No access access/Limited - no access Internet (Windows 7)

Similar Questions

• I cannot access internet Windows XP.

  Hello

  My name is Tommy and I need help. My desktop computer shows that it is connected to the internet, but when I try to use any application that requires the internet (IE, firefox, chrome, League of legends, etc..) I get a 'connection error' / Web page isn't reachable. Internet works on my parents and my sisters computer, so I don't think it's a problem with the router (even if they're using wifi). My firewall will not turn on either. I tried a reset winsock, but to no avail.  I ran a few antivirus scans and eventually find a sitting trojan.muldrop in my System Volume Information folder, and I deleted it with by Dr.Web CureIt. After the removal of the virus, my computer will still not access the internet, and I can't turn on my firewall. Please help if possible!
  Thank you!

  Original title: my computer says it is connected but cannot access the internet.

  Hi Tommy,.

   

  Please contact the Microsoft Community.

   

  I would have you look at the article-

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

  Do get back to us and let us know. We will be happy to help you.

  Thank you.

• Unidentified network - no access Internet (Windows 8 HP, with a Windows 7 Start Menu)

  This problem happened to me a few days ago...

  I don't remember what my laptop model is, and I don't know how to find out. :/

  This is the info that gave me with ipconfig/all:

  Microsoft Windows [Version 6.2.9200]

  2012 Microsoft Corporation. All rights reserved.

  C:\Users\Sadie>ipconfig/all

  Windows IP configuration

  Name of the host...: MyNewLaptop

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Local Area Connection wireless LAN adapter * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct virtual card

  Physical address.... : 68-94-23-A1-3C-B1

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: RT5390R Ralink 802.11bgn wireless adapter

  Physical address.... : 68-94-23-A1-3C-B7

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address Ipv6 local link...: fe80::693b:8445:4 has 82: 33fe % 13 (favorite)

  Autoconfiguration Ipv4 address. . : 169.254.51.254 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 325620771

  DHCPv6 DUID customer...: 00-01-00-01-18-2D-49-B9-84-34-97-97-DB-74

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet Ethernet adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Description...: Realtek PCIe FE Family Controller

  Physical address.... : 84-34-97-97-DB-74

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {362B64C3-A604-48E9-AC1B-562C7155A35E}:

  State media: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter #5

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Please help me? I really appreciate any help...

  Your welcome, thanks for the information.

  I found some information on your computer, and I have this link which includes troubleshooting wireless networks. Open the link and try these steps to help fix your problem.

  Let me know if it helps.

• Windows vista local access only or limited to the Internet

  I have windows vista on a dell insipirion laptop, purchased in January 2009

  It came with mcafee anti virus already installed, that I removed after the test free and replaced with norton 360
  I use the modem usb 3g for my access internet and had no problems for 6 months

  for about 2 months, I had problems with connecting to and browsing the internet

  My 3 States of modem usb connected with good signal window
  but internet explore cannot display web pages

  the icon at the far right of the taskbar displays access: Local only

  If I click on this and open 3 modem status, under the general tab it has...
  Local IPv4 connectivity
  IPv6 limited connectivity

  If I click Properties, click the Networking tab
  Protocol version 6 (TCP/IPv6) Internet is not always checked
  I check this box, dissconnect 3g, re-connection 3 g, go back to the box to find still uncontrolled

  I have connectivity limited for some time before it becomes local only for awhile, then it finally gives me access to the internet for a short time before going back to local only access. the only thing I can do is to disconnect and reconnect and hope to have online long enough before again losing connectivity internet limited or local connectivity

  IV a 3g send me a new modem
  so have uninstalled and reinstalled the modem

  Reference Dell helped me to put the laptop into the factory State

  Reset all settings to internet explore and disabled all add ons

  diagnostic tells me that I have a problem with one or more network cards, but dell tell me im using a usb modem if it isn't the network cards that have the problem

  Please someone help me to heal this problem of limited connectivity and local only access before going bald of pulling my hair

  Hello Gemzy,
   
  Thank you for choosing Microsoft answers forum for windows vista.

  There are several things that we can try to solve this problem.

  Let's start by disabling all other connections to try to force the wireless connection to request the information needed in the router.  So go to start > Control Panel > network and sharing Center > manage network connections.  Click on each link listed EXCEPT the wireless LAN connection, then click on disable this network device.  Then see if your wire will connect.  You may run the diagnostic and repair utility on the Network and Sharing Center menu to force the wireless card to request information from the router IP.

  If all else fails, go back into the network and sharing Center, manage network connections and right click on the wireless network connection and select Properties.  Then click Internet version 4 Protocol and select Properties.  Click in the box that says "Use following IP address" and enter the information that has been shown in IPCONFIG report for your connection to the Wired Local network above.  Do the same for "use the following DNS servers."  Make sure that you type the IP address, mask subnet, default gateway, and DNS addresses exactly the same than the connection to the Local network was when he got the information from the router.

  To learn more about how to troubleshoot network connection problems, see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  If none of these things work let us know and we will continue to help you.

  Kind regards

  Savan - Microsoft technical support.

• After the upgrade to the 10 window, can not access internet in firefox or chrome

  After installation, try to use firefox and chrome, it wouldn't go anywhere, IE edge works very well. Tried to reinstall both programs, does not work

  Said Chris_ilias

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-networking/programs-have-no-Internet-access-in-Windows-10/6fb72587-B195-4301-a7d6-2040af513957?auth=1

  One of the solutions proposed in this thread is to reset the Windows TCP/IP stack. In another thread on this reset, several users have posted their newspapers which doubled indicating "access denied" you probably need to run cmd.exe as administrator to overcome that if this happens to you:

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_web/Windows-10-TP-cant-connect-to-Internet-through/97e1885e-790b-4D4F-92d4-6b1d97e8c85c

  There are many articles on this for older versions of Windows, but it is not so well documented for Windows 10 again. Here are a few articles for reference:

  • http://www.geeksinphoenix.com/blog/post/2015/06/16/how-to-reset-your-network-adapter-in-Windows-10.aspx
  • https://support.microsoft.com/en-us/kb/299357 - Windows XP through 8.1, says this will fix some registry keys

• After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.

  After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.
  I reinstalled the latest firefox, still cannot access Internet from Firefox.
  Microsoft is ridiculous?

  1. Run cmd.exe as administrator
  2. Type "netsh winsock reset" and then press enter
  3. Restart the PC

• Unable to access Internet Explorer 9 using Windows Vista, Service Pack 2

  I use Vista, Internet 9, desktop pc, cannot connect to Internet Explorer, get the message "Internet Explorer cannot display the webpage."  I click on diagnose connection problems and he says: "Windows cannot find any problems with the network connection on this computer."  Using Netgear and router.  All the lights are on, all connections are secure.  Two of them have reset several times that I care to mention.  I access internet using my wireless laptop or directly related.  Lower right of the screen on the task bar, it shows double computer and Internet Explorer icons.  When I click it, it brings up the network and sharing, and it shows the lines between desktop computer, network 2 (home network) and the Internet. But I can not connect to internet at all of this office.  I could, until what I deleted temporary files, run MS Security Essentials, then defraged.  Help, please!  I am in desperate need!  :-(

  Thank you

  Hello

  Method 1:
  Use the Internet Explorer (No Add-ons) mode, and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Method 2:
  I also suggest you to consult the Knowledge Base article and check if it helps:
  http://support.Microsoft.com/kb/956196

  Method 3:
  Check if you are able to ping Web sites. You can try the following steps:
  a. click on the Windows "Start" button, then select the 'Run' utility in the start menu.

  b. Enter the following command in the field 'Open', then click 'OK ':
  cmd

  Command prompt opens in a separate window.

  c. Type "ping" followed by the URL of the Web site, you are trying to ping. You must leave a space between the 'ping' and the URL.

  For example, ping Yahoo.com, enter the following command:

  Ping www.yahoo.com

  d. apply the command by pressing the key "Enter" on the keyboard. You should see the information on statistics for the address ping IP is entered, including the number of packets sent, received or lost.

  If there is no packet lost, your Internet connection is working normally. However, if there are packages that are lost, you may have a problem with your Internet connection.

• Cannot access Internet on Windows Update

  I recently formatted my computer windows laptop. I'm using Windows 7 Home Basic Edition. After a day or two, I am unable to access the internet even if I am connected to the router. I even tried to access Internet through my cell phone using a hotspot. It too its display "NO Internet access. There is no problem with the router or my cell like everybody else uses it and its works very well. So I tried to system restore to a point where I knew I was able to use the Internet. And here it does not work... But even once after the windows update it stopped working. Again, I must use the system restore to make it work.

  I can't find the source of this problem? Because of the windows update or something else?

  The KB2705219 update could be the cause and uninstall that solved the problem for some users.

  To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

  But...

  In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  While it remains that uninstall the Win7 update than kb2705219 solved the problem for at least two users, you should consider the McAfee fix. At least two users had also reported having removed then reinstalled McAfee earlier in the day and their systems have increased back & run correctly afterwards.

  I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• I have a mobile without phone service, what can I strill access internet

  I have a mobile without phone service, what can I strill access internet

  Hello

  1. what operating system you are using?

  2. are you using Windows Phone?

  3. What do you mean exactly by phone mobile without service?

  For the Internet user on your phone, you will need to subscribe to any mobile service provider.

  If your phone supports the WiFi connection, you can use the Internet without any mobile service provider.

  If you need information about Windows phone you can view the query in the link mentioned below.

  http://answers.Microsoft.com/en-us/WinPhone/Forum

• Equity access between Windows Xp sp3 32-bit & 64-bit Windows 7 Professional

  Hi all

  XP sp3 sometime, I can access of windows 7 (64-bit) professional sharing some time cannot be accessed, even I can't enter network, windows 7 to windows 7 is ok, no any problem can still access. What should be is the problem?  Total 15 pc accesses this share all windows 7 except a Xp machine, is that occur only a few times, this time I make restart the pc (Win 7) then xp machine can access.

  Hello

  ·         Do you have an error message when you browse to Windows 7 from Windows xp?

  ·         Is that what happens on all windows machines 7 or a particular machine?

  I suggest temporarily disabling software antivirus (and any other security software) and firewall on the Windows 7 computer as a test and check if this solves the problem. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Alternatively, you can follow the steps described in the links for Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

• I can't access the windows update site

  I can't access the windows update site.  I get an error "Internet Explorer cannot display the webpage" even with CHROME.  I can go to any other website, except the windows update site. I am running XP SP3 with IE8 and Chrome... Help, please

  Angeline L.Gusoskey

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

  http://support.Microsoft.com/kb/956196 >

  I would recommend that you use your AntiVirus and AntiSpyware product to do a thorough scan in safe mode to make sure that all the remains of spyware and Trojans is deleted.

  UTC/GMT is 22:08 Friday, September 16, 2011

• Error code: 0xC800042D while trying to access the Windows Update Web site

  Original title: Windows Update error Access

  When you try to access the Windows update site to see what optional updates are available I got OxC800042D error message and can not access the site. Please tell us how to get around this problem. Thank you

  Hi AlanHy,
   
  These errors can occur caused by one of the following problems:
  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  Follow the steps listed in this article to resolve the problem:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

• Trying to access Internet Explorer, to get the message to choose a program to open it with

  I'm having a problem with my office. I've been tyring trying to access internet and a message popped up that said I had to choose a program to open this file, so I clicked on internet explore, and I couldn't always access the internet. I also have a message that says windows need to know what program opens a file. I also tried to restore the system and followed the steps, and then a message came that said has he accompanied an andhad problem to stop the system. Also, all the icons have the same image on them they used to have that they have individual photos tried to change icons to original images out there that did not work either. I need help to return to how it was originally. I tried just about everything that I could help him please.

  * original title - need help wth windows xp *.

  Looks like the exe file association is drunk

  Go here download the exe reg patch, unzip the double click on it

  In fact, you can get all themn unzip, and then double-click them

• Cannot access internet, check HTTP, FTP and HTTPS port settings

  Using Windows XP, cannot access internet.  The problems notified that Windows cannot connect Internet using HTTP HTTPS or FTP.  Said that it's probably caused by the settings of the firewall.  Adiveses to check the settings of the firewall for HTTP (80) port, the HTTPS port (443) and FTP port (21).  Did not inform how to do this.

  Any suggestion would be appreciated.

  Hello

  · What version of internet explore are you working on?

  · Were there any changes made on the computer before the show?

  I suggest you try the steps listed in the links below: how to manually open ports in Internet Connection Firewall in Windows XP: http://support.microsoft.com/kb/308127

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer: http://support.microsoft.com/kb/956196

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• Network AD - HOC detected on ipad 2 but access Internet No.

  I use a Windows Vista (Home Pre Version). I use a wired internet connection on my laptop & I want to share internet via wi - fi on my ipad.

  So for this I did the following -.

  1. Add the Ad Hoc network using a WEP password and
  2. share the internet connection option.
  3. successful connection and ok.

  I am able to detect the network Ad - Hoc Wifi on my ipad but not able to access internet. Or make a sign of the wifi on my ipad.

  I tried to use various Wifi hotspot software as Virtual Router / Connectify etc, but still the problem persists.

  Help, please.

  Did you connect your ipad to the ad hoc network? Or just to detect, it is, after you have entered the password, you were actually able to join the ad hoc network?
  In your PC or laptop, you must:
  1 wired or wireless Internet connection shared.
  2 wireless ad hoc network, which means that you need a wireless DEDICATED ONLY to this AD - HOC network card, so if in step 1 you choos to use the wireless card to share your Internet connection, then you will need a SECOND wireless CARD to configure your ad hoc network.
  Your best shot would be to share Internet via the CABLE connection dedicated card wireless ad-hoc network.
  In my case, I chose to share-wireless ad-hoc (2 wireless cards) wireless, I tested with - wireless, both working just end, vista ultimate OS, iPad 2.
  Skype: Jose celada, Seattle WA