NIMAX generate a report from command line

Similar Questions

• I need to increase the memory available to an application from command line (DOS window)

  At the cmd prompt, I perform the mem command and get the following. I have 3gig of ram but the mem says I have 0 contiguous extended memory available? Is there a way to access this memeory?

  memory 655360 bytes total conventional
  655360 bytes available in MS-DOS mode
  578240 largest executable program size

  1048576 bytes total contiguous extended memory
  0 bytes available contiguous extended memory
  941056 bytes available XMS memory
  MS-DOS resident in high memory area

  This solution does not work, thanks for the reply but. I found that Vista locks going to the Command.pif running cmd from Windows users, so even if you terminate the process cmd it active again. I also found a mistake in one of the sons were he mentions emm396.exe as a way to check the emm on Vista memory. My Home Premium installation isn't emm386.exe.

  Anyway once again don't thanks for the help no wonder that many stores do not use Vista. There are a number of development tools that run from command line.

• RoboHelp 10 accidents from command line

  I am trying to build a project in robohelp at the command line and it crashes. Work of building manually in the IDE.

  Show event log:

  The failing application name: RHCL.exe, version: 0.0.0.0, time stamp: 0x4ff35c65

  The failed module name: HtmSingleSourceMultiScreenHelp.dll, version: 10.0.0.287, time stamp: 0x4ff358bc

  Exception code: 0xc0000005

  Offset: 0x0000f38a

  ID of the process failed: 0x7f8

  Start time of application vulnerabilities: 0x01cfc3baef76dd63

  The failing application path: C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML\RHCL.exe

  Path of the failing module: C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML\HtmSingleSourceMultiScreenHelp.dll

  Report ID: 30ffeec3-2fae-11e4-9ddc-f4ce46ba20d2

  The generated log shows that it crashes right after that she recorded "treatment of the index... data." ».

  It seems to be same problem here: generation Multiscreen or Responsive HTML5 (RHCL) command line

  What can I do to get this building on the command line with success? I have 4 other projects I'm doing this in the same way with and they generate the output very well.

  Given that the accident occurs every time when he treats clues I decided to create a new index (with copy of the checked) and then deleted the old index, so the problem disappeared.

• Windows of different sizes from command line

  Hello

  I'm running Firefox and - width - height of command line options. The problem I have is that these settings are ignored if a Firefox window is already open. In this case, all of the following windows are open with the size of the first (original) window. It does not matter what I type for width and height. These parameters are used only for the first window, when Firefox is actually started.

  I've mitigated it wrong before with javascript used in web pages to resize the window to the document load event. Now I have to upgrade to the latest version and resizeTo does not work on windows that are not open via window.open.

  What are the options I have to open multiple windows of Firefox with different sizes? They all use the same profile.

  We use a very specific environment, closed and controlled with a web server and not internet access. There was no need for update of Firefox 4. Now, we want to upgrade, but this change in functionality prevents us from the upgrade. Because the computers of our customers are on CentOS 5, we would be upgrading to Firefox 17 which is part of the standard CentOS 5 distribution.

  I wrote a bash script that made a list of the windows, firefox lance made a list once again. It then searches the differences in the lists of before and after opening firefox. In the end, the script uses wmctrl to change the size of the window which were found also recently opened. There is a small chance that some other window might appear while the opening of firefox and it will be be reduced too. However, in our case, this probability is very low and it is not worth.

  Here is the script which takes 3 parameters: width, height, URL.

  #!/bin/bash
  
  diff(){
    awk 'BEGIN{RS=ORS=" "}
         {NR==FNR?a[$0]++:a[$0]--}
         END{for(k in a)if(a[k])print k}' <(echo -n "${!1}") <(echo -n "${!2}")
  }
  
  window_count=$(wmctrl -l | wc -l)
  
  windows=()
  
  wmctrl -l > output
  
  exec 0<output 
  
  while read id type machine name
  
  do
  
    windows=("${windows[@]}" "$id")
  
  done
  
  # width and height in this call are ignored if some other firefox window is already open
  
  /usr/bin/firefox -P profile -width $1 -height $2 -new-window $3 &
  
  new_window_count=$window_count
  
  while [ "$window_count" -eq "$new_window_count" ]
  
  do
  
    #echo waiting...
  
    sleep 1
  
    new_window_count=$(wmctrl -l | wc -l)
  
  done
  
  new_windows=()
  
  wmctrl -l > output
  
  exec 0<output "$id")="" "${differences[@]}"="" $i="" -e="" -i="" -r="" 0,-1,-1,$1,$2="" <="" differences="($(diff" do="" done="" for="" i="" id="" in="" machine="" name="" new_windows="("${new_windows[@]}"" new_windows[@]))="" pre="" read="" type="" while="" windows[@]="" wmctrl="">
  
  done
  
  I had to do some tweaking in the script to fool the HTML editor. Some formatting of text is performed, that is not source friendly. That is why the script might look formatted strangely.
  
  </output>

• How to access the disk HARD recovery from command line?

  Hello.

  I have a little trouble with my toshiba Satellite. My system crashed and I forgot to create the system recovery dvd.
  I can't access the "Toshiba HDD Recovery" when I start from another DVD Windows-7, but io accesses the recovery of HARD drive on drive D: with the command line. Is it possible to start the drive HARD recovery manually?

  Kind regards
  Marco

  I know something like this isn't possible.
  If you did not create a recovery disk and you cannot start the HDD recovery procedure, you can order the new Arvato recovery disk

• How do you access iCloud drive from command line?

  I'm on OS 10.10.5.  On any Finder window, I see iCloud drive listed (with subfolders, some created by me, others not).

  How can I look at them from the point of view "unix"?  That is, from the command line.  When I do:

  $ sudo find /-name iCloud\ in car

  He finds a /System/Library/PrivateFrameworks/CloudDocsDaemon.framework/Versions/A/Resource s/iCloud Drive Drive.app/Contents/MacOS/iCloud file, which is an 'executable x86_64.  I'm afraid to run it from the command line.

  Can someone please tell me how I can watch some entries in folder under "iCloud Drive" via command line?

  Thank you.

  Tena

  I can access m iCloud drive of documents from the Terminal by entering

  CD ~/Library/Mobile\ Documents/com ~ apple ~ CloudDocs.

  This will set the current directory to the root of the drive to iCloud.

• Develop an application from command line using LabVIEW

  Hello

  Is it possible to generate an executable command line (CLI) uses LabVIEW? This CLI exe is called with some arguments in command line by another application (written in Visual Basic). The LabVIEW run-time engine can be installed separately on the host PC.

  Thanks for your help

  Siddharth

  The only way I found is to create command-line 'wrapper', where the DLL based on LabVIEW is called. So you can not only pass parameters to the command line application, but also the return values of CLI app.

  Check this thread: tool command line that returns a value

  Andrey.

• Request signatures (sign your App) from command line

  Is there a way to "request for signatures" from the command line?

  I'm doing my deployment during development much easier and without having to enter my password of signature.

  java-jar "C:\Program research in Motion\BlackBerry JDE 4.6.0\bin\SignatureTool.jar" - a - c - p

  should work just fine.

• Windows 7 Defrag from command line does not work

  We are running Windows 7 in a virtualized environment. When you run windows defrag hourly use of the command line, it does not work. The order that I will execute as administrator is

  C:\Windows\System32>defrag/c

  Microsoft Disk Defragmenter
  Copyright (c) 2007 Microsoft Corp.

  It displays the above message and leaves back to the command prompt. However if I run the defrag C: command it does not. Defragmentation from the GUI works so as long as both drives (C: and system reserved) are selected and when I click on defragment drives, works very well.

  I am concerned about defrag from the Task Scheduler with the command ' defrag/c' (self programmed to help set up the calendar... from Disk Defragmenter) does not work and the system never gets defragmented automatically.

  This only happens with some of the windows virtual machine 7 we have.

  There are no entries in the event log that point to defragmentation (using the Task Scheduler). Anything can happen on the ideas?

  Hello Sebastian,.

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better suited to the audience of it professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• How can I print spare part in a PDF file from command line?

  For my organization, we have a lot of .pdf files, each of which contains several .pdf files in their midst as attachments (i.e. a single .pdf file that contains other .pdf files). I know that I can print a .pdf file with the following command via the command prompt.

  "C:\Program Files (x 86) \Adobe\Acrobat ' / n/t 'filetoprint.pdf' '\\printerserver\printername '.

  Although this example shows the PDF in question, it does print all attachments in the file 'filetoprint.pdf '. I've scoured google and these forums, but I did not seem to find a switch or anything that would allow me to do. Does anyone have any suggestions? It must be done by the command line. I'd appreciate any help! Thank you!

  ~ Justin

  After much research, I found the answer. Start with, rather than using a .bat file, I used the wizard of the Action to set up a script. Then, I put the script to process all the files in a given folder. I changed the folder that will contain all the files in .pdf (including attachments) that I wanted to deal with. Then, I wrote the following javascript code:

  var d = this.dataObjects;

  pp var = this.getPrintParams ();

  pp.interactive = pp.constants.interactionLevel.silent;

  pp.printerName = "\\\printerserver\\printer";

  This.Print (pp);

  var oDoc;

  for (var i = 0; i)< d.length;="">
  {

  oDoc = this.openDataObject (d [i] .name);

  oDoc.print (pp);

  }

  Yes, it isn't command line as I originally wanted, but there is still work for what I need to do. It looks like you can trigger an action from a VBA Macro or something, even though at this point, I think it's more trouble that it's worth. in any case, I hope this helps anyone who has the same problem!

• VMware Player 6.0.1: Howto from command line, for example, where is vmrun?

  Hello

  I installed VMware Player 6.0.1 on openSUSE 3.1 by using the serial number that I received with Fusion Professional 6.0.2.

  Virtual machines spin if they are started through the user interface, but I would like first of all to them via command line.

  Question: How can I start virtual machines from the command line? I've read that vmrun must do the job but I can't find this command.

  Did a search on my system: no file vmrun lie.

  Any idea where I get vmrun of?

  Thanks for your help,

  Fred

  It is installed separately and is available under the tab drivers & tools of the VMware Player download page.

• Take the input from command line

  Hello
  
  I have a sql file with multiple accept statements.
  I would like to run this script from the DOS command line and provide the script with values for declarations to accept it.
  How can I do this? (I don't want to change the sql for this file)
  
  Kind regards
  HJH

  I have a sql file with multiple accept statements.
  I would like to run this script from the DOS command line and provide the script with values for declarations to accept it.
  How can I do this? (I don't want to change the sql for this file)

  Create the text file and put a value per line in good condition. For example, you have the script following script.sql:

  accept V1 char prompt 'Enter value for V1:'
  accept V2 char prompt 'Enter value for V2:'
  
  prompt Your input : &V1 &V2
  
  exit
  

  Text file values.txt might be the following:

  ABC
  DEF
  

  Then, use the following syntax:

  sqlplus.exe /nolog @script.sql < values.txt
  

• Build errors from command line in the newspaper. How can I fix it?

  Version: RH 9 (latest version)

  OS: Windows 7, 64-bit

  Output: CHM

  I have a batch file that uses features of generation of HR command line to generate our CHMS regularly.

  The command line works for my other projects. But I have a project that has three different CHMS issued, and each chm of the project always fails.

  Each three generated log file contains information to that effect.

  Adobe (R) RoboHelp version 9.0.0.228 project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: d:\hg\pcdmisqa\pcdlrn\help\toolkitmodules\PC-DMIS Toolkit Modules.xpj

  Presentation: Toolbox Modules - various.

  Output: D:\DocProjects\Outputs\common_chm\toolkitmodules.chm.

  Scanning for the compilation project...

  Error: Impossible to analyze all project files. Please use RoboHelp to recover the project.

  Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHTML.

  Any ideas? Moreover, these AIDS compile fine with HR itself.

  Okay, deleting the CPD and reimport the file HHP to recreate the XPJ and all other project files fixed this problem for me. They seem to be build by using the command line now.

  But he created a LOT of work: build all the page layouts should be recreated and all conditional compilation tags had to be regenerated.

  If you go this route, be sure to make a backup of your project first you may have to refer to him to get things back the way they were after the import process.

• I wanted to disable Windows update service from command line. can you help me please on this?

  I wanted to disable Windows Update service by command line can help me on this.

  Hi Vikas Sharma,

  We do not recommend to disable the Windows Update service.

  However, you can try following step below:

  > In the Windows command line type the following command, and then press ENTER:

  > start wuauserv sc config = disabled

  Please let us know if that helps.

• W530 - activate the camera from command line?

  Hi guys,.

  I searched for a way to activate and capture and image of the camera integrated in the command line. Does anyone know how to do? I have a W530 with Windows 7 64 bit.

  Thank you!

  Lenovo is not a tool like this, but I did a quick search on google and found a few utilities in the sample and the code:

  http://batchloaf.WordPress.com/2011/04/06/Snapz-a-command-line-cam-image-grabber/