No company activate the Simulator

Similar Questions

• How to activate the BB 10 Device Simulator?

  Hi guys,.

  I can't find a way to connect the Simulator for my computor and activate it. It is very different from the older Simulator device which is activated by USB connection anble. Could someone help me with this?

  Thank you

  A.

  You should be able to... but you can post to the boards of BES if you are having trouble.

• How to activate the blackberry bluetooth 10.3.1 Simulator

  Hi all

  I would like to set up a sample of app bluetooth through Simulator... can someone tell me how to activate the blackberry Simulator blutooth...

  It would be a big favor...

  Here's how you can do this:

  Test the Bluetooth applications

• activate the MMS onmy Simulator

  Hi all

  I know this is a stupid question but I really dn know where to activate the MMS option on my Simulator. I use JDE 4.6.1 and fault Simulator. I have passed through the following link ave

  http://att.DeviceAnywhere.com/new/tutorial.seam?tutorialId=2193&tab=tutorials&deviceId=651&CID=17726...

  But, in my Simulator option of "MMS composer", can u please. put some light on this subject, which allows to send and receive MMS through my Simulator so that I can work more in order to develop an application that intercepts theincoming and receive MMS.

  Thank you best regards &,.

  Kanak

  As much as I KNOW, simulators does not support MMS testing.

• OfficeJet 8600 more: impossible to activate the Scan

  Use OS x 10.10 and printing/scanning using wifi, all of a sudden the scan button went from my printer on my macbook pro. It worked fine until a few days ago. I tried to delete the printer drivers and reinstall. I chose the name of the printer and printing not slected to air. I checked all of the updates and also updated the firmware to the printer. The scan button is missing and the option "enable scan" is crossed out in red. If I connect the printer cable printer a new printer icon becomes available in the primnter options and it can analyze. Any help would be appreciated.

  Hi @PlusBiz ,

  I see that you have problems with scanning via the wireless network, but you can scan through the USB connection.
  I want to help you with this issue today.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Attempt to activate the scan of the computer again.

  Try to print and scan the image.

  If you do not always have the option, do a uninstall complete and reinstall the software.

  Uninstalling the printer software.

  The steps should also work for Yosemite.

  Also, check the following points:

  Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reinstall the software of the printer again. HP Officejet Pro 8600 series full feature software and drivers.

  If you're still having problems, it could have been an automatic update on the router and port scan isn't currently open.

  You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Please let me know the results.

  Have a wonderful day!
  Thank you.

• View of route in the Simulator

  Using graphs, how can I activate see tracing instructions in the Simulator?

  Where do I see them?

  This gives a test:

  https://developer.BlackBerry.com/air/documentation/BB10/testing_your_application_cmd_ms_2010851_11.h...

  Note that your SWF file must have been compiled w/debug options for you to be able to debug.

• KSOAP2 working on the Simulator, but failed on the device. Help, please!

  Hi all. Please, I need support on this issue.

  I have a request of KSOAP2 running which:

  1) Œuvres ALLWAYS on the Simulator (9700 Simulator)

  2) FAILS on the device when you use 3 G Internet Link

  3) work on the device when hard reseting it and directly using Wi - Fi link (if you switch to 3 G, it starts failing).

  When it do I get the following error:

  type of org.xmlpull.v1.XmlPullParserException:Unexpected (position: TEXT SocketException:...@1:33 in java.io.InputStreamReader@hexhere)

  Some other times I get an IO error faced:

  net.rim.device.cldc.io.ippp.SocketBaseIOException: Connection timed Out

  The funny thing is that it works through 3 G as 1 in 40 times... it seems that 3 G connection is too slow to KSOAP2 to work properly, or something like that. The complex type is small (8 strings).

  My webservice is a webservice VB.NET located on the production IIS server. It works well because it responds to any request of Simulator.

  Additional data:

  -Other Internet applications of device (such as the Internet browser) works well through 3G even when my application does not always succeed. Coverage of 3G service is excellent.

  -J' use JRE 5.0.0.

  -Device is a BlackBerry Bold 9700

  -Webservice is written in VB.NET in the production on the Internet Server, and it works perfectly because it responds to each request of Simulator.

  -J' use javaloader.exe to deploy the cod to the device files (both, ksoap library cod and cod of my project)

  -L'application is not signed.

  -Once the application starts breaks down (when you switch to 3G) it maintains in default if you return to the WiFi again.

  Here is my code:

  String res="";
  boolean error=false;
  Vector seguimientos = null;
  
  SoapObject m_Soapobject=new SoapObject("urn:tempuri", "GetSeguimientos");
  SoapSerializationEnvelope m_Envelope=new SoapSerializationEnvelope(SoapEnvelope.VER11);
  m_Envelope.encodingStyle = SoapSerializationEnvelope.ENC;
  
  m_Soapobject.addProperty("strInstance", "r2sistemas");
  m_Soapobject.addProperty("user", "myuser");
  m_Soapobject.addProperty("password", "mypassword");
  m_Soapobject.addProperty("comercialId", "3");
  
  m_Envelope.addMapping("urn:tempuri/encodedTypes", "Seguimiento", new Seguimiento().getClass());
  m_Envelope.bodyOut = m_Soapobject;
  m_Envelope.setOutputSoapObject(m_Soapobject);
  
  HttpTransport ht = new httpTransport("http://www.productionserver.com/service1.asmx");
  ht.setXmlVersionTag("");
  
  try {
      ht.call("urn:tempuri/GetSeguimientos", m_Envelope);
      SoapObject respuesta=(SoapObject)m_Envelope.bodyIn;
      seguimientos=(Vector)respuesta.getProperty(0);
      } catch (IOException e) {
      error=true; res="IO Problem: " + e.toString();
      } catch (XmlPullParserException e) {
      error=true; res="XMLParser problem: " + e.toString();
      }
  
  if(error!=true) {
      Seguimiento seg=(Seguimiento)seguimientos.elementAt(1);
      res=seg.Comentario;
      }
  
  this.add(new LabelField("aa"+ res));
  

  I read on this forum that ksoap2 cannot treat the http error messages. You must download the KSOAP source and change it to do this. Something like ServiceConnectionMidp. The message is this: link

  I use a port KSOAP2 library: ksoap2-j2me-core-prev - 2.1.2.jar, like I said it works fine on the Simulator. I tried to download the source code of KSOAP to debug in the failing methods, but was unnable to do compile ok on Eclipse.

  I really am stuck at this point. Please, any help would be great.

  Thank you in advance.

  Ok. Further reading took me to the problem.

  AFAIK, there are 5 ways to connect to web addresses from a BlackBerry device.

  Of course, the BB Simulator uses one that works with my WS. When my BB is connected via wifi it works as well. However, when I use the 3g from my device connection, I should mention the destinies of correct connection on the connection URL parameters.

  That's what I did:

  I read this: 1 Source

  And this (Spanish): Source 2

  Of course, I noticed that my BB is connected to a BES company, I must indicate the correct ConnectionUID to my address book of device on the connection string. So now the line in my code is:

  HttpTransport ht = new HttpTransport("http://www.address.com/service1.asmx;deviceside=false;ConnectionUID=YOURCONNECTIONUID");
  

  To find your UID connection, take your device, go to Options - Advanced Options - service book. Choose a book of service applications that connects successfully on your device (in my case Blackberry Internet Browser service), open it and copy the ConnectionUID. Then, paste it in the connection string.

  Now, it works great!

  My next challenge is to find connection string parameters correctly so that the application works on any device, not only on my ones company BES.

  Someone knows what should be the standard setting?

  I hope that my help of inquiry.

  P.S. still cannot complete successfully ServiceConnectionMidp...

• Ripple error deployment to the simulator fails

  Hi, I'm taking my first steps in development of BB. My company asked me to do a BB - app with IBM work lamp. I installed the SDK Webworks, waving and a BB Simulator (model 9900). I also added the necessary environment variables on Windows 7. I did a hybrid application that contains the html, css and javascript. After the creation and deployment of the local console of the work light, I can open the app with ripple. After the start of the services, I can pack and start the work of packing App., but the deployment on the simulator fails. I get the following error:

  Spawning Simulator 9900 - 7.0.0.384...

  stderr: CreateProcessW: the system cannot find the specified file.

  Exit take flight for 9900 - 7.0.0.384

  I have seen this error on the forum, but others had when packing. I get it through to the Simulator. Can someone help me with this?

  I solved my problem by choosing another Simulator, 9860-model. Ripple now starts the Simulator, which is extremely slow. The hotswap function crashes immediately, but the Simulator works with my application. However I am concerned that blackberry development tools is so buggy. But as long as I don'tn use the simulator that's good enough.

• How to activate the stylus and touchscreen Windows 7?

  How to activate the stylus and touch in windows 7? If it displays "no net and enter key is available for this view.

  Please tell me from the beginning on this topic...

  If this screen does not have a sensor to detect the pens or touch, you need to go buy a new touchscreen compatible.

  But if it worked before, then you probably have a driver installed.  Go to the website of the company that builds your screen, and search for downloads.

• Access to the Simulation evaluation Mode software within a project?

  I am using Captivate 5, and I see the possibility of creating a software simulation which is evaluated (classified) as a separate project. Is there a way to activate this same function within an existing project?

  For example, I can record a movie in the middle of the project by selecting the registration button in the top menu. However, I don't see a way to activate the part assessment of the scenario from this location,

  If there is no way to do this within a project, what is the best way to combine a simulation of separate assessment with an existing project.

  Your help in solving this problem is appreciated.

  Jeff

  You must remember that you can't have a scratched Captivate quiz or assessment of a single project.  So if your project already has an assessment, that add you including graduated simulation will become part of the same assessment.  You can't score separately.

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• before you go swim with my series 2. I need to activate the waterlock feature? or is it automatic? and just to unlock after swimming

  TNX

  Hello

  Swimming workouts

  Begin a swim practice in the application of the workout on Apple Watch series 2 models automatically activates the lock of the water, which locks the screen to avoid accidental interactions during your workout.

  To complete your workout and to evacuate all the water:

  • Press the digital Crown and side button at the same time (which makes a break from the workout).
  • Turn the digital Crown, which opens the screen and erases all the water inside of the watch (it can make a sound).
  • Forehand and press end.

  Other swimming

  If you plan to get your Apple Watch series 2 wet in other circumstances that when training of swimming - as to the course of General wear in a pool - you can manually lock the screen first and then drain the water from the speaker subsequently:

  • Slide up from the bottom of the face of the watch to open Control Center > tap water from lock to lock the screen.
  • When you're done: turn the digital Crown to unlock the screen and drained the water from the speaker.
  • The lock can also be unexpected water activated and unlocked immediately after exposure to the water.

  After bathing, make sure to clean your Apple Watch series 2 by rinsing them with hot water from the tap. Watch and the band should be dried with a non abrasive and non fluffy cloth.

  Strips of leather and stainless steel (Milanese Loop and Bracelet links) are not water resistant, so should not be worn when swimming.

  More information:

  Work with your Apple Watch - Apple Support

  On the resistance to water Apple Watch - Apple Support

  https://help.Apple.com/watch/#/apd707b42a5e

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• How to activate the spell checker

  I use Mozilla Thunderbirds e-mail and would like to know how to activate the spell checker - Help

  http://email.about.com/od/mozillathunderbirdtips/Qt/et_inline_spell.htm

• How do I activate the calendar when you first start, I chose disable

  I can not activate the calendar. On the first run, I chose 'Disable sockets calendar' and now I can not activate.
  How to activate?

  I try to reinstall Thunderbird and add addons Lightning, but even now calendar options.

  We managed to solve the problem of:
  1. Uninstall addition
  2. restart Thunderbird
  3. search for the site of the add-on and reinstall.
  4. restart Thunderbird and once the question arose as to the introduction of the calendar.

  Problem has been resolved.