NIC dedicated for each VM VS a single NETWORK card

Similar Questions

• Will VSA works with single NETWORK card

  Hello

  I have a question about the unit of storage in VSphere. As far as my knowledge is concerned, while we initiate the deployment of the VSA Cluster on two or three host scenario, a virtual appliance VSA is installed on each host computer, which automatically creates a HA cluster and creates two standard switches by default. Each VSA appliance has two network cards, one for the front-end server and one for the back-end.

  My question is if I have only one physical NETWORK adapter present on my Esxi hosts, VSA will work correctly? I asked this question to a few friends and they me says that it will work and both the front-end server and the back-end NICS will be connected to a single virtual switch with which the physical NETWORK adapter is connected. I've never tested and I do not have an environment who test him too. Anyone of you can test it for me?

  Thanks in advance.

  Sorry for the confusion, the VSA 1.0 does not work with ESXi having only single-port Teddy.

• For each field of the single target field mapping Source

  Hello

  New on BPEL 11 g and was looking for suggestions if I could use transform map to squeeze a bunch of source text fields in a single target field?

  For example

  XML source

  < name >

  XYZ < name > < / name >

  ERF < name > < / name >

  < name > As < / name >

  < / name >

  Target XML

  < name > Xyz; ERF; llmg < / name >

  Or I have to go to the help for each activity and allows the same Assign activity?

  Thank you.

  Hello

  Don't need a loop, string-join(/Names/Name,';') Xpath function returns Xyz; ERF; llmg...

  See you soon,.

  Vlad

• NIC dedicated for comments?

  I have a windows 2008 server running VMWare server 2.

  I have two Windows Home Server invited.

  I have 3 Ethernet connections on the server.  I want to dedicate to Windows Home Server guests so that they each have their own card NETWORK and bandwidth.

  I see in virtual networks of Manager I can assign the physical NIC to be reduced to specific virtual network adapters.

  How can I assign the specifc virtual network adapters to a specific customer?

  When you add a network card, I'm must select "Briged, host-only, and Nat" and does not who bridged adapter to use.

  Any help would be appreciated.

  savante21 wrote:

  How can I assign the specifc virtual network adapters to a specific customer?

  Do you see these VMnet virtual network Editor? You use such a VMnet (switch/virtual network) assign a physical network card. After that, you assign a virtual NETWORK adapter to your guest. When you do this, you can choose the VMnet which should be used for this virtual NIC.

  When you add a network card, I'm must select "Briged, host-only, and Nat" and does not who bridged adapter to use.

  Open is the default connection that is bridged. In the virtual Networkj Editor: it's VMnet0 and it should already be assigned to one of your NIC you can use for the desired person.

  The other VMnet can be used by choosing 'Custom', then the VMnet.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• need for server 2008r2 Pavilion p7-1000 network card driver of (tried win7 drivers N.G.)?

  Hello

  I'm trying to install the server 2008r2 on the HP Pavilion p7-1000, has four cores amd 64 bit cpu, 8 GB ram, 1 TB hard drive.   For some reason I can't seem to locate the drivers for the NIC realtek.  Of course, I'm pressed and trying to accomplish something in a single day.  And many other things at the same time.  I never thought that this Server 2008 would have a problem with a common network card.

  Someone has a direct link to a kind of driver that works with this?  I tried to go to the realtek, and perhaps I simply downloaded the wrong software.  But what I 'As' on their part, did not work.  I tried a "auto-install" program, but also what I THOUGHT it was the real Server 2008 drivers for the network card.

  Thanks for advice and guidance

  Hello:

  Have you tried this one directly from Realtek site?  a 3rd on the list... According to this record in the series, they have 8105E card.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Paul

• How to get 2 virtual NIC works when there is only 1 physical NETWORK card?

  Hello

  Running VM Fusion 2.0

  I want to create a Virtualversion of Ubuntu that will have 2 virtual network cards which is both connected to my NIC physical 1

  I added the network cards successfully, but when I run ifconfig eth0 only arises

  I edited the vmx file by adding the lines below, but without success

  ethernet1. ConnectionType = "custom" ethernet1.vnet = 'vmnet2'

  Someone knows how to do this?

  See you soon

  Tom

  I guess that you configure additional virtual networks in Fusion by using something like: Advanced Networking Configuration - Tokamak Networking Scripts for VMware Fusion , since vmnet2 does not come configured out of the box with the merger and there is no way in the GUI to do.

  I interpret what you're trying to do like the creation of two virtual network cards in a time filled with the same physical NETWORK card in the Mac VM. Can you explain what you are trying to accomplish by doing that? This configuration can cause two interfaces with an IP address on the same subnet, including many UNIX-like (and Windows) nuclei do not take very kindly.

  You may also check the Ubuntu network configuration (to ensure that the new NETWORK adapter is enabled and configured).

• Dedicated for each channel from multiple channels in a single task task disadvantage

  Hello

  My current acquisition software (C + c++ / GCC) encapsulates the methods rather clumsy niDAQmx C to interface with the data acquisition equipment in a class that represents a task of acquisition. This way I can create several instances, for example counter input, analog input, analog output, their terminals and the class supports all work low level as ensuring input analog fake internal is started if there are only counter entries such as the sample clock starts, or configure reminders N-sample, etc.

  It seems to work very well, and also the time seems to be good, because first of all the tasks on multiple instances of my wrapper. For triggered early, that I use

  DAQmxCfgDigEdgeStartTrig(mTask,mTriggerTerminal.toAscii().constData(),DAQmx_Val_Rising)

  in-house.

  Now my real question: what is the advantage of multiple channels, when everything seems to work fine with multiple tasks and only one channel per task? I don't see the disadvantage, it would first classify necessary acquisitions in types (I, ao,...) because several strings in a single task must be of the same type. With my approach I need not care because each channel still gets its own task.

  I don't know I'm missing something here. Maybe someone can explain it to me, maybe some limitation of multi-tasking, I have not yet read.

  Hey!

  Unless you specified for managing the it (simultaneous sampling) or modular instruments and hardware devices (see link )

  You cannot perform two tasks at the same time that access to the analog inputs, for example, because the

  ADC is a shared resource that is connected to a multiplexer, and that only one task can work in it at a time given. (see here )

  Similar restrictions often apply to other types of operations.

  I'm not aware of any performance issues, perhaps a little more memory could be used.

  So as long as your hardware supports what you are doing, you should be ok, I think,

  and it is only a question of clarity and intelligibility, ease of use and structure.

  As you use classes, I'm sure you've heard about encapsulation - so it is a

  question of how you want to design your application.

  In addition, when you work in LabVIEW, tasks feel more natural to the principle of data flow, because you have a thread for your data acquisition,

  and it works very well with our modes of standard design.

  So, if it is better for you (and works with the hardware), you can give all the channels its own task.

  Hopefully this might clarify some things,

  Kind regards

  Rome

  OR Germany

• HOWTO add properties custom for redhat linux vm after 'Clone, Linux with a single NETWORK card.

  Hello

  How can we add the custom properties to a new linux vm after clone of model with the vco workflow?

  Something like ' / bin/echo x.x.x.x >/etc/newfile ", run this with sysprep or something (not ssh) inside the new VM for linux with a vco workflow.

  
  Someone at - it an idea about it?

  Thomas

  If you can't get it by sysprep, you can use the VIX plugin for vCO to run a command in the guest OS once it is deployed and under tension.

  http://labs.VMware.com/flings/VIX-VCO

• How to set up several headphones in a single NETWORK card?

  Hello

  I have a test server with a NIC I want to set up two listeners, one for the shared server and a dedicated. Is this possible?

  Hi all

  I had solved it. I follow the procedure below.

  1. create a dispatcher as below

  ALTER system set dispatchers ='(protocol=tcp) (SERVICE = orcl1.nuggetlab.com)(CONNECTIONS = 1000)';

  2. create the tnsnames.ora as below

  ORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST = nugget01) (PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl.nuggetlab.com)

  )

  (CONNECT_DATA =

  (SERVER = SHARED)

  (SERVICE_NAME = orcl1.nuggetlab.com)

  )

  )

  3. create the listener.ora as below

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = orcl.nuggetlab.com)

  (ORACLE_HOME = C:\app\oracle\product\11.2.0\dbhome_1)

  (SID_NAME = ORCL)

  (SERVICE_NAME = orcl)

  )

  (SID_DESC =

  (GLOBAL_DBNAME = orcl.nuggetlab.com)

  (ORACLE_HOME = C:\app\oracle\product\11.2.0\dbhome_1)

  (SID_NAME = ORCL)

  (SERVICE_NAME = orcl1.nuggetlab.com)

  )

  )

  LISTENER =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = nugget01) (PORT = 1521))

  )

  ADR_BASE_LISTENER = C:\app\oracle

  4 lsnrctl > service should show as below

  LSNRCTL > service

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=nugget01) (PORT = 1521)))

  Summary of services...

  Service "orcl" has 1 instance (s).

  Instance "orcl", State LOAN, has 1 operation for this service...

  Managers:

  "DEDICATED" implemented: 78 denied: 0 status: ready

  LOCAL SERVER

  Service 'orcl.nuggetlab.com' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" implemented: 20 denied: 0

  LOCAL SERVER

  Service 'orcl1.nuggetlab.com' has 1 instance (s).

  Instance "orcl", State LOAN, has 1 operation for this service...

  Managers:

  "D000" put in place: 4 refused: 0 current: 1 max: 1000 State: loan

  DISPATCHER

  (ADDRESS = (PROTOCOL = tcp (PORT = 51961))(HOST=nugget01))

  The command completed successfully

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=nugget01) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - product

  Start date March 31, 2014 16:40:26

  Uptime 0 days 3 h 6 min 0 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File C:\app\oracle\product\11.2.0\dbhome_1\network\admin\list

  C:\app\oracle\diag\tnslsnr\nugget01\listener\alert\log.x log listener

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=nugget01) (PORT = 1521)))

  Summary of services...

  Service "orcl" has 1 instance (s).

  Instance "orcl", State LOAN, has 1 operation for this service...

  Service 'orcl.nuggetlab.com' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Service 'orcl1.nuggetlab.com' has 1 instance (s).

  Instance "orcl", State LOAN, has 1 operation for this service...

  The command completed successfully

  5. test of connection as below

  sqlplus scott/tiger@nugget01/orcl1.nuggetlab.com

  It works very well.

  Thank you everyone especially Ed, Sb, Onkar Sybrand...

• Software exists for the creation of a 'virtual' network card and going to all the traffic on the local network through a proxy server, then by this adapter?

  I can access net through LAN and my college requires a proxy for all access to the internet. If you want to use the internet, it is impossible to do not use a proxy. This is a problem for many programs that do not seem to allow you to enter the proxy settings.

  any software is to create a 'virtual' network adapter that will pass all traffic network (or any protocol x traffic) through the proxy?

  So I have do not need to enter the proxy anywhere... and I have normal internet access.
  What I saw is possible with OpenVPN, but it is a vpn service that I need .i just want to use the feature. In OpenVPN I just enter my proxy server in its framework and OpenVPN to connect to a VPN service and routes all traffic to the FAUCET adapter after which I don't need to set the proxy address anywhere... so my idea is how can I use only the last part that is routing all my LAN traffic to a virtual card.

  Support the LAN---> proxy---> virtual adapter--->, then software I access the net

  That's what I like to do...

  Although I am facing this problem on Windows 7, solutions for all operating systems are welcome.

  P.S: Proxifier is not my solution to not offer something like this.

  Hi Sapan,
  Thanks for posting in the Microsoft community!
  You can use your favorite search engine and look for the software that meets your requirements.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Need help with "Clone, windows with a single NETWORK card.

  Hello

  I'm trying to get this to work of workflow in order to create a virtual machine from a model (or an another VM) and customize (IP address, DNS...). I already did the same thing with my Linux VM and it worked as expected, but with the Windows VM I lose connection with vCenter whenever I run this workflow. "Just before it finished I got this error:" ""the server vCenter Server "link from my server" connection has been lost "

  So the result is: the new virtual machine is created, but the IP address of the model/VM frim is what it is cloned.

  Any idea what can cause the crash of the mu vSphere client every time I throw the third workflow?

  Can someone try this workflow and complete the settings and show me a screenshot so I can know where it wen wrong (certainly the network configuration).

  Thank you in advance! any help would be appreciated!

  EDIT 2: forget it, who had a problem with VMware tools running at the same time of the configuration...

• Clone, Linux with single NETWORK card

  I have a question where im trying to use the name as a parameter and connect it to CustomerName, but deployment keeps failing saying that spec.identity.hostname was not correct. What I'm doing wrong here? I don't want to have to fill name and host name

  http://www.vmwareadmins.com

  http://www.vmwarescripting.com

  That's what I thought.  The process of customizing of comments don't like special characters.

  If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

• External hardrive dedicated for backups or huge 3 teg hardrive

  I have two Macs. The two are not up-to-date on the operating system. One is a former PPC-Intel Power Mac G5 (running 10.4.8). This PPC has logic music software from apple and other software, that I like to keep the versions they all. I want to back up the entire hard drive please. Never done and need to know how?

  The iMac I see a time machine... .the iMac running 10.6.8 and it seems pretty simple how to backup.

  My question contains the questions above for backup but also do I need a hard disk dedicated for each backup of the computer, or can I partition a huge hard drive.

  Also, so just save a computer for example do I need a dedicated external hardrive or can I use a space between an external hardrive with enough space for a backup.

  I know that this issue contains various aspects of a question and different computers and versions so I appreciate the answers really. Thank you very much!

  Every Mac should have at least 1 backup HD dedicated. When it comes to backup, it is wise to also have redundant backups because too backups fail! I have 3 Mac (iMac, Mac Mini & MacBook Air), each has 2 HD attached for redundant backups. Although I know that it is more expensive that you wanted to hear, it gives a pretty good backup level. It would be extremely rare to lose the primary storage and two backups, but I lost the primary and a backup at least 2 times!

  In my case, I use Time Machine and SuperDuper as my backup solutions and also to use OWC (www.macsales.com) as my EHD.

• Problem with: Clone, windows with a single NETWORK adapter

  Hello

  I have some bad problems while trying to use the following workflow: 'Clone, windows with a single NETWORK card. I always get the following error message: "task"CloneVM_Task"error: a specified parameter was not correct. "

  "Spec.Identity.Password.Value (name of the dynamic Script Module: vim3WaitTaskEnd #20).

  So I guess I have a problem with a password but I don't know what password, I give for the input parameter "channel passwork. It is encrypted if the indicator planText partner is false"I do not understand what password I would give here because I do not give any account of domain user.

  Is there anyone who has already used this workflow and can give me some advice on how to use it properly?

  Any help is appreciated.

  Thank you

  If I remember correctly, that's your administrator password local if it has been defined or the new password set if the model is no password defined. But then I did years ago doublecheck Yes.

• Single NETWORK adapter with 5 IPs

  Hi guys,.

  I'm new to ESXI 5.5 and have a question. My server has a single NETWORK card and I got 5 fps by my ISP. I want to run 4 virtual machines on my server. I want one of the IPs to be assigned to the hypervisor and the 4 other IP address to assign to each host.

  Is this possible with a single NETWORK card, if so, can someone guide me in the right direction on how to accomplish?

  Thank you!

  Unless your service provider restricts the number of MAC addresses on the same switch port (your uplink port), there is nothing special you need to do. Simply assign an IP address to the host as well as each of the virtual machines. That's all.

  André