NIK has lost with the PS upgrade

Similar Questions

• Location of the computer has changed with the HDD Upgrade

  I live just outside OR Belfast. I just upgraded my HARD for one SSD drive. My computer is an iMac late 2009.

  I had a lot of alerts on my iPhone while allowing this new record, since it is considered as opening session on a new computer, which is perfectly fine. But authorities said that the location of my iMac is now in MANCHESTER, England (including the alert when I logged on my Apple account to ask this question)! Should I worry?

  I'm fighting to understand this. When I go in the Date and time preferences it gives my correct location. Local Apple authorized company to upgrade my HARD drive order in the SSD, probably from Manchester, is there something integral to the SSD which gives a Manchester location? If so, is it possible I can reset?

  Thank you

  Location Services uses the location of the router is using your Mac. The Mac itself has no possibility to determine its location. Extract from on location Services in OS X and Safari - Apple Support:

  Your approximate location is determined using information from local Wi - Fi networks...

  The iMac may contains a location cached to a bygone era - that of FSAA install the SSD. Time zone of your Mac (in system preferences > Date & time > time zone) is based on the extensive location of the IP address of your router and can simply choose the closest major city.

  If so, is it possible I can reset?

  Perhaps. Open system preferences > privacy and security > protection of personal information. Authenticate, then deselect Enable the location Services. Select again.

  If this does not work, try cycling the power on your router.

  If it still does not work, give it a day or more resets automatically.

• GPS number race Nike Run Club with the Apple Watch 2 series

  I have my Apple Watch 2 configuration with the Nike Run Club app.  Repeatedly, I tried to run without my iPhone (6 current execution 10.0.2) and for some reason that GPS doesn't seem to work. While I open a session is running, pace/time is completely off and it isn't GPS data capture because cards do not appear in the app once I connect and send the run. Also, I assume that the GPS does not work because the pace is so far off the coast. It seems to me that it is logging tracks using the accelerometer, which has not yet been resolved as I want to be able to connect the tracks using GPS.  I need help. Has anyone else had the same help as he attempted to use this app? I bought the watch to replace an old Strip, Nike +, in the hope that I could run without the phone, but it has been an uphill battle implemented.  The Nike Run Club app not yet been updated in order to make full use of GPS data from the Apple Watch?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• Firefox Version 27 Action Menu error in Reporting Services. An error has occurred with the extraction of data.

  Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.

  When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.

  An error has occurred with the extraction of data. Please, refresh the page and try again.

  I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27

  Any help would be appreciated. Thank you!

  Ryan

  Firefox version 28.0 has corrected this problem. Thank you!

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Pages has lost ONLY the ability to print the envelope templates.

  Pages for Mac has lost ONLY the ability to print envelopes pistols (Mac OS 10.11.4 Pages 5.6.1) corrupt app? How to restore without buying new program?

  Test installation of response to my email.

• My 3 year old has played with the computer and now my screen is sideways. How should I do?

  My 3 year old has played with the computer and now my screen is sideways.  How should I do? I tried my computer and went through everything on the screen and doesn't change anything.

  Here's how to do hold Ctrl + Alt and then press the arrow keys on your keyboard.

  or right click on desktop, select options graphics then Rotation.

• We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  The PC is an installation of Windows 7 Professional 64 b NL.

  Hi,

  The downgrade isn't possible for customers Volume of the former traditional products... license for individual buyers.

  Kind regards

  Sheena

• Increase the performance of MAC with the SSD upgrade

  I have a 21.5-inch iMac model 14.1 (end 2013) with 8 GB of memory and a 1 TB drive. On this, I use some applications in memory such as Adobe CS 5.5 and VMWare Fusion 8.1.1. I have Applecare on the machine until September 2017. I often find myself running out of memory. My goto solution would be to increase the memory and replace the hard drive with an SSD. I fear, however, that this cancels my Applecare. My research indicates that while that frowned upon, I can upgrade my memory and keep my Applecare as long as it is done by an authorized by Apple, but if I do the SSD I'm out of luck for the installed components. My thought is that I can get an external SSD and move the ' WIndows 10' VM (s), as well as expand and move the swapfiles for the SSD system.»

  My questions are am I right about the Applecare and warranty and I plan to use an external SSD to accelerate performance and ease the work of memory constraints?

  I have f

  I have a Macbook Air in 2010 and also a 2008 iMac - both with only 4 GB of memory (you have twice as much), both running El Capitan and the two with SSD - and perform very well. The 2008 iMac used to have a rotating disc which has recently failed, with the replacement of SSD, it is a remarkable transformation with the new SSD, it seems very quickly for me. Both have Photoshop CS4, which is not used much more, but they run this software very well, as well as MS Office 2011 and other programs such as Mail, Safari, Firefox, etc. (Firefox + Photoshop together put a noticeable load on machines, in fact, but while I sometimes hear the fans come on the Macbook Air, it maintains not up very well) No slowdown) You'll be in great shape with a SSD for your newer computer. These old machines that I use have Core 2 Duo CPUs, chips relatively slow, but they seem very quickly with the SSD.

  You will need to check with Apple directly on your AppleCare and so that would be affected. I don't know that anyone is not Apple should trust this question.

• Is there a way to know if the current modules are compatible with the latest upgrade of Firefox before running the update?

  I want to know if my Add-ons and current themes are compatible with the latest update of Firefox before running the update.

  Hello azdec.

  You can check the add page - we in addons.mozilla.org so it's just one or two. In my view, there is an extensions in the Gallery of modules that allows you to see if your modules are compatible with the newer versions of Firefox. But you'll have to look for them, because I don't know how it's called.

  I remind you that if you want an add-on to be compatible with a newer version of Firefox, you must contact its author.

  In addition, the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

• Key and original Windows XP disc has activation with the re-installation problem

  My old machine running on Windows XP Professional exploded in April. I bought a new one and installed the original software (performed by a technician here in SA) disc.

  Microsoft raised a question on the authentic software and I provided all the originals to the Microsoft Help team, but my technician was to get Windows running again may 23 (after 8 days of waiting for a response from the Microsoft Help Center).

  Today the Windows operating system were asked again for activation - but it says that it is enabled.

  However I can not open a session.

  Is the product key: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

  The bar code on the label said hologram: 99994-625-347-755 b X 12-08297

  THE CASE WAS REFERENCE: 1177290811 and THE DATE was 22/23 May 2012.

  I was dealing with Jatin Gandhi, who has not responded to me since last week when I sent him an e-mail on the caveat on the question of the activation.

  I am running Windows XP because I have the drivers for instruments that are not upgraded to the other windows.

  Concerning

  Margie Hengstberger

  Hi Margie.

  Let me start by saying that is a bad idea to share your first and last name on a public forum. It is just as bad validate your product key. Fortunately, it has been blocked or deleted.

  Then, the majority of us who provide assistance here does not work for Microsoft. We are volunteers who give of our time and our knowledge. Therefore, your file number and the name of the person who helped you is of no consequence to us.

  With that, on the way, we will, if we can solve your problem. It is clear from your message and correct me if I'm wrong, that you have a Windows disk that was used to install Windows Xp on your current computer by some technicians where you live. Validation/activation issues have emerged, now, with the current computer. Apparently the technicians who installed Windows on your current computer gave you the Windows disc. Am I correct so far? If not, please tell me what I'm missing.

  In the interest of time assume that my interpretation of the scenario is correct. I would be very surprised if the disc you received is legitimate. It seems that the computer was in the period 30 trial when you received that would explain why you now get a request to activate Windows. The period seems to be very close to matching the scenario I described as well.

  Personally, if it was my computer and I had paid someone (the technicians who installed Windows) to the computer or to install Windows, I come back to that person and ask it be fixed. I think maybe it's where is the problem and who is responsible for this problem.

  For now, I will provide you with instructions to reset the trial period. However, the number of times that this is limited to four. Therefore, once the new trial has started, you will need to solve this problem one way or another, with technicians who have installed Windows on the computer.

  The trial of Activation reset:
  ------------------------------

  1 turn on your PC

  2 repeatedly press F8 and go to Safe Mode

  3. connect according to the normal
  (Note: administrator password is usually empty, or use the recovery password if CD does not know the password)

  4. leave the Office to fully charge (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)

  5. click on start - run

  6 type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)

  7. wait a few seconds (although you won't see any change)

  8 restart your PC normally (start - stop - restart - Ok)

• Problems with the Express upgrade and an upgrade key

  Before I've had my laptop, I have purcahsed a Windows 7 Ultimate upgrade disks and Windows 7 Professional. I used the ultimate update on my desk and I try to use the Professional on my laptop (which came with home premium).

  The problem is that I now have a "non-genuine" copy of Windows 7 because every time the upgrade does not accept my upgrade key. I understand that they are updated slightly different, but anyway that I actually purchased is more expensive than the anytime upgrade. How to make this work?

  Laptop has Windows 7 Home Premium. I used the Express upgrade to upgrade Windows Professional. Now activate Windows asks me to activate Win7 professional and will not accept the key that came with my Windows 7 Professional upgrade disks. The Activation Assistant says that I don't have the OS to use this key. The online troubleshooting guide says that such an error would occur if I am trying to use the upgraded edition to do a clean install (for example).

  I don't understand, how were you able to upgrade to Windows 7 Professional in the first place through Windows Anytime Upgrade? You have been invited to enter your key first. Windows 7 Home Premium license that you upgraded was activated before the upgrade to Windows 7 Professional through Windows Anytime Upgrade?

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link to change your product key

  Enter your product key and use the phone Activation to activate your license. Be sure to explain your situation to the Appeals Officer.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Switch ME3600 flash has lost in the IOS update

  Hello!

  During the attempted upgrade on ME-3600 X-24CX-M C03, we lost flash.

  It is a subject for RMA, or could do us something with her?

  Switch #$[email protected] / * //me360x_t-universalk9-tar.155-3.S3.tar
  Current copy... C
  MIF [5]: 0 files, directories 1
  MIF [5]: Total number of bytes: 4386816
  MIF [5]: used bytes: 1024
  MIF [5]: available bytes: 4385792
  MIF [5]: fsck MIF took 0 seconds.

  File ucode0 system: formatting
  Current copy... C
  MIFID [9]: 0 files, directories 1
  MIFID [9]: Total number of bytes: 65802240
  MIFID [9]: used bytes: 1024
  MIFID [9]: available bytes: 65801216
  MIFID [9]: fsck MIF took 0 seconds.

  State of success, to create ramdisk = 0
  flashfs [25]: 0 files, directories 1
  flashfs [25]: 0 orphaned files, orphaned directories 0
  flashfs [25]: Total number of bytes: 72124416
  flashfs [25]: used bytes: 1024
  flashfs [25]: available bytes: 72123392!
  *Sep  9 15:59:52.179: Loading me360x_t-universalk9-tar.155-3.S3.tar !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  [OK - 71055360/4096 bytes]
  !!!!!!!!
  *Sep  9 16:00:39.391: Loading me360x_t-universalk9-tar.155-3.S3.tar !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Please wait until you receive the message is 'Extraction of Image' success, or any other message Bill failed!

  looking at the picture...
  extracting information (91 bytes)
  extraction me360x_t-universalk9-mz.155-3.S3/info (368 bytes)
  extracting information (91 bytes)

  Type of system: 0x00010000
  The iOS Image file size: 0x02721A00
  Image file size: 0x043C3A00
  Required minimum DRAM: 0 x 08000000
  The image suffix: universalk9-155-3. S3
  Directory of the image: me360x_t-universalk9 - mz.155 - 3.S3
  Image name: me360x_t-universalk9 - mz.155 - 3.S3.bin
  Image device: IP | LAYER_3 | MORE | SSH | 3DES. MIN_DRAM_MEG = 128

  Original_path = flash: / .bin
  Backup_path = file .bin for sync
  Backup_dir =
  Ignore backup option...
  Old image of switch: flash: me360x_t-universal - mz.153 - 3.S5
  Old image is deleted before you download.

  Deletion of "flash: me360x_t-universal - mz.153 - 3.S5' to create the space required"
  Extract images from archive in flash...
  me360x_t-universalk9-MZ.155-3.S3/ (directory)
  extraction me360x_t-universalk9-mz.155-3.S3/psoc_nile.dld (34378 bytes)
  extraction of me360x_t-universalk9-mz.155-3.S3/uImage (2549219 bytes)
  extraction me360x_t-universalk9-mz.155-3.S3/info (368 bytes)
  extraction of me360x_t-universalk9-mz.155-3.S3/controlfpga_w2.bin (341628 bytes)
  extraction me360x_t-universalk9-mz.155-3.S3/mrt_cisco_w2.exe (34378 bytes)
  extraction of me360x_t-universalk9-mz.155-3.S3/me360x_t-universalk9-mz.155-3.S3.bin (41025130 bytes)
  extraction of me360x_t-universalk9-mz.155-3.S3/whales2-handofffpga.bit (3279980 bytes)
  extraction me360x_t-universalk9-mz.155-3.S3/psoc_w2.dld (34378 bytes)
  me360x_t-universalk9-MZ.155-3.S3/HTML/ (directory)
  extraction of me360x_t-universalk9-mz.155-3.S3/html/foo.html (0 bytes)
  extraction of me360x_t-universalk9-mz.155-3.S3/whales2_cfm-handofffpga.bit (3279980 bytes)
  extraction me360x_t-universalk9-mz.155-3.S3/whales2board.dtb (24161 bytes)
  extraction of me360x_t-universalk9-mz.155-3.S3/rootfs.ext2.gz.uboot (20435319 bytes)
  extracting information (91 bytes)

  Installation (rename): "ramfs:update/me360x_t-universalk9-mz.155-3.S3"->
  "flash: me360x_t-universalk9 - mz.155 - 3.S3'.
  Current copy... CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCmifs[8]: Error writing sector 39026 error 3

  % Error writing flash:me360x_t-universalk9-mz.155-3.S3/me360x_t-universalk9-mz.155-3.S3.bin (i/o error)
  Copy without success
  Ignore backup option...
  Ignore backup option...
  Removal of Ramdisk

  Switch #dir
  % Error opening Flash: / (Invalid Argument)

  Switch #sh flash:
  Directory of flash: /.
  % Error opening Flash: / (Invalid Argument)
  No information available space

  Switch #dir flash: /.
  % Error opening Flash: / (Invalid Argument)

  Switch #dir/all
  % Error opening Flash: / (Invalid Argument)
  Switch #.

  Hi who doesn't look good, if the internal flash is gone sound very probably an RMA number

  It gives you even an option to put lightning bolt?

  Try this

  fsck flash: This checks the file system and it retrieves

  flash format: This reformats the flash

• iPhone battery has decreased with the Apple Watch

  I recently got a Apple Watch for Christmas, I've been very happy together and have (almost) no complaints with the watch in general. Although I noticed that my iPhone's battery life has decreased considerably since I've matched with Apple Watch. Instead of returned from a day's work with 50-60% on my iPhone. my phone is almost dead at the end of the day. I have an iPhone 6 and 38 mm Apple Watch Sport. Does anyone have a solution, or even a final reason for this issue?

  Hey SupaCupa,.

  The following article has a number of useful tips to extend the life of your iPhone battery - Batteries - maximize Performance - Apple

  Thank you for using communities of Apple Support.

  Calculation of the happy.

• Get lost with the controls on the panels

  Hi all,

  With the help of Lavwindows 2010

  I have a little difficulty with my UIR.  I inherited a project with several panels, 2 have about 340 controls on each of them, I'm looking at (for example) a certain (RATE) control properties. I use the tree Panel to get the table I want and the FREQUENCY control.  I double click on the name of the control RATE.  In the details (under the tree Panel) section, it shows the name of the constant is MLED_MAX12_2 and its status led (its really a digital slide).

  Is it just that CVI has trouble with panels containing a large amount of controls?

  Is there another way for me to access this control? (right click on RATE and by selecting OBJECT UI FIND gives me the properties of the control MLED_MAX12_2.

  Is there a limit to the number of controls on a Panel? of the project? File of the UIR?

  Thank you

  Pete Hedlund

  I couldn't reproduce it in 2010 SP1, so I tried in 2010, and I could reproduce the bug. This problem has been fixed in 2010 SP1.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/12323#290057_by_Category

  The solution is to change the control in the edit control dialog box that appears when you click on , when a control has focus in the editor the user interface with the editing tool selected (as opposed to the tool of exploitation). Or you can double-click the control to display the edit control dialog box.