bowers - model of the user - Time lapse 23.97fps, download, .zip https://www.youtube.com/redirect?q=http%3A%2F%2Flightroom-blog.com%2Fpresets%2Flrtimelapse & redir_token = U79NuJdMuv4axu4RigPjzH5hxpd8MTQxNzI1NjExM0AxNDE3MTY5NzEz

  I then export the video, she treats as usual. BUT when I look at this return is missing at the end of the clip. I am a student level and that I should use for my course, please help.

  Alex O'Sullivan

  So to be safe, you know what I mean, take your Lightroom changes. Export to a folder of numbered sRGB in sequence of JPEGs of reasonable size (say 3840 pixels on the long side, so you can make a 4K video) and implemented the project as in the linked video in front. You can now make a simple time-lapse direct or throw in a pan and zoom in the editing Photoshop Panel, add a title caption, bland, etc. Here is an example of a Time lapse I created in this way: Jao photo blog: The Polar Vortex - Star Wings

• How to create a time-lapse with Premiere Elements?

  To the right,.

  I have a digital SLR (Rebel T3i) and I intend to take pictures from time to time. I heard there was a way to do in Premiere Elements and would rather save the money since I already have this great software. I would like to have the steps to do so as soon as possible.

  Sincerely,

  Adobe Pat 206

  Adobe Pat 206

  Many more details, but to start, check out my blog on the basics of the first elements Time Lapse.

  http://www.atr935.blogspot.com/2013/07/PE-time-lapse-video-basics.html

  Later.

  RTA

• Time-lapse on PE11 - how to?

  Just bought (a steal at GBP11-79 equivalent USD 16-70) a Neewer timer remote control Rs-60E3 for Canon 550 d / T2I specifically to start photography of time, another new start for me.

  I would like to know if there is an article on the Discussion Forum on how to treat separate pictures to get a good effect.   Harrington on one of its sites has a few videos on getting real photos (and I don't know that he is right to insist on their shooting in RAW format and treatment in ACR before making the video).

  Steve has a section on the creation of a slide show in the menu Organizer (and also earlier in the book in the active project, I believe) but I have not yet tried it, and I couldn't see (although I only looked through it quickly) something specific on what makes time.

  For a time effect, you import, say, a couple of hundred files, make a slideshow, simply use the tender time to speed up the final product?

  No doubt the length by default in imported seconds still photos also has to be re-defined, for example, 1 second, 2 seconds?  (If this is the case, would be a so there is no need to change with the Time Stretch?)

  I looked at the Muvipix site, but could not immediately see the time, and I have not yet found anything on Harrington on transforming the RAW files in the timelapse video (also it is not dealing specifically with PE).

  Thanks in advance for any guidance on this.

  BTW, the customer examines all say the timer Neewer (as above) is as good as more expensive Canon, the equivalent but they all lament the fact that there is no power switch although most adds that it is a simple matter of the batteries after each use.

  Part of my interest in the time, apart from the inherent fascination of the thing, must deal with the problems of making videos in very low light or at night.

  Brian

  Brian,

  I use the method of Steve, for both time-lapse and Stop-Motion project - similar, but with some differences.

  I have one of my utilities, such as Adobe Bridge (sort of Organizer similar, but with more power and available only with Adobe, such as PS programs, PrE, I, AE, etc.), NaMo (older, free utility file naming), ThumbsPlus (commercial file Organizer) or SuperExplorer (a replacement of Windows Explorer with more power for some things), allows you to rename my files usually a sequentially numbered, say [Clouds_00001.jpg, through Clouds_00099].

  That you set depends on the look you want. I did some, where I wanted to only 1 Frame, by Image, but also made a few, where perhaps dry. 01 (25 fps PAL-Land) gave me the 'look' I was looking for.

  If you go with a short time, then you will probably have to add chained Cross-fades between Images, and to do this, you can set the duration of the fade way down, to the right, to the 1 x 1/2, the duration of the Images. If I were to decide that 25 images (01 s duration) was perfect, then I would put the length of the crossfade about o1 dry too.

  To determine the 'look', what you want, I do a test with only a few Images and experiment with their length, the longer the cross-dissolves, until I had it just as I wanted - then delete the timeline and import these Images, placing them on the timeline.

  Good luck

  Hunt

• Time lapse help working with xdcam ex workflow

  Hi all

  I have a sony ex3 and working with xdcam ex codec - I have a time-lapse sequence of JPEG images that are long 22 seconds

  When I'm trying to make it in 1920 x 1080 @ 25 fps using several methods and formats I keep ending up with 3 GB file sizes and more

  / 3 gb is crazy for a clip of 22sec

  Those someone has suggestions on the correct setting to use when rendering the above sequence

  I'm using cs5

  Thank you and best regards

  P.

  Ireland

  / 3GB is not crazy at all for 22 seconds of uncompressed HD video.

  Depending on what you want to do with the film long term, you can return on an intermediate rendering without loss (something like a Quicktime movie using the PNG compression) and then compress this film using Adobe Media Encoder (or a similar compression tool) in a format of delivery more suited to your file size concerns (i.e. 2-pass VBR h.264 encoding with flow). If you do not have the storage, then you can always ditch the not compressed / lossless compressed after that you have your final product. The reason for which you would like the middle stage is then you can get the best possible compression. XDCAM (whatever flavor you're using) is a highly compressed codec and limiting the acquisition. You don't want to go to him, most likely.

  So, the question is, what will you do with your final product? Web site?

• Time lapse HD camcorder effect video cs4 mac

  G'morning all,

  I'm a middle camcorder HD price with lens wide angle 25/30 optical zoom 60 p and flash drive, I would also like to be able to create effects of time.

  Time lapse is not (as far as I found it) a part of the foregoing to this package, I looked at p/pro cs4 and they have no script. Now, just to divert a moment. One of my friends at P/S C Pfaffenbichler has managed to create a script realized that cases, I'm able to intermingle replacing executives of two separate video (it's a 3D thing if someone needs me know that it's a collar of script).

  Welcome back to the starting point, "is there a way to create a script that will either;

  (a) have the ability to leave say that is every 20/30/40 image etc and save them as a separate vid?

  (b) have the opportunity to go through a video and remove predefined image blocks and leave an image, remove blocks predefined frames, and let a framework etc.etc

  (c) knows different programs that can accomplish this time of mounting effect of vid.

  Looking forward to your opinions

  All the best

  Gary

  He'll jump 14 images for each image of the model.

  So at frame 0 images will display 0 * 15 frame which is 0.

  1 frame images poster frame 1 * 15, frame 15.

  The Framework 2, 2 * 15 gives you frame 30

  and so on...

  Edit:

  There will not be any spacing or blank frames between images. Just the sequence 0, 15, 30, 45, 60...

  Post edited by: myrslok

• Question of the NEX Time Lapse app with fashion bed and the rising of the Sun.

  NOTE: this problem was first mentioned by me in the other thread about the app of time works do not (a thread "solved").  Wanted to separate this issue in its own thread so I hope this is seen and worked on...

  NEW PROBLEM?  I starts with the NEX - 5R regular automatic mode 'Greens', start the application of time and run in mode 'Sunrise' .  I then begin firing sequence before the sun rises.  It takes about 40mins (I use all the parameters of "sunrise" by default) and when I check the results I see that the exhibition was "locked-in" with the first shot taken.  That means the video created in the device starts properly exposed, gets brighter as the Sun starts to come will then completely saturated white until I see clouds of beautiful Sunrise 'red '!

  What is the way in which the mode of "Sunrise" is supposed to work?  I'm doing something wrong?  I think that with the changes in the brightness of the scene, the camera would be re-meter each image taken on not to bleed the scene as the sun rises.

  Everyone knows this too?

  Moderator: you can report?  (BTW: the Sunset function does the opposite for me also: scene will just completely black too fast as the sun sets.)

  Thank you

  Mike

  At the time of writing, we have no information if there is an update for this application. We can refer to this post and try the steps to see if this will fix the problem.

  If this post answered your question, please mark "accept as a Solution.