NI Vision Acquisition camera vs software
Hello
Where can I find an answer on the supported devices when you use the drivers and software "NI Vision Acquisition?
Tags: NI Hardware
Similar Questions
-
For cameras Baumer vision acquisition software
I have the EXG50 Baumer GigE camera.
On their website I found that it is supported by
Vision acquisition software 8.5
This means that it is included in later versions with Vision acquisition as well.
Or should I only use this version for the camera?
Is the reason I ask: I have the Vision Aqusition worm 8.6 software.
It works with the camera in MAX, but there a number of controls on the camera and picture on it has gone from left to right. Please see image attached.
I had similar problem. Deactivation of the resolved song data. Thank you.
-
Hello
I have big problems to install the Acquisition of Vision software to Windows (64-bit) with installed LabView 2013 SP1 (32-bit) 8.1. He finds himself in a blue screen after the computer is restarted.
My main problem was that I only had 'Vision Acquisition' express vi LabView 2013 SP1 Windows 8.1. So I installed this VAS2014.02 (http://www.ni.com/download/ni-vision-acquisition-software-2014.02/4584/en/) and it solved the problem, the vi in labview and works fine until I restart my pc. Because after the restart of the blue screen is coming. After several times of blue screens it came Windows 8.1 recovery menu. By selecting "Help for starting" or something similar (I have German OS) in "Advanced Boot Options", the system could be recovered with relatively little loss of data (work today has been lost, only yesterday the files were there). So I repeated the installation of VAS2014.02 and once again the same: blue screen after restarting Windows 8.1.
It is not compatible with it?
(but it is: NEITHER Vision Acquisition Software 2014.02 - Windows 8 32-bits/8 64-bit/7 64-bit/7 32 - bit / Vista / XP 32-bit/Server 2008/Server 2003 R2 32-bit)
What can I do to use the Vision Acquisition express vi into labView 2013 Sp1 Windows 8.1? I had lost the good part of the time today to operate without success. Thank you for your suggestions in tips!
Michael
Hi Michael,
I'm sorry for the problems you are faced with customer Service. There is a known issue with some software components which ARE pulled inward, which will cause the BSOD you see. The problem is examined formally at the moment, but in the meantime, the simplest solution is to remove the stand from the IO IMAQ for R series cards (1483, 1473R, 8237R, 825xR) as described here: http://forums.ni.com/t5/Machine-Vision/After-upgrade-to-NI-Vision-Acquisition-Feb-2014-Windows-does-.... If you require the use of these cards, there are other workaround solutions for which you can contact OR support that is formally addressed.
Kind regards
Joseph
-
Vision acquisition software lisence problem?
Hello, everyone
I have LabVIEW 2009 with the kit of development of all the
I programmed an application (I use IMAQdx for this application), then I create application ((application EXE, puis je construire installateur pour cette application)).I take this installer and I place it in another PC.
But he wants two lisence (Vision development module $ Vision acquisition software)
Why is he crying for this license? If I have it and deploy the application from my PC which have all lisences for Kits
Thank you
Alzhrani
Hello Al-Zahrani,
Bruce is correct. Need you a license to run NI Vision on the target computer, given that your application uses the functions of the Vision Development Module. I recommend you take a look at our section of the knowledge base on the National Instruments Vision software licenses. For more information on prices, I recommend looking at the product page NI Vision Development Module , specifically the "related software add-ons" at the bottom of the pricing tab that lists the price for the NI Vision run-time license.
David has
-
trial version vision acquisition software
I would try the purchase Vision software before ordering it. Is there a trial version?
Here is the download of the software.
The software should work for 30 days before he asks you to activate.
-
Vision acquisition software, activation of the library
I'm having a problem and I would be very grateful if you kindly help me through. I have labview installed 2011 and allowed on my pc, I also installed the acquisition of ¨vision software¨ from the CD of divers. Now, after some time, the acquisition of vision library stopped working and ask for activation. I bought the vision acquisition software separately and I have the activation code, but I couldn't find a way to activate the library installed on my pc. I would be grateful if you kindly answer as soon as possible.
Hello
try to locate and exploit "C:\Program Files (x 86) \National Manager\Bin\nilmUtil.exe.
(x 86 on my computer!)
He is the Manager of licenses, where you can activate your license. Right-click on 'Vision Acquisition Software' and activate it. Follow the instructions.
Best regards
K
-
Hello
I use version 9 LabVIEW and Vision Acquisition software and a USB 2.0 digital camera. My mistake is that when I run my VI, Vision Acquisition software cannot find the camera but cannot find if the VI is not running. (Below is the error I get). How can I solve this problem?
Hello END.
Still having the same error?
When you say "can find only if the VI is not running", can you elaborate on this statement? You are able to see your USB camera inside Measurement & Automation Explorer (MAX) and you are able to successfully retrieve the images from there? It will be the first thing to check. Because if it can capture images within MAX, then you will not be able to your VI.
You can also check that your Vision (SAV) acquisition software license is indeed enabled for your computer. You can check by going to the license OR Program Manager.
-
Vision Acquisition Express vi has stopped working
Hello world
The Vision Acquisition Express vi has always worked perfectly on my pc, but all of a sudden it stopped working today (I drop on the block diagram, but there is no window pop up or something,
I tried the following:
-restart the pc (did not help)
-Try the other express vi (including another vi vision express) (worked fine)
-convert in normal vi (empty vi as a result)
-Open properties with rightmouseclick (did not help)
-Open a doubleclick properties en example and rightmouseclick (did not help)
Someone at - it an idea?
Best regards
Henk
Hi Henk_kempen,
It's really weird. Do you know what happened to the VI/PC before that happens?
There are a few troubleshooting you can try.
1. this problem really close question assistant DAQ in this white paper. You can try the method in the link below to see if that solves your problem.
http://digital.NI.com/public.nsf/allkb/5CD79190713D2B558625765F007FCC99
2. repair of the software is another option. He has worked in many cases.
3. I try to avoid this problem, but reinstall the software can help in your case.
Best regards
TuiTui
-
Absent from most of the NI Vision Acquisition (Acquisition of images)
Hey, Navid,.
This is Alex from National Instruments. IMAQ specified version is not compatible with LV 2009 and I think that's the reason for which you are not able to access the functions. Click on the following link for a chart of compatibillity for IMAQ/IMAQdx pilots:
Compatibility tableI recommend you only install the latest version of the software for Acquisition of Vision OR which comes with the last 4.5 IMAQ compatible with LV 2009.
Vision acquisition softwareKind regards
A. Z'Atari
-
With the help of screws of Vision Acquisition with the PCIe-1429
Greetings earthlings,
Y at - it a tutorial/book white/site that can give me an introduction on the use of the Vision Acquisition IMAQdx screw to capture images using the PCIe-1429? I am brand new to this kind of thing and it is a little outside my area of expertise, and I don't know where to start. I don't even know the basics of a general approach for the implementation of the process. Any suggestions would be most appreciated. I am aware that I need to set up a file from the camera via the MAX application.
Thank you!
Candice
Hi Candice,.
There are a number of references on our site to help you get started. For starters there is the Manual and Quick start guide.
What device do you want to buy from? Depending on whether you have the camera, you can download the file from camera on our site. To learn more about the files of camera here, which includes links to where to find ready made camera files. Finally, there are a number of examples in the example LabVIEW and CVI finders that explain how to acquire images using IMAQdx. You can access these examples via
"' ' ' 'Help' example Finder. '" In the pop-up window, access the material record of entry and exit"IMAQdx.
-
Equium - Camera Assistant Software displays no toolbar
I just installed Windows 7 on my ex-Vista Equium and copied the * Camera Assistant Software * above for webcam but unfortunately I can not display the toolbar.
I opened the folder and selected * traybar * but when I select * see the toolbar * nothing appears.Hello!
First of all, you should tell us what satellite notebook you have.
Maybe your satellite cell phone doesn't support Windows 7 because are very few Windows 7 drivers and tools available. I think that you have downloaded the software of the camera for Vista and it seems thus that the software isn't working properly.
-
I have a chicony camera assistant Software on my toshiba laptop version 1.7.140.0157
I went to the toshiba Download Center to check for a more recent version, found a version of 1.7.115.0213I would like to know, pls, which is the most recent version?
Thank you
allureHey,.
Normally, I would say that the installed version is newer because it has a higher version number.
But why is it so important to you? If the internal webcam to work properly, I don't see a reason to update the driver for the webcam.
-
How to convert a file the camera assistant software undf video?
I recorded a video from the camera assistant software and I forgot to save it and it's a undf file and it won't play. It shows format undf. I tried a couple of conversion software, but it still does not play.
Can you please tell me which no model of laptop you have and which version of the software assist camera do you use?
On my laptop, I 1.1.1.10 version and I can set it to record in avi format. It can be played in several different players.If you put undf as a search term in Google you will find player undf by download. I also found the info you need Voxware MetaSound Codec for mediaplayer and you can find it HERE.
Test it.
-
Camera Assistant Software shows CEC_MAIN.exe error
Hi, I have trouble with my webcam software.
My Camera Assistant Software v. 1.7.171.0103 didn't work. Whenever I click on it, always show the dialog box: "CANNOT EXECUTE CEC_MAIN. EXE. Please reinstall this program. I reinstall the program but always display this box. So I can't use my cam. Strangely, it works if I try the face recognition...
Please help me... Thank you very much...
Hi mate,
Firstly all what laptop, you have exactly and what OS you are using?
I already read about it here in the forum and, normally, this error message appears if a security program (e.g. Firewall) blocks this program and you will have to unlock this file in the firewall. When searching the forum I founded it and maybe it s useful to you:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=171963𩾻 -
I accidently deleted Camera Assistant Software of Satellite A205 - S4777
I was wondering, I accidentally deleted my Camera Assistant Software for my laptop. How am I supposed to get it back. I looked in my program files and it disappeared completely. Is there a place where I can download the software again. I searched my computer everything for him and he is nowhere to be seen. I do not have an internal to the camera, but without the camera assistant software, I can't take pictures, or use my webcam. What should I do? Please, help me.
Hello
Please visit http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp and you will find the Camera Utility for Windows Vista. I hope this will help you to make it work again.
Bye and good luck!
Maybe you are looking for
-
Satellite L850 - after that the WLAN of WIn8.1 update light is always on
After Windows 8 for Windows 8.1 update the indicator lamp amber wireless is always enabled, even though the wireless feature is disabled. The key to turn on or turn off the airplane mode does not work.Wireless works in any case perfectly and enabled
-
Hello! I need to change my email University when asked to do so by the system whenever it turns easily on all my devices. But this time it was easy to do in my iPhone as usual. The problem is with my MacBook Air, when it asked for the password, I cha
-
Hey people, I can't find the calculator that came with my Windows 7 Home Edition... Ive used before but its accessories not in the just as if it was... Can I use it when I use the function search but I'd like it just use the icon. HELP please.
-
My PC works fine for just about everything, except when I need to pop in a CD or DVD. It seems random, but when I hit the eject button on the DVD player, my screens sometimes twinkle. It happens about once every 5 times as the button eject. I'm runni
-
The automatic maintenance status
Dear support team, I have noticed that over the last two weeks, Auto Maintenance message does not change.I ran the process several times, but it still shows the message: "automatic Maintenance has been delayed. Maintenance tasks will run at the next