Satellite L850 - after that the WLAN of WIn8.1 update light is always on

Similar Questions

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• server control of automatic release after that the server took control

  Hello

  I have a vi that is not automatically "lock control" after that the server has regained control.

  Currently, in labview 8.2, when the server takes over the control of a vi, one must first unlock control of vi (by right-clicking and selecting "unlock") before a customer can request control again. Does anyone know how to prevent the automatic locking of the vi from the end of the server when it regains control.

  See you soon,.

  BrissyDrew

  Thanks NathanK,

  I found a solution. When I used the vi at the server end I was selecting the wrong option when I right click. I was by selecting "take back control" when I should have been by selecting "controller of report. This last option helped a client to regain control when he asked for it without the server having to give it up first.

  Thanks for your advice.

  See you soon

  BrissyDrew

• I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here.

  Original title: what I am doing wrong?

  I just reinstalled Windows XP on a blank hard drive (new).  I have installed WLAN driver disk resource. I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here. What can I do?

  Hello

  The following articles may be useful:

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095 
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IR remote stops working after that the system will switch to standby

  IR remote no longer works after that the computer goes to sleep.  I use Windows Media Center (Vista) to the TV and use the remote a lot.  The ONLY way to make it work is to restart the machine, which is a PITA.

  In the device, here is what is displayed Manager...

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  I tried uninstalling, reinstalling the driver, unpluging the receiver IR USB, displacement of ports, etc., the software MS difficulty he tried, but nothing works.  It allows to work all the time, but these last few months, you must restart the computer to operate the remote control.

  Any ideas?  Help, please.

  BTW, it is a HP Desktop Media machine, and the remote control is the standard HP remote given out with their machines.

  Here is the official Microsoft fix for error code 38:

  Code 38: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory
  http://TechNet.Microsoft.com/en-us/library/cc772090%28WS.10%29.aspx

  Have you tried to deactivate "standby" and checked for the repetition of the problem with the IR remote?

  You can ask your question to the Media Center experts at the green button forum:

  http://thegreenbutton.com/

  Have a Word with the help of HP to see if they have a fix for the same.

• Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  the printer is not the shades of grey even print cartridge is not yet empty

  y at - it software for hauler color printing?

  Thanks for your comments

  Hello Nilsvolkel,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience and time.

  Do not require any special software.

  However, you can use the steps in the following articles and check.
  Reference:
  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

  http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

  Please keep us informed.

  Thank you

• After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized.

  After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?

  Original title: old start bar

  Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.

• Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

  Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

  Hello

  Thanks for the quick response.

  What web browser do you use to access the links in my previous post?

  If you use Internet Explorer, I suggest to optimize Internet Explorer settings and check if it works.

   

   

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

   

  Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

   

  If the problem persists, you can reinstall the drivers for the Tuner card and check with the question.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  [Fixed spelling - Mod]

  Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.

• My pc was broken and I had to by one. I did backup cd:s. I downloaded backups on CDs in the new pc, but I can, t open Premiere pro cs 5.5 application. How can I download Premiere pro cs 5.5 in my new pc after that the old pc was broken?

  My pc was broken and I had to by one. I did backup cd:s. I downloaded backups on CDs in the new pc, but I can, t open Premiere pro cs 5.5 application. How can I download Premiere pro cs 5.5 in my new pc after that the old pc was broken?

  You can download at the bottom of the link:

  Download CS5.5 products