No access LAN via D7000 downloading
Hi all
I've been a happy customer until I discovered this problem. Now, I'm downloading a file of 110 MB on my Google Reader via the web, in time, I decide to do in my other PC via remote desktop, in my local network, and it does not work!
The D7000 is so busy to transfer this file which is not able to do anything else! What type of piece of engineering is it?
I suggest to read section 6 of the manual user "optimize Performance" and look at the QoS
http://www.downloads.NETGEAR.com/files/GDC/D7000/D7000_UM_EN.PDF
Hope this helps
Tags: Netgear
Similar Questions
-
Customer remote cannot access the server LAN via VPN
Hi friends,
I'm a new palyer in ASA.
My business is small. We need to the LAN via VPN remote client access server.
I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.
Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.
Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.
Who can help me?
Thank you very much.
The following configuration:
ASA Version 7.0(7)
!
hostname VPNhost
names
dns-guard
!
interface Ethernet0/0
nameif outside
security-level 10
ip address 221.122.96.51 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.42.199 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
dns domain-lookup inside
access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
access-list allow_PING extended permit icmp any any inactive
access-list Internet extended permit ip host 221.122.96.51 any inactive
access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.43.10-192.168.43.20arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list VPN
nat (inside) 1 access-list PAT_acl
route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
username testuser password 123
aaa authentication ssh console LOCAL
aaa local authentication attempts max-fail 3no sysopt connection permit-ipsec
crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
isakmp enable outside
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
isakmp nat-traversal 3600
tunnel-group testgroup type ipsec-ra
tunnel-group testgroup general-attributes
address-pool testpool
tunnel-group testgroup ipsec-attributes
pre-shared-key *
telnet timeout 5ssh timeout 10
console timeout 0: end
Topology as follows:
Hello
Configure the split for the VPN tunneling.
Create the access list that defines the network behind the ASA.
ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0
Mode of configuration of group policy for the policy you want to change.
ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#
Specify the policy to split tunnel. In this case, the policy is tunnelspecified.
ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified
Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.
ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List
Type this command:
ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes
Associate the group with the tunnel group policy
ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn
Leave the two configuration modes.
ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#
Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.
Kind regards
Abhishek Purohit
CCIE-S-35269 -
Can I access wifi via my iPhone 6 s cellular system? My husband Samsung cell phone can do that when no wifi system is obvious.
I need to change the above question. How can I connect Internet through my cell system if no wifi is available? Thank you.
-
I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook. The problem is, I can't get the MacBook to sync with iCloud. How can I do this? Help, please. Thank you.
What, in particular, looking to sync with the Mac iCloud? If you mean things like Contacts, calendars, Notes, etc., then you want to go in under the system preferences, click the iCloud and connect to iCloud there with your iCloud ID. Then select which items you want to sync'd via iCloud.
What - what are you trying to do?
See you soon,.
GB
-
Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?
In the Task Manager, click on "File" and select "new task (run).
Type explorer.exe, and then press the ENTER key.
If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.
-
'Bad Request' blackBerry smartphones can not access Hotmail via browser
Hello
I can't access hotmail via my Blackberry Curve browser... after the login screen. I get a blank screen with the mention 'bad Request' in the upper left corner.
can anyone suggest how can I fix?
Thank you
It is not you.
There has been changes. I don't really understand, but I have the same trouble of mobile platforms (passport and PlayBook).
Best I can suggest is play and find a method that works. For example, go to Bing.com and select Outlook. Connect to Microsoft and access email from here or try. Search the Hotmail from a search engine and look for a link of connection and try that.
If you find something that works, remember. I know I did, but I forget and understand each time.
-
Problem of peripheral access NAS via the VPN Site to Site
Hi all
I am facing a strange problem with a client. I use a VPN from Site to Site between two ASA 5505 to connect its network to ours to replikate between a NAS on his side and a NAS on our side. I use the same configuration with other guests and it works fine.
With this client, while I am able to ping the remote NAS and I have problems using SMB to connect via ssh (it works _sometimes_ but most of the time to access files via eplorer results in a timeout) and join the NAS Web portal (http and https, with https I can see the remote certificate of the SIN but the page does not load). These problems occur on both sides (our network-> NAS, customer network-> our NAS client)
I can access the NAS even without any problems other customers. ASA newspaper I see no connection blocked or whatever it is when this happens and the tunnel seems to work fine otherwise.
Any ideas how to refine the problem here?
Thanks in advance
Tobias
It looks like you can run into problems with packets that are too big for your tunnel. Try to limit the size of TCP segment by putting the following on your ASA units:
sysopt connection tcpmss 1360
Most VPN tunnels are not going to have an MTU (Maximum Transmission Unit) less than 1400 bytes, so the above should clean things up.
-
Windows 7 unable to access XP via the snap-snap-in mmc
Hello gentlemen,
The question that I have met is "Insufficient permissions" which tent to access remotely via the MMC, the Task Scheduler. I came to the conclusion that there is a compatibility issue of cross that I am under Win 7 and tries to access an XP machine. I can access the Task Scheduler on Windows 7 machines without any problem, but the XP machines give me an insufficient permissions error. I have the possible right plu admin for my domain, I excluded insufficient permissions and concluded with cross incompatibility.Someone has encountered this same problem and/or found a fix for this. Thank you in advance!Hi Alex,
I would have you post your query in the TechNet forums because it caters to an audience of it professionals. Your question would be more out there.
Check out the link-
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
Back to us for any issues related to Windows in the future. We will be happy to help you.
-
Store Windows 8 - I can see the store and apps on it, but I can't access my account or download apps. Help!
When I click an app I want to download, there is no button 'install' on the page.
Then I tried to click on 'my account', 'my applications', 'my preferences', etc, and all I get is this point indirect image that turns on in perpetuity.
I tried the diagnostics as suggested on the community pages but got no where with it. What should I do?
Help!
Hi jojo
You would not believe what happened.
The problem got worse. Subsequently, the system refused to even give me a sign on another wifi network other than that I'm a.
I leave the matter for a few weeks before I turned on the laptop.
I showed that I needed the Microsoft updates, after which the laptop worked like nothing happened.
Its a mystery of technology that I will never understand.
Thanks for your help!
Cheng
-
I bought jointly, Priemer elements and Photoshop elements. I downloaded photoshop successfully. How can I get access to the
Download the Web page for the elements of Prime Minister?
Garyl21385743 what version of Premiere Elements you are wanting to download? You can download the latest versions of Premiere Elements to products download Premiere Elements | 10, 11, 12, 13. You can also find links to the installation files for most retail securities of Adobe Creative Software to to other downloads.
-
Hello
I upgraded from CS3 to CS5 in December 2013. I have the original disks for CS3, but the upgrade was via a download. I need to reload windows on my PC and Photoshop. Can someone tell me how to download it again?
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
-
I am running Firefox 29.0.1 in a Windows operating system. Until a few days ago, the grey arrow (green when downloading) has worked, place a menu that showed the recent downloads and allowed me to access it. Now I find that I can't do this. I would prefer to use the native button 'Download', but am open to suggestions, if this is not possible.
You can check the problems caused by a corrupt localstore.rdf file.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
Unable to access company LAN via VPN
Hello
I have an ASA 5505 that I used to test run them the IPSec VPN connection after having studied the different configs and crossing the ASDM I get the same question that I can not receive any traffic.
The company LAN is on a 10.8.0.0 255.255.0.0 network, I placed the VPN clients in 192.168.10.0 255.255.255.0 network, 192 clients may not speak on the 10.8 network.
On the Cisco VPN client, I see a lot of packets sent but no receipt.
I think it could be to do with NAT, but the examples I've seen I think it should work.
I have attached the complete running-config, I might well have missed something.
Thanks a lot for all the help on this...
FWBKH (config) # show running-config
: Saved
:
ASA Version 8.2 (2)
!
hostname FWBKH
test.local domain name
activate the encrypted password of XXXXXXXXXXXXXXX
passwd encrypted XXXXXXXXXXXXXXXX
names of
name 9.9.9.9 zscaler-uk-network
name 10.8.50.0 Interior-network-it
Interior-nameservers 10.8.112.0
name 17.7.9.10 fwbkh-output
name 10.8.127.200 fwbkh - in
name 192.168.10.0 bkh-vpn-pool
!
interface Vlan1
nameif inside
security-level 100
IP fwbkh 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP fwbkh-out 255.255.255.248
!
interface Vlan3
nameif vpn
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Ethernet0/0
!
interface Ethernet0/1
switchport access vlan 2
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
Shutdown
!
banner intruder connection will be shot, survivors will be prosecuted!
Banner motd intruder will be Shot, survivors will be prosecuted!
banner intruder asdm will be Shot, survivors will be prosecuted!
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
test.local domain name
DM_INLINE_TCP_2 tcp service object-group
port-object eq www
EQ object of the https port
DM_INLINE_UDP_1 udp service object-group
port-object eq 4500
port-object eq isakmp
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-protocol udp
inside_access_in list extended access permitted tcp 10.8.0.0 255.255.0.0 any object-group DM_INLINE_TCP_2 journal of inactive warnings
inside_access_in list allowed extended access computer-network-inside ip 255.255.255.0 any idle state
inside_access_in list extended access permitted tcp 10.8.0.0 255.255.0.0 host zscaler-uk-network eq www
inside_access_in list extended access allowed inside-servers ip 255.255.255.0 log warnings
list of access USER-ACL extended permitted tcp 10.8.0.0 255.255.0.0 any eq www
list of access USER-ACL extended permitted tcp 10.8.0.0 255.255.0.0 any https eq
outside_nat0_outbound list allowed extended access bkh-vpn-pool ip 255.255.255.0 10.8.0.0 255.255.0.0
outside_access_in list extended access permit udp any host fwbkh-out object-group DM_INLINE_UDP_1 errors in the inactive log
inside_nat0_outbound list extended access allowed object-group DM_INLINE_PROTOCOL_1 10.8.0.0 255.255.0.0 any
inside_nat0_outbound_1 to access extended list ip 10.8.0.0 allow 255.255.0.0 255.255.255.0 bkh-vpn-pool
UK-VPN-USERS_splitTunnel of the access list extended ip 10.8.0.0 allow 255.255.0.0 255.255.255.0 bkh-vpn-pool
UK-VPN-USERS_splitTunnel to the list of allowed extensive access inside-servers 255.255.255.0 bkh-vpn-pool ip 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 VPN
mask UK-VPN-POOL 192.168.10.10 - 192.168.10.60 255.255.255.0 IP local pool
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global (inside) 1 interface
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound_1
NAT (inside) 1 10.8.0.0 255.255.0.0 dns
NAT (0 outside_nat0_outbound list of outdoor outdoor access)
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 17.7.9.10 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 10.8.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint BKHFW
registration auto
name of the object CN = FWBKH
Configure CRL
encryption BKHFW ca certificate chain
certificate fc968750
308201dd a0030201 30820146 020204fc 96875030 0d06092a 864886f7 0d 010105
310e300c b 05003033 06035504 03130546 57424, 48 3121301f 06092 has 86 4886f70d
ccc6f3cb 977029d 5 df42515f d35c0d96 798350bf 7472725c fb8cd64d 514dc9cb
7f05ffb9 b3336388 d55576cc a3d308e1 88e14c1e 8bcb13e5 c58225ff 67144c 53 f2
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.8.0.0 255.255.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
strategy of UK-VPN-USERS group internal
UK-VPN-USERS group policy attributes
value of 10.8.112.1 DNS server 10.8.112.2
Protocol-tunnel-VPN IPSec svc
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value UK-VPN-USERS_splitTunnel
test.local value by default-field
the address value UK-VPN-POOL pools
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol webvpn
username admin encrypted XXXXXXXXXXXXXXXXX privilege 15 password
karl encrypted XXXXXXXXXXXXXXX privilege 15 password username
type tunnel-group UK-VPN-USERS remote access
attributes global-tunnel-group UK-VPN-USERS
Address UK-VPN-POOL-pool
Group Policy - by default-UK-VPN-USERS
tunnel-group USERS of the UK VPN-ipsec-attributes
pre-shared key *.
type tunnel-group IT - VPN remote access
General attributes of IT - VPN Tunnel-group
Address UK-VPN-POOL-pool
Group Policy - by default-UK-VPN-USERS
tunnel-group IT - VPN ipsec-attributes
pre-shared key *.
!
ALLOW-USER-CLASS of the class-map
corresponds to the USER-ACL access list
type of class-card inspect all http ALLOW-URL-CLASS match
match without the regex ZSGATEWAY ALLOW request headers
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
type of policy-card inspect http ALLOW-URL-POLICY
parameters
ALLOW-URL-class
drop connection
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
Review the ip options
Policy-map ALLOW-USER-URL-POLICY
ALLOW-USER-class
inspect the http
!
global service-policy global_policy
USER-URL-POLICY-ALLOW service-policy inside interface
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:00725d3158adc23e6a2664addb24fce1
: end
Hi Karl,
Please, make the following changes:
local IP VPN_POOL_UK_USERS 192.168.254.1 pool - 192.168.254.254
access extensive list 10.8.0.0 ip inside_nat0_outbound_1 255.255.0.0 allow 192.168.254.0 255.255.255.0
!
no nat (0 outside_nat0_outbound list of outdoor outdoor access)
!
UK-VPN-USERS_SPLIT of the allowed access list 10.8.0.0 255.255.0.0
!
UK-VPN-USERS group policy attributes
Split-tunnel-network-list value UK-VPN-USERS_SPLIT
!
No UK-VPN-USERS_splitTunnel scope 10.8.0.0 ip access list do not allow 255.255.0.0 255.255.255.0 bkh-vpn-pool
No list of UK-VPN-USERS_splitTunnel extended access not allowed inside-servers 255.255.255.0 bkh-vpn-pool ip 255.255.255.0
!
inside_access_in to access extended list ip 10.8.0.0 allow 255.255.255.0 192.168.254.0 255.255.255.0
!
management-access inside
******'
As you can see, I have create a new pool, since you already have an interface in the 192.168.10.0/24 network, which affects VPN clients.
Once you have finished, connect the client and try:
Ping 10.8.127.200
It work?
Try to ping so another internal IP.
Let me know how it goes.
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
-
Can not access internet via wireless HTTP 404
I plugged a wireless (NetGear) adapter to my PC to be able to access the internet via the card my husband Verizon Wireless. He says that I'm connected to the internet, but the only thing I get when I try to connect to any site is error 404 web page not found. It's probably something simple, I need to set up on my desktop, but I can't find a way to solve this problem.
Thank you... I actually got a response via Widgetbox.com yesterday. I had to go to the workstation, Panel, network and Internet Options, Internet connections, connections and go to LAN settings and uncheck all checked it (the checked was something to do with a proxy server). And that's all that it was him - everything has worked correctly! Hope this helps someone else.
-
VPN to access LAN VPN clinet.
We use a PIX 515 as the hub of a LAN to LAN VPN as well as to access VPN Clinet. Using a multipoint configuration sites speaks (all PIX 501) are able to communicate with each other. However, the VPN to access the 515 client are not able to access the VPN sites has talked about. I think that it is due to the fact that put an end to all tunnels on the same interface of the PIX 515. Is there a way to allow the VPN CLient to communicate with the LAN VPN spoke?
Concerning
PD
Currently, it is not a good way to meet the requirements above. However, add us a new item (or rather, a restriction of relax) for the PIX 7.0 code (to be released in December/January) to allow clients VPN packets 'u-turn' on a Hub PIX to PIX spoke connected via Lan-to-Lan tunnels. The program 7.0 beta is about to begin (may have just begun) so if interested, please contact your local account engineer Cisco. Sorry for the news but help is on the way.
Scott
Maybe you are looking for
-
Remove "blocklist.xml" impossible to find a new one?
I deleted firefox blocklist.xml to solve a problem, I expect Firefox to renew when I start the browser again, but I can not find
-
Stop the Firefox autocompleting file location?
When I enter the URL of a certain site Web NSFW bar addresses, or just part of it, Firefox with two locations of files autocompletes embarrassing. They take the following form: file:///C:/users/[username]/downloads/[embarrassing filename] #_tabcommen
-
OSX 10.5 Leopard installation problem
I tried to install OS x 10.5 Leopard on a new HDD in my door mirror, Power PC and OSX 10.5 Leopard installation disc is stuck in the installation screen, with the motionless progress bar and under saying "time remaining: calculating...» "on a new WD
-
My laptop runs two miles from my house?
I need to use my computer laptop about 2 miles from the House next week.Will it work? What should I do if it won't. Thank you.
-
How can I change the details of my backup email address in my account if I'm not able to access my mail for rescue or hold the answers to secret questions?