No computer connection FTP/MP3

Similar Questions

• MTP device when connecting Samsung MP3 error

  My computer won't let me use my Samsung MP3 yp-p2jcb/xaa model. I use Windows Vista.

  I went to the website of Samsung and chatted with them. Him gave me this troubleshooting link: my computer is not recognizing my player when I connect it I tried everything and nothing has worked. Finally, he suggested that I have to contact Microsoft. The device is plug-n-play, so they did not all drivers. I took the camera and plugged on my friends computer, running Windows 7, and the MP3 works perfectly. My computer has had no other problem with USB connections.

  When I check the Device Manager, it shows the MP3 as P2 under other with an exclamation point. The error I get is "the drivers for this device are not installed. After that, I saw Code 1 and Code 28.

  Then, I tried to reinstall the driver to choose "Browse my computer for driver software" and then me C:\\Windows\system32\driverstore on my computer. It has been proposed by Samsung. I get the following message.

  Windows encountered a problem installing the software driver for your device

  Windows found the software and driver for your device but encountered an error trying to install it.

  ?   MTP device

  There is no driver selected for the item or a set of device information.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software.

  I do not understand that she finds the driver software, but cannot install it. The manufacturer can not help with this issue more as they operate very well, they have no drivers and they helped me to solve the problems. I uninstalled the device, restarted my computer and tried to plug it in again. It did not work. I'm lost and it seems obvious to me it has something to do with Vista. What is the next step I have to do?

  Hi DavidMapes,

  Below you will find several troubleshooting methods that should help you to solve this problem.

   

  TROUBLESHOOTING #1:

  Installation of Vista, an update of XP? If so, complete the WORKAROUNG STEP in this document.

  Check to see if there are any ghosts/ghost devices:

  1. click on start, point to programs, point to Accessories and then click command prompt.

  2. at a command prompt, type the following command and press ENTER:

  Set devmgr_show_nonpresent_devices = 1

  3. type the following command a command prompt and press ENTER:

  Start devmgmt.msc

  4 solve the devices and drivers in Device Manager.

  NOTE: Click on view the hidden devices on the view menu in Device Manager before you can see devices that are not connected to the computer. When you are finished troubleshooting close Device Manager.

  5 type exit at the command prompt.

  6. connect the MP3 to see if this solves the problem.

  TROUBLESHOOTING #2:

  What is the brand and model of your computer?  Make sure you have the most recent BIOS? Driver Chipset offered by the manufacturer.

  TROUBLESHOOTING #3:

  To perform a clean boot, follow the steps described in this document . It will be excludes any interference of the 3 part. If you encounter the same error message when you connect the MP3 player, please provide the received codes or error messages.

  MORE INFORMATION:

  A USB device may no longer work correctly when Windows Vista comes out of standby or hibernation

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Windows-encountered-a-problem-installing-the/b093934f-4227-424C-8d42-f17d53be4524

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Why my computer connects to the wifi via time capsule, but not my iphone, ipad or smart tv?

  Yesterday, there was an internet outage in my area. Eventually he returned to the top, but I could not always connect. I phoned by internet service provider and finally they got it working, except now my computer connects to the wifi, but my iphone, the ipad and the smartTV won't. I use a time capsule to connect. Help, please!

  This modem do you have? Brand and model please.

  It is configured as a router or bridge?

  There is a good chance that the TC I messed up in the trouble... It happens.

  Back to the factory and repeat installation... no file is lost it doing.

  Who is your ISP? What kind of services to wide band?

• Why used my computer connect to the Internet?

  Have a Compaq Presario CQ57. It does not connect to my home network. Rpet 'server not found '. My other computer connects fine. What is my problem?

  It might be a configuration problem or a tangle:

  Try / consider:

  • Turn off the router, leave it for a minute, turn it back on.
  • Try an IP address for the computer that is experiencing the problem.
  • You can even try another cable, if the connection is wired.
  • If the connection is wireless, try a wired connection.
  • You may need to update your drivers... Start

    Support and drivers

  See the documents below.  Even if you are convinced that the configuration is perfect, it is possible to have missed something.  It does not much to fault by the works.  It can help to have a guide to look at everything trying to locate the location of the problem.

  All things Internet:

  Networking & Internet Support - Windows 7

  The problems of Internet connection to broadband (Windows 7)

  • See this document and run the configuration test proposed:

  How to solve connection problems "Server not found / DNS Error."

• computer connection laptop HP Photosmart 7760 printer

  I just bought a new computer - hp pavilion and I cannot connect to my printer - hp photosmart7760. My printer is too old?

  Moved from feedback

  Original title: laptop computer connection with printer

  Hi Benny,.

  -What operating system is installed on the computer?

  You can read these articles and check if that helps.

  Installation of HP printer: http://www8.hp.com/us/en/support-topics/printerinstallation.html

  If you have installed Windows 7, then you can view this tutorial because it is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• hdmi TV/computer connection

  How you connect your computer to a TV to view the photo. I have the hdmi connector

  Moved from feedback

  Original title: tv/computer connection

  Hello

  To help you better, please answer these questions.

  1 Windows operating system work?

  2. What is the brand and model of the TV?

  I suggest you follow the provided articles speaking to connect the computer to the TV using a HDMI cable.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Digital cable tuners: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/digital-cable-tuners-frequently-asked-questions

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

  connection Wi - Fi

  My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

  Hello

  1 did you change your computer, after which the issue started?
  2. during how long have you had the problem?
  3. what web browser do you use?

  I recommend to update your network card drivers and check if that helps.
  http://support.Microsoft.com/kb/283658

  Let us know the status of the issue and also please answer these questions.

• I now have two copies of each song on my computer. An mp3 and a mp4. Which one should I keep?

  Original title: mp3 or mp4?

  I now have two copies of each song on my computer. An mp3 and a mp4. Which one should I keep?

  Hello

  Keep both until you can decide if you want only one. The compression ratio and other factors
  It will be different.

  Good Codec will allow you to play MP4 in Windows Media Player.

  Determine if 32 or 64 bits.

  Start - type in the search box-> Winver find upstairs and double click on - check version

  After that the foregoing, add codec - get these 32 bit if:

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ============================================
  ============================================

  If 64-bit:

  Read this 1st and go that route, or use the one below.

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit Vista - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 6.2.0 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack 3.7.0 (64-bit) (or newer)
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  ------------------------------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• computer connect laptop tv turns off the color scheme

  original title: computer connect laptop tv

  When I connect my laptop to a plasma tv via the vga cord input, the color on the TV set is switched off. I have used other vga cables and it hooked up to TVs and it is always. the color is fine on pc and tv until the hook u both together, what should I do to correct this?

  VGA is not the best way to connect them.  If you have an available HDMI connection use.

• How to download songs from my computer to my mp3 player and a sandisk?

  How to download songs from my computer (documents) to a sandisk?

  Hi wendi_wolf,

  The easiest way to accomplish this is to drag and drop files the location from the source to the destination location.

  Plug your MP3 player \SanDisk, copy the destination location (document music\) files and the Paste into the reader.

  Some MP3 player comes with the software; You can use the software to copy songs from a computer to an MP3 player. You can consult the documentation provided with it.

  Let us know if this helps

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• Computer connects to the Internet on all networks, except one

  A few days ago my computer stopped at random to connect to the internet via an Ethernet cable in my apartment.  It works very well, continuously for more than a year.  I first thought the network was down, but to verify ports three separate wall in our apartment (including the one in question) computer of my roommate and his computer connected perfectly.

  My computer can still connect to other networks (different buildings) both via radio and connected via Ethernet, if this isn't a hardware problem.  Currently, we have a wireless router configuration in our apartment that my computer can connect to.  For some reason when I am connected to the network via an Ethernet cable, the computer cannot access the internet.
  When connected, the State jumps back between "Internet access" and "no Internet access.  I tried to ping www.google.com and several other IPs known without success.  Works fine when I go wireless.
  I tried the following, without success:
  Reinstalled drivers for network cards
  Reset the network settings
  Reset Windows sockets
  Enabled IPv4 and IPv6
  Add favorite DNS servers (google and a few others)
  Restart
  System restore
  If anyone has any ideas, I can provide more information, if it helps...
  Thank you

  The problem was somewhat resolved.  When the connection to the Local network has been filled with the wireless network connection, the Internet took over.  I unplugged the router wireless and internet still works, so I'll consider it a success so far.

• My computer connects to my wireless connection but it say no Internet access

  Original title: my computer connects to my wireless connection but it say no Internet access

  I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

  I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

  Hello

  1 did you do changes on the computer before the show?

  2. What is the exact error message you get?

  3. What is brand and model computer?

  Method 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2:

  Follow the troubleshooting steps in the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

   

• printer indicates 'no computer connected' PC 'offline' reports state ok

  Recently exchanged printer for new Hp officejet 4500g - m. Able to make beautiful best on the printer keypad.  Cannot print from windows 7 on my HP Pavilion. have you tried convenience of MS and HP times.untold several hours and still not be able to print from the computer.

  Twice - I uninstalled and reinstalled and got the success message. Printer shows as default printer on the PC. I even bought a new USB 2.0 thinking that my old cable might be the problem. Drivers have been updated - by windows update. I even bought the update service to see if that would cure the problem. No chance!

  The help on the Officejet screen reports no. computer connected. Pavilion shows HP 4500g - m as my default printer. status in the device screen and printers of Pavilion is not 'ready' State, simply [0 documents in the queue] - is it a clue? When I try to print my email - small order screen shows hp4500g-m as 'OFFLINE' and work is located. On PC, the error message is the mistake of the printer only. So, how can I change the offline online?

  The printer is fine "of printer status report. Reports 'Connectivity settings', which shows the status of the network offline. > This is not an area that I can access the printers keypad. Or I've just not found not yet.

  I work in progress - Please rush help. And since I can't print this application I record as on 30/07/2012 date and time 12:59

  Thank you

  Mickeyjms

  Hello

  I suggest that you disable SNMP (Simple Network Management Protocol) support for network printers.

  a. click Start , click devices and printers.

  b. right-click on the printer and select printer properties.

  c. click on the Ports tab, and then select Configure the Port.

  d. uncheck the box for SNMP status allow.

  e. find the question.