NI GPIB - HS USB ready or will serve?

Similar Questions

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• Aspire ax1800. It is better to add a wireless card or a usb wireless adapter will be sufficient

  Aspire ax1800 doesn't have a wireless card.  It is better to add a wireless card or a usb wireless adapter will be sufficient?

  Hello

  Here's the original Council/dongles Wireless:

• Media Player says ready but will not play

  When you try to view a demonstration of Access 2007, the video says ready but will not play. When I click on play it flashes media connection and does nothing.  I updated java installed windows and installed the codec do not know what else to do?

  Hello

  1. you try to view the video online?

  2. what browser do you use?

  3. What is the format of the video file?

  If you try to view the video online, so I suggest you to follow the steps in this link and check if it helps:
  http://support.Microsoft.com/kb/2532294

  Otherwise, provide us with more information about the issue, so that we can better help you.

  It will be useful.

• How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  * Original title: Windows 7 - CD to USB

  I bought Windows 7 (the two CD 32 & 64) many years for use on my early 2008 MacBook Pro, with an optical drive, via BootCamp. It worked very well.

  Now I have a new MacBook Pro without optical drive, but would like to install BootCamp and use Windows again.

  How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  Thanks in advance for your help.

  Use Rufus:

  Rufus - create USB bootable the easy way discs

  Another solution:

  http://www.AddictiveTips.com/Windows-tips/create-bootable-Windows-7-USB-flash-drive-from-DVD-disc/

• LaserJet 6 L shows ready but will not print from computer

  My LaserJet 6 L works fine, but just today he's leaving the impression.  Green ready light is lit, but sign says 'paper.'  There is paper in and it will print the test page for each slot.  Cannot print spreadsheet, word processing, or WordPad, PC running Windows XP.  A second printer (HP Deskjet 4215) prints fine - USB connection.  How to test to see if my printer cable does not?

  Solved by my computer shutdown and restart.

• GPIB to USB cable

  Hello

  I was wondering if GPIB NOR to ACR USB cable be used to control the instruments of Agilent. I tried 3 different instruments of Agilent and it doesn't work. The cable works for all the other instruments that we have.

  Thanks for your help

  The GPIB-USB controller can be used with any instrument that is consistent 488.1 and 488.2.

  You need to explain "it doesn't work" with details such as the model of the instrument, the error codes, etc.

• A usb game controller will work on a HP ENVY with the game of the GE FORCE

  I have a new Hp Envy with the GE Force games installed. I want to use a standard usb game controller similar in its design to the Xbox or Playstaion versions. Will be a generic controller is compatible with the GE Force games?

  Sure.

  Just ensure that there pilots for the version of Windows that you plan to use.

  Take a read of this article examines the game controllers

  http://Lifehacker.com/five-best-PC-gamepads-1311100546

• Creating a USB boot disk will affect my HARD drive

  OK so I have Windows Vista and I did a Windows 7 boot disk on my USB key and before I booted from it, I want to know if he's going to do a clean install / affect the Windows Vista on my HARD drive or will only affect the USB key.

  You can install Windows 7 from a USB /Thumb drive, but Windows 7 can not boot from a USB key.

  You try to install Windows 7?

  J W Stuart: http://www.pagestart.com

• external usb card reader will not read anything beyond 2 GB cards

  my computer is running Vista Edition home premium 64-bit.  When I plug my digital concept 51-in-1 play/recorder card the computer will recognize, if I put in my mic of 1 or 2 GB sd he sees.  But if I insert anything bigger that that the computer sees the card, it does nothing.  So I don't know the card reader works.  I have another computer running the same OS but 32 bits and I have no problem at all.  Could there be a problem with the 64 bit?  Please help... very irritating!

  What is the EXACT make and model of drive?  It is Digital Concepts CR - 75 USB 51-in-1 Card Reader/Writer (if not, why)? So no matter where you had drivers, firmware or software for this devicce or did you just plug it and expect it to work with anything else required (which may indeed be the case, but I suspect not - I just want to know if you have anything to make it more compatible with the system).  Where did you get these files and where is the technical support (web site help - is it Sakar, http://www.sakar.com/contactus.aspx?)  If so, consult the following site:http://www.bestpriceaudiovideo.com/digital-concepts-cr-75-usb-51-in-1-card-reader-writer/.  You'll notice that it includes Vista as OS compatible.  Yes, I know, is to find work on the other Vista machine and it works even partially on this one - but he may still have some problems. "

  I would contact Sakar support http://www.sakar.com/contactus.aspx and discss the issue with them.  They have a simple solution, or they can tell you that you need to install some additional things (and I hope that tell you where to get them) or they can say that there is a problem with Vista 64-bit.  In any case, they know better than we do, and since you are 'install' as plug-and-play, then the issue is not Vista but the device and/or drivers, firmware, or software required for the unit (even if this wan't necessary in Vista 32-bit computer) of the product.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• External DELL GP60N USB DVDRW drive will not play DVD

  Hello

  I have a new Dell Inspiron 3531 with Windows 8.1.  The laptop came with an internal DVD/CD drive, so I bought a Dell GP60N external USB DVD - RW Drive.

  When I put a DVD in the drive that the laptop recognizes it is there, but will not play regardless of how I set the automatic run settings.

  I also searched drivers see if mine was outdated, but not found to contribute to the situation.

  Any help from the community will be greatly appreciated.

  Thank you

  Heath

  Default Windows can not decode DVD video, so you will need some reading software...

  Usually, when you buy a DVD player/burner, you get with it, WinDVD or PowerDVD software for video playback and some other software if the device may also burn discs... UNLESS the material was an OEM version, which normally does not come in a box like the commercial version, then you normally get nothing...

  So for now the easiest thing is to connect the drive to the laptop and then insert a DVD into the drive. Go to the Explorer, and then right-click the DVD by selecting drive open. You should now see two folders AUDIO_TS and VIDEO_TS. This indicates that Windows sees DVD disc material correctly and that he also sees the files in the DVD itself... Nothing wrong up to now...

  Now, go into the VIDEO_TS directory where you should see a bunch of files, a bunch of. BUP. IFO and. VOB files. The. VOB files contain the video code CSS while the. IFO files contain orders for DVD to play appropriate video channel (flow). Normally, the. IFO and. VOB files will have an affair with some reading software and double click on the VIDEO_TS. VOB file will launch the player. If the player is associated. Can manage files IFO CSS encoded DVD, playback will begin and you will hear the sound and see some video... If you have a drive associated with these types of files, usually autoplay will kick and the reading starts automatically on insertion of the DVD in your drive... But if you double-click and there is no software associated with this file extension, so there is no software associated with these files and you can't watch your DVD...

  But as mentioned, Windows does not capable by default DVD playback software, so you will need to install a DVD playback software... One solution is to contact the company (Dell?) who provided the external DVD player and ask them why you do not have the comercial DVD reading and DVD software of engraving that you expected would come with your hardware, they can predict it you if she should have come in your package, or they will tell you where you can download it from...

  If they won't help or they say it was hardware OEM and that it did not come with software, then consider using VLC to play your videos, as the software is free open source of quality. This page explains how to use VLC to play DVDs in Windows 8... You can also use ImgBurn for burning CDs and DVDs (not blindly just click on the buttons of large download on this web site because they are advertisements for * you need not, simply the page to the section of news where you have a download link)...

• Devote any space to a USB ready Boost permanently would make it unnecessary to keep the data from USB?

  Can the boost loan process be rolled back so that I can still use my USB key to store data.

  Hello

  You can disable ReadyBoost for a storage device.

  I suggest you to refer to the links and check if it helps.

  ReadyBoost turn on or off for a storage device 

  ReadyBoost

  Let us know the results. We will be happy to help you.

• How to turn a USB on a vm Server

  Hello world

  
  I hope you can help... I have an ESXi 3.5 by a couple of 2 k 3 Server. I would like to ask how to let the guest operating system to identify my USB? Is it ok to identify the USB of my client PC which has installed and connected to the ESXi iSphere?

  Thank you!

  Takami

  I guess you can access the USB by putting your Vm in the only network host and select the specific drive thum train your USB setting in the Configuration of the virtual machine section (access the setting od VM and search for the USB option)

  Concerning

• Usb otg lighting will allow me to transfer photos from iPhone 5s on a void flash drive?

  I would like to transfer photos directly from the iPhone to spare usb flash drives.

  No, the iPhone has no direct support for write in regular USB drives.

  There are some special wifi readers that can be used with iPhones and apps that allow it to write files out for them however.

  http://www.Macworld.co.UK/feature/iPhone/best-ways-get-more-storage-for-your-IPH one-or-ipad-3579792 /.

• GPIB to USB for obsolete Agilent test set

  Hello world.

  I am facing difficulties in using agilent connection expertise to implement communication between agilent8902b. I intend to use ACE to set up the connection and then use NI Labview to perform the programming of software (of course I'll use VISA). But im already stuck at this first step. I called agilent and they said that the equipment is old and no longer supported but they see how they can help me.

  During this time there at - there someone who can help me with this? I made that were corresponding to the GPIB and ACE GPIB address.

  Thank you

  Well, since you are using a controller of Agilent, you should probably start with their expert link. Even an old instrument should be detected. Why don't join you some screenshots illustrating the problem?