No carrots to the CPU socket

Similar Questions

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• Is the CPU socket socket 478 and 479 on Satellite 1110

  Does anyone know if the celeron processor in a 478 socket or 479?

  Thank you very much

  Everything I found on the CPU are these information:
  The Intel Celeron processor
  -Speed: 1.8 GHz
  The processor bus speed: 400 MHz
  Integrated memory cache L1: 12KB
  Memory integrated L2 cache: 256 KB

  In addition the 1110 series computer is equipped with a controller of Intel 845MZ system; Intel ICH3-m for PCI to LPC Bridge, PCI IDE controller and the logic of power management;
  NS87591 for keyboard/controller, battery unit and RTC management; OZ6933 for
  PCMCIA Card Bus controller; ATiM6-C for VGA controller; ALC202 for AC97
  CODEC; FDC47N227 for super i/o controller.

  For me, everything looks like a CPU with a socket 478

• What is my cpu socket I have pavilion g7 with processor A8

  I want to improve my g7 cpu pavilion. I have an A8 and want to get an A10. I need to know if I have the right socket for the cpu. I can't know what I have. I would also like to know how much more I can use if I have 6 GB, but I don't know if you can put more in it, and if I can how much is the max of ram. Hope someone out there can help me out! Thanx

  Hello

  It seems that the number of good product is B5Z52UA. With the numbers you gave me, I was able to find the following:

  (first you can find the manual for your laptop on http://office.manualsonline.com/manuals/mfg/hewlettpackard_1/b5z52ua.html?p=84 )

  the cpu-socket supports the following processor A10:

  Processor AMD A10 - 4600M (3.2 GHz/2.3 GHz, MB L2 cache, DDR3 1 600 MHz/4,0 hearts,

• Dell Inspiron 580 CPU Socket type?

  Hello

  I have a dell inspiron 580 and I want to upgrade the CPU intel core i5 intel core i3. But first, I need to know what is the CPU socket type, so I know which one to buy. I tried to find it on google but I could not. Is that h2 lga 1155 and 1156 or lga h or h57?

  Also, if you have any recommendations for i5 processors and then respond!

  Thank you

  Hi malick4132,

  Dell has tested Inspiron 580 with the following processors without any problem:

  1. Intel Pentium G6950
  2. Intel Core i3 - 530, 540
  3. Intel Core i5 - 750, 650

  Your computer comes with Mobile Intel H57 Express Chipset. For more information, refer to link: http://intel.ly/XJYkuG

  Click the compatible products for a list of processors that are compatible with your computer. Most of them supported the LGA1156 socket or FCLGA1156. Both are almost similar. Please check that you update the system BIOS before you upgrade the processor on the computer.

  Dell does not recommend nor upgraded the processor, but it's like your discretion if you really want to go ahead with it. Warranty by saying that the issues raised as a result of the upgrade is not covered by the warranty, but we will continue to support for other issues and parts.

  Answer please for more details.

• Have the doubt by assigning CPU socket and carrots.

  Hi all

  Recently, I saw a Windows server 2008 R2 in my environment to have 4 taken with 4 each (average 16 Cpu core).

  I can also see them in windows host device manager. Now I am confused as the support for Server 2008 R2 STD up to 4 CPU only version.

  They will work with it. or there will be changes in the physical or virtual processor architecture and not taken care of the windows processor.

  If I missed something here. Please let me know.

  Attaching screenshot.

  Thank you

  Anjani Kumar

  Windows Server 2008 R2 can have up to 4 CPU sockets, each of these jacks may have multiple cores on them

  http://msdn.Microsoft.com/en-us/library/ms143760%28V=SQL.105%29.aspx

  Windows Server - Sockets, logical processors, Symmetric Multi Threading - Matthijs - Site Home - TechNet Blogs blog

• configuration of the cpu reviews

  I want to learn that. What is the difference between

  number of virtual sockets: 2

  number of cores per socket: 8

  total number of cores: 16

  and

  number of virtual sockets: 1

  number of cores by sockets: 16

  total number of cores: 16

  Yes performans, design. good, bad etc...

  Well both will give you 16 CPU in the Task Manager.  There is no real gain in performance.  However, in a perspective of license you have only a single CPU so you can save costs, in situations where a program is licensed by the CPU and no carrots.

• Can I change the CPU and the GPU on my Satellite L500-210?

  Can I change the CPU and the GPU on my Satellite L500-210? If so, what is compatible?

  Memory DDR3 2 x 2024 (4096 MB)
  Chipset GM45
  BIOS 2.10 05/06/2010
  Socket P (478 pin FC - PGA microphone)
  currently INTEL DUAL - CORE T4500 2x2.3 GHz x 64
  GPU: Ati Radeon HD 4500 series 512 MB

  I can put a CORE 2 QUAD for example 9000 / 9100 / 9200?

  Before starting to discuss this review, please http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm at first.

• HP ProBook 4330 s - replace the CPU

  Hello!

  If someone could explain, is it possible replace cpu on 4330 s of i3 to i5?

  THX!

  Asproot.

  The i3 socket you have is PPGA988 or FCBGA1023.

  You can upgrade to an i5 or i7.

  Specifications for the i7 here.

  http://Ark.Intel.com/products/52231/Intel-Core-I7-2620M-processor-4m-cache-up-to-3_40-GHz?q=2620M

  Sockets supported

  FCBGA1023, PPGA988

  Specifications for the i5 here.

  http://Ark.Intel.com/products/50072/Intel-Core-i5-2540M-processor-3M-cache-up-to-3_30-GHz

  Sockets supported

  FCBGA1023, PPGA988

  Specifications for the i3 here.

  http://Ark.Intel.com/products/53438/Intel-Core-i3-2350M-processor-3M-cache-2_30-GHz?q=2350M

  Sockets supported

  PPGA988

  Your manual here.

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5045444&docid=emr_na-c03054507&docLocale=en_US

  REO

• Simple Script Execution: Days and only using 15% of the CPU power

  Dear community,

  I have a data file (.tdm) with 17 channels of waveform point each containing 13742499 data. I want to delete all the data points that are not actual load points. I have build a canal ("LoadTrigger") that is a trigger for points of interest. With the following script, I tried to erase the im not interested datapoints:

  Dim RowCount

  Number of lines = 1 to GlobalChnLength

  ChnVal if (RowCount, "/ LoadTrigger") = 0 THEN

  Call the DataBLDel ("1-17 ', RowCount, 1" ")

  End If

  Next

  The script is now running for more than 20 hours with no result. Can someone please tell me if I am wrong in my script, or if there is a way to make it faster?

  In addition, I wonder why DIADEM uses no more than my cpu power? As you can see in the photo attached DIADEM mainly use a carrot and never more than 15% of the CPU.

  

  Best regards and hoping answers of construcitve!

  If you try to delete rows based on conditions, you can use code like this:

  Option Explicit
  
  CreateExample
  
  "Make sure that the correct group is active.
  
  data. Root.ChannelGroups (1). Activate
  
  ' chncalculate allows you to set values that match a NOVALUE condition
  
  Call chncalculate ("Ch (1) = Ch (1) + CTNV (0 = Ch (1))")
  
  'Delete the lines that contain a NOVALUE in channels '.
  
  Call ChnNovHandle ("[1] / [1]", "" [1] / [2]'-' [1] / [3]'","Delete","XY", 1,0, 0)
  Sub CreateExample()
  
    data. Root.Clear
  
    Dim g: g = given game. Root.ChannelGroups.Add ("group")
  
    Dim c1: set c1 = g.Channels.Add ("c1", DataTypeFloat64)
  
    Dim c2: set c2 = g.Channels.Add ("c2", DataTypeFloat64)
  
    Dim c3: set c3 = g.Channels.Add ("c3", DataTypeFloat64)
  
    I have Sun: for i = 1 to 100
  
      C1 (i) = I mod 2
  
      C2 (i) = I have
  
      C3 (i) = i * 0.00001
  
    Next
  
  EndSub

  that will remove all lines that contain a 0 in the first round.

  

  will be converted to

  

• Compaq Presario CQ61-313US: replacement of the CPU Compaq Presario CQ61-313US

  I have a laptop Compaq Presario CQ61-313US VM367UA #ABA that I am refurbishing and it must have replaced CPU. It comes stock with a CPU AMD Anthlon II M300 and I wonder if I can replace it with a CPU AMD Anthlon II M340 since they are the two socket S1, 35W TDP and they were released at the same time, so I think that the firmware should support two processors. I build that several desktop computers and laptops repaired but I traded not portable CPU oout before any info would be appreciated.

  I would say that you were right, because I have worked with several CQ61 CQ61 - 415st comes with this CPU.

• Windows XP - Explorer runs constantly - could not delete Explorer. The CPU runs at around 70%, constantly.

  Computer is very slow. Repeatdly scanned for malware, Trojans and other horses. Now clean, but Internet Explorer works constantly, occupy the CPU at 70-100%. Tried to remove Internet Explorer. Cannot remove. Still works very slow computer socket. In addition, cannot defragment.

  Thanks for trying to answer.  I used Norton scan. Not sure, malicious software, but the system is now clean. The Explorer is still running the CPU at @ 70%. With nothing else open but the Manager of the tasks, the CPU still works. I thought that if I deleted the program explore it would interrupt the CPU of the race. The processor is running, and make the unit run very slowly.   Jay

  I'm still not, Jay.
  What do you mean by "delete"? Files can be deleted. But programs must usually be uninstalled, which is a different process.
  Also, you seem to be confusing the following three terms:
  Windows Explorer (which, as Brandon2003 pointed out) allows you to navigate your file system. When you open a folder (such as My Documents), you use Windows Explorer. In the Task Manager, it appears as explorer.exe.
  Internet Explorer allows you to surf on Web pages. In the Task Manager, it appears as iexplore.exe (and probably several instances of what appears there).
  The Explorer - I don't really know what it is!
  Both Windows Explorer and Internet Explorer are part of Windows XP. And even if you wanted to delete either, it would be impossible! Of course, you can choose to run an another browser like Firefox, Opera, Chrome, etc instead.
  I'm positive, that you still have malware.
  Certainly, you must run aswMBR:

  http://public.avast.com/~Gmerek/aswMBR.htm

  You must also perform scans with free versions of Scanner Portable SAS and MBAM.

  For the SAS portable scanner:

  http://www.SUPERAntiSpyware.com/portablescanner.html

  For the of MBAM FREE version (not the pro or trial version! scroll until you get to see the link to download the FREE version!):

  http://www.Malwarebytes.org/products/malwarebytes_free

• notherboard and cpu socket

  I have a question they don't match?

  1. This motherboard, you know what cpu socket?

  • HP Compaq Presario CQ57 motherboard
  • Part # 646177-001

  2 Cpu.

  • Quad Core CPU, 4 Ghz Max Turbo
  • Unlocked image processor
  • Socket FM2
  • TDP: 100W
  • AMD Turbo Core 3.0

  Thank you.

  Here are some processors

  1 (Intel Core i3-2120 Dual - Core Processor 3.3 GHz 3 MB Cache LGA 1155 - BX80623I32120

  • Type of process: Intel Core i3 Processor i3-2120 frequency: 3,3 GHz DMI: 5 GT/s
  • Intel Smart Cache: 3 MB process: 32nm Socket: LGA1155
  • Power: 65 W Max bandwidth: 21 GB/s graph Base frequency: 850 MHz
  • Frequency of Max Dynamic Graphics: 1.1 GHz, this processor is a Dual Core Processor
  • This processor supports technology Hyper - Threading Technology this processor supports Intel Virtualization Technology (VT - x). Has 2 cores, 4 threads).

  2 (Intel Core i5 - 2500K Quad - Core 3.3 GHz 6 MB Cache LGA 1155 Processor - BX80623I52500K

  • Data sheet: Quad-core 3.3 GHz, 6 MB Cache, Intel HD Graphics 3000, 95 watt TDP, double memory support channel DDR3, socket LGA1155
  • Quad-core processor offers four-lane treatment multicore via parallelism resulting in better use of the processor
  • Enhanced Intel SpeedStep Technology is a plea for very high performance while also shipping-energy saving.
  • 6 MB Intel Smart Cache shared dynamically to each processor core, based on the workload
  • All Core i5 processors have the Intel Turbo Boost technology

  3 (Intel Core 2 Duo processor E8500 3.16 GHz 1333 MHz 6 MB LGA775 CPU, OEM

  • NPP: EU80570PJ0876M; AT80570PJ0876M

  4 (AMD Phenom II X 4 965 AM3 3.4 Ghz 512 125W 45NM 4000 MHZ)

  • Second generation AMD Phenom II processors have a refined architecture
  • technology 45nm for the height of maximum performance
  • The last C3 walk for better stability and electric; now able to run the 1600 and 1800 DDR3

  IM new to these

  When you request support, please provide the model name and product number full (pn) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  (1) HP p/n 646177-001 - for use only with the computer models equipped with a 35watts 2nd Gen Intel Core i5 or i3 processor and a graphics subsystem with UMA graphics memory

  (2) 100W FM2 AMD PROCESSOR

  Not even close.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Area 51 - R2, CPU socket LGA 2011 version 3?

  Hello, is the area 51 - R2 CPU socket LGA 2011 version 3?

  Fix.

• The CPU suddenly very high low host CPU

  Hi all

  I was struggling with a particular host for awhile and am unable to access the root of the cause. What we have so far:

  Physics:

  1 host, 2 quadcores with HT technology (total 8 cores, 16 logic due to HT), 24 GB of ram

  HP Proliant DL380 G6

  Virtual:

  1 x Windows 2008R2 DC/FS 2vcpu

  1 x Windows 2008R2 SQL 4vcpu

  1 x Windows 2008R2 Exchange 2010 1vcpu

  1 x Windows 2012R2 RDS currently 8vcpu

  Recently, the old 2008R2 RDS has been replaced by the new 2012R2 RDS. This went well, nothing special, no complaints, that rent because it was quite a bit of snappyier than the last.

  Then, (and I did not understand what happened yet, could have been power failure) after about a week the Esxi host froze and we had to restart. Servers began and everything was fine, until the problems started.

  The 2012R2 virtual machine currently maxing out at 100% cpu usage in Windows Task Manager, between all the virtual cores. This can be achieved by something as simple as the launch of chrome and Outlook at the same time. Performance on this virtual machine is terrible. All other virtual machines are affected also, extremely high CPU usage in Windows, maxing out even with simple tasks. If I open vSphere and check the CPU usage, it's nowhere near capacity. The RDS virtual machine did not exceed 3000 mhz maximum.

  What we have tried so far:

  -Reboot the host

  -Restart the virtual machine

  -The power management has changed compared to the High Performance HP OS Control setting, and the powersetting to high performance in vsphere. I can see through esxtop that all hearts are at c0 permanently. (Could not verify this before because of ILO2 failing to display this when HP high performance mode is activated)

  -J' tried all sorts of Vcpu assignments, until 1 vcpu/1core 8 sockets on the 2012RDS. There is no pool of resources, there is no reserves (I tried those who, unfortunately, no effect)

  -Close all VM except one (to check if there is some sort of contention cpu), always the same.

  I think something is gone belly up when the host rebooted, simply unable to understand why, and apart from the crazy CPU usage, the server running now stable.

  Any input is greatly appreciated.

  21:03:46 until 01:52, 344 worlds, 4 VMS, vCPUs 15; CPU load average: 0.19, 0.26, 0.22

  PCPU USED (%): 2.6 2.5 2.5 3.0 4.1 2.1 2.7 1.9 2.9 5.7 2.2 2.4 1.9 1.7 2.3 2.4 AVG: 2.7

  PCPU UTIL (%): 19 19 19 21 28 18 20 16 17 28 16 16 13 14 14 16 AVG: 19

  UTIL (%) BASE: 33 35 40 31 40 27 23 26 AVG: 32

  ID NAME NWLD % USED GID % PERFORMANCE SYS % WAITING % VMWAIT % % IDLE % OVRLP % % MLMTD % SWPWT CSTP RDY

  3785 3785 XXXXX 14 24.00 153,48 0.13 1243,64 11.57 2.75 633.36 0.81 0.00 0.00 0.00

  10167 10167 XXXX01 10 6.87 54,83 0.11 944,21 3.31 341.84 0.95 0.21 0.00 0.00 0.00

  3361 3361 XXXXX01 7 3.21 13.37 0.05 686,25 0.23 87.04 0.35 0.00 0.00 0.00 0.00

  3349 3349 XXXXe01 10 1.64 8,89 0.06 990,63 0.28 191.21 0.50 0.02 0.00 0.00 0.00

  This has been fixed!

  Have us shut completely the host, took off all power physically and reconnected. After that, CPU returned to normal. Upgrade to ESXi for good measure.

  Apparently restart with the ILO is not enough.