nimxs.exe automatically processes the call VISA::viFindRsrc.
The process nimxs.exe running in the background automatically call VISA::viFindRsrc whenever the device I tested is connected to my computer. The device is connected as a network card. This process is finding various devices on the network and with up to 15 seconds to complete each time. Meanwhile, it tends to lock the resource, I'm trying to send commands to with Labview and causes the following error.
VISA: (HEX 0xBFFF000F) specified type of lock cannot be obtained, or specified operation cannot be performed because the resource is already locked.
This problem started when I updated NI-VISA of 4.1 to 5.1.1. Is there a way to disable this automatic search for network equipment? The only time I want to pick up equipment is when I opened NOR-MAX.
Hey Ryan,
Is this a problem for you to have the service disabled? You should not need unless you want to be able to automatically detect the LXI network devices.
We will continue to investigate the issue and rated fixes for future versions.
Tags: NI Hardware
Similar Questions
-
Can someone advise please? I copy all my photos from SD card in my iPad and the use of the Photoshop Express application to modify. iPad is set to optimize the storage of photos from device. Edit app Photoshop Express small size kept on the device, copy or automatically will process the iCloud a life-size?
I guess you'll have to manually lower the file full resolution first. I would ' t think that any application would just go and take it automatically from the Cloud. You may need to check if you have not already.
-
The call for a process when you click the link export v4.1.1.00.23
Version 4.1.1.00.23
Hello
I have 6 Classic reports on the page.
Each report has link active Export.
I need to insert the set of results that is questioned about the report in a table. Each report is independent of each other.
Each report has its own table to insert the result set in.
My thought was to call a process Page when a user has clicked on the link export, but the process is not known. I put: apex_application.g_print_success_message: = 'Insert '; in the process of the Page to tell if the process was called. I think that the process is not called because the page is not sent when the user clicks on the link to the export. It is purely a guess.
What I tried:
Working with just the first report, I created a page element hidden in the region of the report and created a calculation before heading for the region ID.
SELECT region_id FROM apex_application_page_regions WHERE application_id = :APP_ID AND page_id = :APP_PAGE_ID AND region_name = 'My First Report Region'
Then on the wording of the link for the link export in the attributes report I put:
< a href = "f? "p = & APP_ID.:124: & SESSION.: FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us" > Export CSV - my first data reports < /a >
The Condition, that I used in the process of the Page is:
Point process: submit now - after calculations and Validations
PL/SQL -: REQUEST = FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us
of course, that didn't work so I tried it - "FLOW_EXCEL_OUTPUT_R" | & P124_ESSCSD_REGION_ID. | "_en - us
and I tried it - "FLOW_EXCEL_OUTPUT_R" | : P124_ESSCSD_REGION_ID | "_en - us
None of which worked.
SO, can someone help me with a solution called a process to insert the data in the report, when the Export link is called?
What information can I I provide/clarify?
Thank you
Joe
Knew that I had seen cela somewhere... Try to watch this blog of Martin D: D'Souza Giffy Martin on Oracle APEX: APEX report download recorder
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
Adobe Acrobat Reader DC (15.010.20056) update automatically. I'd rather have the possibility to download and install or not. How to disconnect the automatic process?
Hi steveg83673202,
You cannot change the preferences of update for Adobe Acrobat Reader DC. KB doc. for reference Adobe Reader and Acrobat updater settings | DC, XI
Kind regards
Nicos
-
Automatic processing of the files in the folder
Is it possible to use the ODI to automatically process a csv file, immediately it will be deposited in a folder without the user clicking anything?Hello
WaitForData works with mask (IE *.csv). For example
Expect that the sale of 5 minutes *.dat files every second in the c:\sales_in directory, then copy those files in the C:\sales_ok directory. Not crush.
OdiFileWait-ACTION = COPY - DIR = c:\sales_in-PATTERN = * .dat - TODIR = c:\sales_ok - FILECOUNT = 0 - TIMEOUT = 350000 - POLLINT = 1000 - CRUSH = no
I copied the wrong link in the previous thread. The correct is
http://gerardnico.com/doc/ODI/Webhelp/en/ref_tools/snpsfilewait.html
-
The call for a process of application using JS by a button
Hello
I need to create a button that deletes the entire table All_References lines.
I have created a new process of shared components "Delete_All_References" call, then set it to run on demand.
PL/SQL block:
Begin
Delete from All_References;
End;
/
In the HTML header of the page on which lies the button 'Remove all references' or P13_DeleteAllReferences, I entered in the following:
< script language "JavaScript" type = "text/javascript" >
function Delete_All_References()
< /script >
I have then entered the settings button, set the action to "defined by dinamic action", then added onchang = "javascript:Delete_All_References();" "in HTML table cell attributes.
According to most of the tutorials when I click the button remove all the button of refereneces, my table should now get clear but it doesn't.
Can you guys please help?
Thank you and best regards,
DiezThe onchange event will work fine. Change the button back to a normal button instead of linking to a dynamic Action for now.
The only other thing I see which can cause a problem is your call to the method itself.
OnChange = "JavaScript:Delete_All_References();" »
Need to replace...
OnChange = "JavaScript:delete_all_references();" »
The called javascript method is case-sensitive.
Let me know if it suits it.
Malay Keith
www.blackhawkenterprise.com -
I have the code I entered in my document to place the signature on the form. Y at - it a code or a setting that I can put to automatically enter the address email of the person who I send the form? Also, I would use my own default message for the signatories. Is there a place that I can get that think so I can't copy and paste the message every time? I still need to sign first, and therefore a default section with my choice and message to signatory would be great.
Hello Kevin,
From now on, you cannot set the recipient's e-mail address in the document itself or let him choose automatically. You must provide either the Web portal or even using the API, the e-mail address of signatory manually. According to the models of message, if you have account level business, you can set it by going to the tab account-> account settings-> Message template,.
Kind regards
-Usman
-
oradim.exe automatic restart of windows
Operating systems: Windows server 2003 r2
DB version: 10.2.0.3
When the instance is down, windows tries to automatically restart the instance using oradim.exe.
But it is not picking up correct pfile so that it starts. I want to change that.
Windows automatically runs the following statement: (from oradim.log)
C:\oracle\product\10.2.0\db_2\bin\oradim.exe-demarrage-SID db123 - usrpwd * - log oradim.log - nocheck 0
Not able to understand where it picks up this info.
How do I change that to pick up different pfile?
I checked HKEY_LOCAL_MACHINE\system\currentcontrolset\services\oraclestartdb123, have info related to oracle.exe
Thank youADK wrote:
is it possible to know with what parameters oracle.exe call oradim.exeas suggested by renee_mathieu, if I run the following command, oradim-edit - sid - pfile "new_path", it collects will be this new pfile next time if she tries to restart in a similar situation?
If you use oradim-edit - sid... a registry key will be created similar to:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_
\ORA_ _PFILE This key value will be read during startup of the service of oracle.exe and used.
If you want to dig deeper, you can use a Microsoft Sysinternals Process Monitor tool on the server/host to capture activity during the start of the service.
Use your search engine of choice to learn more about Process Monitor (especially the filtering of events).
For example, on a local test system Process Monitor shows the following for one of my test case (abbreviated version):
Process name:
Oracle.exeCommand line:
C:\oracle\11.2\database\bin\oradim.exe-demarrage-SID v112 - usrpwd xyzxyz"" - log oradim.log - nocheck 0On this system, I do use a pfile file but you can see what spfile served as follows (short version):
Operation: IRP_MJ_CREATE
Result: SUCCESS
Path: C:\Oracle\11.2\database\database\SPFILEV112. ORADon't forget that there is collaboration between binary/process/registry is not always as obvious as you might like.
-
My vista kept getting this error when I run the program.
Can anyone help?
My Pc is currently running Vista edition with Service Pack 2 installed.
The processor of my PC is Intel Q2800 CPU Quad Core @ 2.33 Ghz
RAM is 2 GB.
Since a Google for "iptv.exe" brings up links indicating that the file is malware, your computer is not clean or the malware has been removed without removing the call for the program to start. I would go through the steps to remove malware described on the link that I have already given you, do not skip the preparatory work. If the machine is then be clean, manage your startup to remove the entry.
Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually, it will be blocked by Windows Defender, and you need to allow it to run so that you can then check the box that says in effect, "don't mind to this subject again".
Important - do not use the System Configuration utility to stop the process. Use Services and stop all services, unless you really, really know what you're doing.
The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135
MS - MVP - Elephant Boy computers - don't panic!
-
schedule a process to call a process every 3 minutes
Hello
I would call a process every 3 minutes to check the documents that I can use the SOAP or EJB. Can someone help me on how to call an automatic process every 3 minutes.
Thank you
Assume that:
P1 is the process that you want to call every 3 minutes
create a process named P2.
In the process P2:
1 Add a subprocess activity and set to call P1.
2. Add an activity Point to wait and 3 minutes.
3. connect the route to subprocess (just make a loop)
now invoke the P2 process manually (by right clicking, and then Invoke) in the workshop.
Your P1 will be get invoked by the P1 assistance process every 3 minutes.
Nith
-
IPhone 6 does not display the caller of time during the call
Hi, when I get a call or call someone, my Iphone displays the call only. How can I change to decide the call times?
Hello ghtung,
Thank you for using communities Support from Apple. I know that seeing not only the timer for the duration of the phone call on your iPhone, it's not what you expect. Because this is not the expected behavior of the iPhone software, I recommend the following steps to troubleshoot and resolve this problem:
First, restart the device as the closing down and starting process is important to keep the iOS software works correctly. Then test again the question:
Restart your iPhone, iPad or iPod touch
If you are still missing the call timer after reboot, your next step would be to make a backup of your personal data and then reset the setting on your iPhone. Now, don't worry, this will not affect your content. All your contacts, photos, music and other stuff are all safe. What it will do is give your custom to the factory default settings. Background, images, sounds, fingerprints and stuff like that will be set up again. Then test the issue again.
The backup of your iPhone, iPad and iPod touch
Import photos and videos from your iPhone, iPad or iPod touch
Reset the settings of the iPhone - iPhone user GuideSee you soon!
-
How to stop the "sweetpacks" opens automatically on the tabs?
When I open additional tabs, the new tab automatically displays the URL of the sweetpack and sweetpack search engine. I uninstalled the program and cookie associated with sweetpacks. There is no associated with sweetpacks modules or plugins. I am a new user of firefox download firefox yesterday. The engine sweepacks of research seems to have come with the download of firefox. How can I get rid of sweetpacks?
Always download Firefox from the official site on www.mozilla.org. If this is where you have Firefox, then the malicious software was already on your system and it hung in Firefox, when he started.
The latter seems likely, given that you have not enabled malicious extensions. Read the following article. Remember to update the various anti-malware applications before you scan your system.
If this does not resolve the problem, visit a forum specializing in the removal of malware.
-
The foregoing. When I opened a new tab in the past, before the new update, firefox would automatically highlight the text in the address bar, and I couldn't just start typing here the address of the site that I wanted to. I could quickly get anywhere I want in less than a second. Now, I need to drag, and then click on in the bar every time to address. I installed an add-on called "custom newtab", but it slows down just me lower due to a lag between opening a new tab and the add-on kick and highlighting the contents of address bar.
What is happening is this:
Click "new tab".
New tab opens blank, and the text appears highlighted "google.co.uk" for about a quarter second.
Loading the Google page and highlight the text becomes not for another second quarter.
The module comes in and highlights the text "google.co.uk" Meanwhile I have already started typing and end up losing the first part of words, sending me random web pages and research.Why this change? Difficulty please!
Hi ChrisYeomans, a change has been noted in other threads on google.co.uk
The http URL now automatically redirects to https. Since you did not specify the Protocol in your newtab.url setting, Firefox attempts http and it is immediately redirected to the https domain. You should be able to see this happen unless your computer is much faster than mine.
Firefox does not handle this redirect elegantly - the URL in the address bar is not enabled unless you click a different tab, and then click back.
To work around the problem, update your newtab.url to the URL https://www.google.co.uk/ full
-
Automatically loads the page with https
Firefox will automatically load the following sites using https
If I type in
cgets.comIt automatically goes to https://www.cgets.com
If I type in
Google.comIt automatically goes to https://www.google.com
Why is this and is at - it a way to stop if to do this?
Current version of Firefox may prefer a secure connection if you have never used a secure https connection to visit the pages on a Web site.
Try to set the Boolean browser.urlbar.autoFill false pref on the topic: config page.
See 'Prevent Firefox to automatically complete URLs':
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
-
I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?
iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.
Maybe you are looking for
-
Pavilion g6-1270si: HP Pavilion g6-1270si Notebook PC Windows 10 drivers
Hello Is there any word on when windows 10 drivers will be available on the Web site for my laptop? My HP Pavilion g6-1270si Notebook currently has no drivers for windows 10 and I am unbale to use the features of this portable wireless. Windows live
-
read the multiple analog inputs at the same time
Hi all I use USB-6001 and want to develop an application to multiple tasks in C++. I try to read several analog inputs at the same time, but got some errors. To put it simply, I copy one of the sample code to read in analog data in a channel, and the
-
How to disable the command CHKDSK - Check Disk start up for Windows 7
I have some problems, when I start my laptop I am prompted with a black screen saying I found no solutions on how to disable this on my computer, but I want to because after the seconds say 1, its stays for a while... and I've left on during some tim
-
in windows media center live tv set up the problem. it pop ups tuner not found.
TV a hinged ir extension decoder but why I couldn't jooin a network m.?
-
Hi all I notice on the vty lines too slowly. Nobody knows who can be caused and how to fix it? Thank you