No change recorded by the installer

Similar Questions

• Button value change records in the structure of the event, but does not change appeaance?

  Hello world

  A quick question... I hope someone can answer...

  I have a code that uses a PS button within a structure of event to trigger a signal of AO... My code is below. The code works fine and the OD goes off when you press the button E-Stim... But when pushed the button does not change with reliability the appearance (i.e. of the gray 'off' red 'on' color)... Sometimes color changes; no other time not... If I remove the structure of the event and the survey button in the appearance changes as expected.

  What is going on? I would like the button to change the colors on the user interface to indicate that it works... Should I programmatically control the color?

  Kind regards

  Jack

  

  I guess that when query you the button you have some delay in your loop? Locking means that the button will change its value when you press it, then switch back to the original value once the value of the control has been used by the code. When you ask, this means that until he reaches the next iteration of the loop, but in the case where the structure that will happen immediately.

  The default setting for the buttons to modify its behavior as in most of the application would be latch releasing. You then raise the event when the button of the mouse over the control. This also allows "drag" control if you push down on the subject, given that you do not release control in this case.

• How to change endpoints in the installation of Proxy Agents

  Everyone

  When I installed the agent vSphere and the use of proxy as an endpoint.  Here, you can specify the name of the endpoint, well I need to change endpoint

  name.  What would this process?

  Thanks in advance!

  Easier to add a new one with a custom installation. Then delete the old if necessary.

  Grant

• Windows Media Player 11 has changed color after the installation of Windows updates.

  Original title: Windows Media Player 11 has changed color.

  Since the last update from Microsoft, the media player iteself blushed and the color picker that is not responding. She still plays the videos, but they also have a red color that doesn't change when I adjust the video settings. Does anyone know how I can fix it.

  I use Windows XP Professional with SP3 and my graphics card is a NVIDIA GeForce2 MX/MX 400.

  Hi DanielDavey,

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The installation fails after changing the position of my Docs

  Installation fails for Adobe Reader after you download it in the installer. Then starts the installation but says 'Error install Adobe Reader', in detail: "the path to the program Documents or volume are not valid. Insert them again". I was messing around with letters of partitions before that. Just changed my CD of E, then my second partition to D fix the creation of D for my CD. And position changed from MY Documents to the D drive as always.

  
  But I had a weird problem with libraries. They got removed, I tried to get back them and they do not appear. Then I clicked on them through start button, PICTURES, DOCUMENTS and all the quick links with Control Panel, and they appeared. I have fixed everything.

  Not when I try to view the file 'in the browser"with any program, I can't make it work either.

  How can I solve this?

  OK I fixed it.

  I created another account with administrative rights. Then I have everything copied from my last story (hopefully content office and more than two files) and removed the last account. The new account created new library records that have been broken before. EVERYHING work perfect.

  I guess that it s related to some Adobe stores data in the My Documents folders.

  Thank you!

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.

• How to change the installer to be able to install the program even as a new product?

  Hello! I created distributive for my project and installed. Now, I want to install this program with fiew changes in the code, but as a new product. But the new program replaces an old. How to change the settings for the installer to create a distribution that allows to install this program as a new product without updating the old program?

  Thank you.

  You need to duplicate the installer:

  

  As a result the new GUID is generated, and you will get a new product

  Andrey.

• What are the changes that the installation of BizTalk has on the SQL instance?

  Original title: BizTalk.

  Hello.

  I want to install BizTalk.
  BizTalk and SQL are different servers.
  I would like to know what are the changes that the installation of BizTalk on the SQL instance.
  Can anyone help?
  Thkz

  Hello

  I know it's late to answer this question, just in case someone else look through this issue.

  BizTalk installation does nothing to SQL Server, but make BizTalk Configuration. When configure us BizTalk on any SQL Server (same or different), it creates the required databases and SQL Server works on this server.

  Here is a series of articles on installing and configuring BizTalk Server: http://sandroaspbiztalkblog.wordpress.com/2013/05/16/biztalk-2013-installation-and-configuration-install-and-configure-biztalk-server-2013-part-9/

  Thank you!

• my computer guard reboot changes back several times after the installation of Service pack 2 on Vista.

  I tried to update my computer (Dell, Vista Home premium) with service pack 2 for Vista.
  But after completing the installation, there was an error when I tried to restart to complete update and work stoppage.
  So I restarted the computer and, instead of log on screen, the message [service pack was not installed recovery changes do not turn off your computer] appeared
  and then restart automatically.

  Now it's repeating this cycle for a day!... .the message - > restart-> message-> restart...
  What should I do? I can still start windows safe mode. (the same message...)
  I have lots of important files it contains so really want to reinstall Vista.
  Please help me...

  Hi arkitekromero,

  Given that repair options did not work for you.  I suggest you try the method below.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method. Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows. Use this method only after trying other methods. Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue. Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available. After using this method, the following conditions may exist until reinstalling Windows: An update is being installed may not be installed correctly. Windows Update may not work correctly. If an update is installed, you may be unable to stop the installation process. You may be unable to enable and disable certain Windows functions in option. Certain optional Windows features may not work correctly. The computer may be in an unprotected state. To rename the Pending.xml file, and edit the registry, follow these steps. Start Windows Vista and go to system recovery options: Insert the Windows Vista installation disc in the disc drive, and then restart the computer. When you are prompted to restart from the disc, press any key. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next. On the Install Windows page, click repair your computer. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next. Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My local disk drive letter changed from C to D after the installation of Windows XP.

  Help to install window Vista! PLEASE, I BEG YOU! Help!

  Hello!

  For some reason any Local disk under C and D after that I installed Window XP.

  I tried and tried to go back to C but I can't because he has this partition called reserved system, which is 100 MB and this partition has C

  But when I open the window Vista * this is not a CD is an ISO * it happens like that

  "The system (c) partition has insufficient free space. Windows installation needs at least 392 megabytes (MB) of space on this partition. "To install Windows, enough free space and restart the installation.

  Its evil!

  I don't know why its saying C

  My D drive * how window 7 was a c drive * had over 500 GB of free space

  My C drive * which is the reserved system * has about 62 MB on it?

  How can I install Windows vista! I NEED THE ANSWER OF TOMORROW!

  Hello

  Try to change the name of the partition through BACK:

  http://www.ehow.com/how_5969792_change-letters-outside-Windows-XP.html

  www.YouTube.com/watch?v=wmdFejeMyr8

  Hope it works.

  Thank you

  Nitin Aswani

• My hard drive is almost full. How can I change the destination of the installation of a Microsoft FixIt tool?

  MY MAIN (C:\) DISK IS ALMOST FULL.  I NEED TO INSTALL THE CENTER OF FIX-IT ON MY DRIVE (D:\).  HOW CAN I CHANGE THE INSTALLATION DIRECTORY?

  original title: MICROSOFT FIX - IT CENTER.  HOW CAN I INSTALL ON MY SECONDARY DRIVE (D;)

  You don't need to install it, just whenever you face a problem, then visit:

  http://support.Microsoft.com/FixIt/

  And run the tools that doesn't solve your problem.

  For your drive, you can run Disk Cleanup to free up space, if you have not already done.

• Windows XP - programs try to install on drive D instead of c. not giving prompt to change the installation drive.

  I try to run the installation on my new webcam and it tells me I don't have enough disk space, what is true on the D drive that should be reserved for the only programs of systems, my C drive where I want to install has over 140 GB of free space and my ram is 1.94 GB. During the installation it does not give me a prompt for what reader, I want the program must be installed. And I don't know how to change it to. C drive is where I want to this installer.

  Do not have to change anything in car cause C was there all ready. I then tried to open the program files on the C drive and it gives me this error "program files is not accessible access is denied" any ideas?

  Restart the computer in Safe Mode. See if you can access program files. If so, you probably some type of malware blocks your access and perhaps even changed your permissions.

• F2280 printer: printer F2280 driver - change the installation language

  On my old laptop, I got the software installed in English, because that's my working language.  Now I have a new laptop, I downloaded a new set of drivers from the HP site and the software is in French, probably because I live in Belgium.  How can I change the installed driver for English or download an English version?

  Happy holidays to all!

  Hello

  Any other installer will not change such a, installation of settings of your OS, the installer itself is all over the world.

  In Control Panel, select clock, language and region.

  wihin the area section click on change the location.

  On the administrative tab, ensure that the colloquial language for programs no unicode as English (United States), click the button change if no change is required.

  In tab Format to ensure that English was selected too.

  Confirm any changes, restart your PC and check again, that the software should now appear as a result.

• The appearance has changed, and even the Start button is no longer a circle but the former rectangle that says start after the installation of an update.

  I recently installed an update of Windows for Vista.  The appearance has changed and even the Start button is no longer a circle but the former rectangle that says start.  How can I get the old look back with on the uninstallation of the update?  Thank you

  Original title: updates

  Hello

  It seems that the update was for graphics, as it changed the appearance

  If the update is the problem, you will need to remove it or download and reinstall the graphics driver from your computer or the manufacturer of the graphical Web site map.

  _________________________________________

  Read this information about updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• The following error during the installation of Windows: "cannot start Windows. A recent hardware or software change might be the cause.

  Help, please! Installing Windows Interrupted!

  Hi recently my computer was giving me a bit of concern for example (running slow, do not easily light etc...). A couple of days, my computer has decided not to put on after a glance on the net (on my other computer), I found I had a problem call KSoD or black screen of death, therefore I went on youtube and made all the different things said youtubers can fix this how ever none of these things worked, so finally I decided that I would have factory reset my computer/windows to using the system restore. However, at half way through the installation of windows after the factory reset (my computer came with no disk Windows), my computer has decided to remove what I believe to be called a blue screen of death, that this happened before and I thought it was part of the installation but when I turned my computer on he showed at the bios screen , but then it said 'unable to start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc and restart your computer. 2. choose your language settings, and then click Next. "3 click on repair your computer ' all this is very well apart from the fact that I do not have the windows installation disc. I'm stuck at this screeni however have a disc of windows 7 and that he was going to install windows7 after I got my vista Setup! but the only I see is the bio screen so I was wondering if there was some way I could install windows 7 from the bios or simply delete the entire half installed this error files windows vista from the bios screen? Please, any help is greatly appreciated. Or get a new internal HDD would fix the problem aswell?

  Hello

  You can check out the following link and check:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See also, how to start your computer from a Windows 7 installation disc or USB flash drive.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  Note:

  If the copy of Windows 7 is an upgrade, you will need to install a full version of Windows Vista and then upgrade to Windows 7

  I hope this helps!