No Broadcom WiFi when I installed xp pro

Similar Questions

• Message 'do not use configuration cartridges' when you install Officejet Pro 8600

  Just try to put in place a new and installed Officejet Pro 8600 cartridges that were in the area, but I just get a message on th ediplay that says 'do not use cartridges setup - Y' and I can't move forward. I took them all out and put their return nothing done.

  Unable to find a referenct to this error message on HP or google... Help!

  I didn't not round up to try this alread has called support. I just replaced the yellow cartridge Setup with an ordinary and that solved the problem. HP is sending me a replacement yellow so all sorted thanks.

• Error 1603 when you install Acrobat Pro XI - no luck with suggestions

  Hi all - I tried to download Acrobat Pro XI through the installer of creative cloud, but I get the following message is displayed:

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message:

  ERROR: installer of third party AcroPro.msi payload failed with exit code: 1603

  I managed to install Photoshop and InDesign in the same way.  I tried the following suggestions from the community:

  Empty the Temp folder

  Re-register msiexec

  Tool to uninstall/cleanup/reinstall

  He arrived at about 42% and fails each time. Any ideas?

  Thank you very much!

  Thanks, Ned.  I had already tried these suggestions.  Our finally sorted IT Ops Manager this out by running the installation program manually, rather than by the installer of creative cloud.  It was 'Adobe PDF creation add-on 11.0.01', which was not removed via the cleaning tool.

• Why the creative cloud cannot install first pro

  I installed the creative cloud and I registered.

  I installed lightroom and it works but when I install Premiere Pro it shows that it is installed, but when he did only said "up-to-date" and there is no "open" button.

  Hello Joachim,.

  The creative cloud desktop application download and install applications in the Applications folder. Use the Finder to navigate to the Applications folder and double-click the Prime Minister pro icon to launch the application.

  Please see the apps to launch Adobe Creative Cloud

  Also, make sure that you meet the minimum requirements of the Premiere Pro system requirements for Mac OS and Windows system

  It could be useful!

  Rayyan

• MacBook Pro wifi hardware not installed after update of El Capitan

  Hello

  I connected my macbook this morning to find that I had a gray wifi symbol with an x through it saying ' wifi: no hardware installed '. I'm taking in the Apple Store to be looked at in a few days, but only I was wondering if anyone in this community has experienced a similar issue that has an easy solution so that I can return to the top and run. It worked all fine until this morning.

  Ive updated to El Capitan - 10.11.1

  I have a Macbook Pro 13 inch retina end 2012

  Thanks in advance

  This means that the two Wi - Fi drivers are damaged or that your wireless card has stopped working.

  A good way to find out what the problem is to start up in OS X Recovery in now pressed the command keys so much R during start up your Mac to the top. Once your Mac is turned on, look at the Wi - Fi icon in the upper right and see if you can choose any Wi - Fi network. If so, reinstall OS X.

  However, if you can not choose any network, it is probably a hardware problem, so you have to take your Mac to an Apple Retail Store or dealer to get the Wi - Fi card replaced.

• I recently installed PowerDesk Pro v7.0.1.3 and now, the system hangs when you right click to copy a folder, etc.

  Original title: Windows Explorer has stopped working

  My computer is running XP Home Edition Sp3 and using Norton internet security 2011. I recently installed PowerDesk Pro v7.0.1.3and now, the system crashes when you right-click to copy a folder, etc. I read on this forum of a person having a similair problem and being referred to this site offering a patch that seems to not be available:

  http://KB.avanquestusa.com/Al/12/1/article.aspx?Aid=4030&Tab=Search&BT=4&r=

  Marilyn answers Support Engineer Microsoft's answer also suggested maybe using some registry changes, which I'm not comfortable with because of my limited experience.

  Any suggestion would be greatly appreciated pedro147

  None of these suggestions to the Microsoft support technician will help you, but they will consume large amounts of your time.

  Please post a link to this Marilyn Microsoft engineer answer Support responses involving some registry maybe going to I can see that too.

  Older versions of PowerDesk Pro 7.x are known to cause explore crash, so that the sounds on the right.

  The current version of PowerDesk Pro is 8.5.

  You might be able to get the old version to behave by disabling PowerDesk one shell extensions at a time until when you right-click Explorer no longer crashes.  This will leave you with limited functionality of PowerDesk since those afflicted extensions will be disabled, but you should not have these extensions to do anything, you need to make sheets.

  I would start with the PowerDesk ZIP shell extension (I already know about this one).

  It is a version shortened and changed my notes on the use of ShellExView (since you already think sheets):

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

  For example, you could Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  Right click and disable Microsoft no suspicious extensions one at a time take a list so you can enable them again later if you wish.

  The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know which extension is the culprit, then you can start to enable them one by one until the Explorer fails again.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.  You can then start to reactivate other extensions to zero on the extensions that are causing your accident

  If the cause of the accident is a third party application or program, their may be a later version of the program available that solves the problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• I get the error to access the problem when installing QuickBooks Pro fonts

  WHY do I receive THE MESSAGE (THERE WAS a PROBLEM ACCESSING the FONTS0 WHEN I TRY to INSTALL QUICKBOOKS PRO

  Hello

  Try these steps and see if that helps.

  a. right click on the shortcut icon on the desktop of QuickBooks, and then select Properties.
  b. click on the Compatibility tab.
  c. Select run this program in compatibility mode for and select Windows XP (Service Pack 2) from the list.
  d. Select run this program as an administrator, and then click OK to save the changes.
  e. open the configuration file.

  If the problem persists, please post your question on the forums for assistance from intuit.
  http://community.Intuit.com/QuickBooks?14@@.ef91d88/6

• I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do?

  Hello

  I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do? It is an Acer Aspire 5920 G (old enough)

  Thank you.

  There could be a problem with the wifi driver that comes with Windows 10. I think that you first need to find the right driver for Windows 10 on the Acer site. Otherwise, you may need to install a usb wireless card.

  Thanks for reading.

• Error 1935 when installing Acrobat Pro XI

  Hello. I get the following error when trying to install Acrobat Pro XI:

  Adobe Acrobat Pro XI (11.0.17)

  Error 1935. An error occurred during the installation of assembly component

  {9718BF1D-6A9F-3406-A992-630F7EF2F164}

  HRESULT: 0 X 80070308

  This happens within our company on all machines. Initially, I tried with 11.0.16 and now with the latest patch. It worked for years until the beginning of this week and now he failed at least 50 machines. Also, on some machines I've known, worked previously, was installed a version of Acrobat Pro (updated 13) suddenly is no longer. My guess is Symantec (they broke Firefox over the weekend) or a patch from Microsoft, although no patches were released over the weekend in our environment. Everyone knows this?

  Figured it out! There is a MS update stuck there. I followed the advice here and it has cleared up.

  I tried to reinstall the original Visual C++ files and they with a similar error. In the text search, I came across the site I linked above.

  Thank you very much for the help.

• I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect m

  I have Acrobat Pro 10, when I installed the CD player, it has affected the way I was able to move text boxes when I create a form of gall, he has also affected my ability to release and change the properties of the fields /, I'm I suspect my off lucky cat Adobe support will not help , nor a cure to.  Is there a place to find updates to Acrobat 10, if I uninstall my current program?  I still have my original CD and paperwork.  Adobe acknowledge that they have created this problem.   I worked very intensively with Acrobat Pro 10 on the form for a non-profit, I do part, and it happened immediately after that I was testing a form I created in Acrobat 10 to test with CD player. Windows 7 operating system

  This is usually due to the function 'Snap to Grid' is enabled. It can be accidentally activated via the keyboard, so this may have been what happened.

• After an update the operation of my account PRO to Acrobat DC disappeared and it works as if it were a FREE standard version. So I disinstalled it and tried to install it but when I install the Setup program fails. So I'm not able to install it more. What

  After an update the operation of my account PRO to Acrobat DC disappeared and it works as if it were a FREE standard version. So I disinstalled it and tried to install it but when I install the Setup program fails. So I'm not able to install it more. What can I do?

  When I opened my creative cloud I see nothing!

  Please see these troubleshooting FAQ:

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  FAQ: What should I do if I get a blank white screen, spinning wheel, or my CC application does not open?

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

• I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there is no dc pro acrobat installs

  I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there no acrobat pro CD is installed.

  Hi Pavle,

  The installer for Acrobat is different from the rest Cloud Creative applications that is why when you create a package by using Creative Cloud Packager, there are two folders created:-

  (1) build-->> all upward for all Applications of Cloud Creative except Acrobat.

  (2) exceptions-->> Contains for Acrobat and the Muse.

  You will need to install Acrobat first through the Exceptions folder. Select the option to install as a trial or a subscription.

  Then install the creative rest of Cloud applications through generation file, it will install the applications and your copy of Acrobat license also.

  I hope this helps!

  Thank you

  Tanvi

• Exit code 7 and error 1603 when trying to install acrobat pro DC.

  Exit code 7 and error 1603 when trying to install acrobat pro DC. What's wrong? I run windows 7.

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

  Error 1603. Install | CS5 products: http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html

• When I install acrobat adobe PRO XI, it converts everything on my computer to an adobe icon, and when I try to open it, it will open adobe acrobat. For example, I can not open word, excel, internet explore or any other document or program because he think

  When I install acrobat adobe PRO XI, it converts everything on my computer to an adobe icon, and when I try to open it, it will open adobe acrobat. For example, I can not open word, excel, internet explore or any other document or program because he thinks his acrobat.

  Hi Kate,.

  Please see this KB document for the solution Application, file icons change in Acrobat/Reader icon

  Let me know if the problem persists.

  Kind regards

  Nicos

• I buy Adobe Acrobat XI pro and when I install in french and I'm trying to enter my serial number I got an error saying that your serial key is for English do you have a solution?

  I buy Adobe Acrobat XI pro and when I install in french and I'm trying to enter my serial number I got an error saying that your serial key is for English do you have a solution?

  Hi Steve,.

  Try to download Acrobat referring to the following link.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

  Concerning

  Sukrit diallo