printer indicates 'no computer connected' PC 'offline' reports state ok
Recently exchanged printer for new Hp officejet 4500g - m. Able to make beautiful best on the printer keypad. Cannot print from windows 7 on my HP Pavilion. have you tried convenience of MS and HP times.untold several hours and still not be able to print from the computer.
Twice - I uninstalled and reinstalled and got the success message. Printer shows as default printer on the PC. I even bought a new USB 2.0 thinking that my old cable might be the problem. Drivers have been updated - by windows update. I even bought the update service to see if that would cure the problem. No chance!
The help on the Officejet screen reports no. computer connected. Pavilion shows HP 4500g - m as my default printer. status in the device screen and printers of Pavilion is not 'ready' State, simply [0 documents in the queue] - is it a clue? When I try to print my email - small order screen shows hp4500g-m as 'OFFLINE' and work is located. On PC, the error message is the mistake of the printer only. So, how can I change the offline online?
The printer is fine "of printer status report. Reports 'Connectivity settings', which shows the status of the network offline. > This is not an area that I can access the printers keypad. Or I've just not found not yet.
I work in progress - Please rush help. And since I can't print this application I record as on 30/07/2012 date and time 12:59
Thank you
Mickeyjms
Hello
I suggest that you disable SNMP (Simple Network Management Protocol) support for network printers.
a. click Start , click devices and printers.
b. right-click on the printer and select printer properties.
c. click on the Ports tab, and then select Configure the Port.
d. uncheck the box for SNMP status allow.
e. find the question.
Tags: Windows
Similar Questions
-
If I always try sharing printer on another computer error and get the massage "this operation has been cancelled due to restrictions in effect on this computer"., I have so confiuse and little dizzy... What can I do to solve this problem
Hi Miknugraha,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description provided, its looks like you are unable to share the printer, it would be great if you can answer these questions to help you further.
1. have you made changes on the computer before this problem?
2. is it a security software installed on your computer?
I suggest you to see the steps in the following Microsoft article:
How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
Direct print from laptop computer connection
I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!
You have a wireless router? I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.
If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.
That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.
On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed. For me, it comes to 192.168.1.13. Enter the appropriate value, Next, Finish.
If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop. It would probably be a much better solution than to try to make a converter USB - lan.
-
Printer wireless connected but offline with new router Xfinity
A FIOS Actiontec router wireless, printer HP 6515 functioned well as a wireless network printer. Just replaced FIOS with Xfinity Cisco router. Shows printer HP 6515 as connected (print network configuration page) but both PC (Windows 7) indicate printer is in offline mode (no check mark). Printer has set the IP address with FIOS router. Running doctor printing & scanning HP without success. Suggestions? Thank you!
Replacement of your wireless router try here.
http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
-
The printer indicates that online, my laptop said that it is in offline mode, I've deleted and reinstalled the printer and still the same problem, please help
You are not quite correct. Some newer wireless printers have only a wireless connection. No USB port and a standard Ethernet cable port.
-
All of a sudden I can't order prints on my computer. I get a message saying that it is impossible to establish a connection. That is what it is?
It is almost impossible to help until that give you more details.
- What application or website are you trying to order prints of?
- Which iMac do you have?
- What version of Mac OS X are you using? Is it really 10.6.8?
-
computer connection laptop HP Photosmart 7760 printer
I just bought a new computer - hp pavilion and I cannot connect to my printer - hp photosmart7760. My printer is too old?
Moved from feedback
Original title: laptop computer connection with printer
Hi Benny,.
-What operating system is installed on the computer?
You can read these articles and check if that helps.
Installation of HP printer: http://www8.hp.com/us/en/support-topics/printerinstallation.html
If you have installed Windows 7, then you can view this tutorial because it is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.
Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Thank you.
-
Why can't I connect MY Kodak ESP 5 printer to MY computer?
Why can't I connect MY Kodak ESP 5 printer to MY computer?
Why can't I connect MY Kodak ESP 5 printer to MY computer?
Hello
The first step will contact Kodak to search for the latest drivers and ask about any known issues installing this printer for the version of Windows you have installed.
Kodak - Support Home Page:
http://support.en.kodak.com/app/home/src/gosupport/selected/true
Find answers: Kodak products
Concerning
-
The printer is listed under devices. Help
Hello
1. If it works well before?
2 did you change on your computer before this problem?3. is the printer connected to a computer network?
4. what operating system is installed on your computer?
What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
5. how to connect the printer with your computer?You can follow the suggestions and see if it helps.
Method 1
You can run the printer troubleshooter.
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterMethod 2
You can follow the procedure in the article.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsSee also:
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Note: The article is also applicable to Windows 7.
Share a printerhttp://Windows.Microsoft.com/en-us/Windows7/share-a-printer
File and printer sharing: frequently asked questionshttp://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions
-
After a storm, my HP Officejet Pro 8500 A909n Series, I am not able to print from my computer to the printer. I am able to copy and send a fax, but not able to do anything else. I get a message that the printer is offline and what to do, but not be able to change it to online. Help, I need advice and guidance
Hello
What operating system do you work?
You can try the following methods
Method 1:
Problem: The printer is offline.
Method 2:
The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer
-
Descjet HP 2050 all-in-one: I lost the disc to connect my printer to my computer
I lost the disk that connects my printer to my laptop and got a new computer and need to print but I cannot connect to my new computer! How can I get a new drive or connect my laptop to my printer without spending too much money and do not buy a new printer?
Hello
The drive is probably obsolete now. Please download the software and drivers (for Windows) following and install on your computer:
http://ftp.HP.com/pub/softlib/software12/COL32609/al-109407-3/DJ2050_J510_1313-1.exe
Kind regards.
-
printer and computer connected but not printing
connected my kodak c310 printer to my computer wireless but does not print
Hi Ken,
Thanks for choosing Microsoft Community Forums.
According to the description, I understand that the computer is not able to print from a wireless printer.
Let me go ahead and help you resolve the issue.
To help you better, please answer these questions:
1. what happens when you try to print?
2. you receive an error message?
3 have you tried to print a test page?
4. to which application you want to print?
I suggest you follow the provided methods to solve the problem of the printer.
Method 1: Run the Microsoft Fixit.
Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/
Method 2: Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Method 3: Install a printer on a home network
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network
Due to operating system Windows or anything related to the printer, feel free to get back to us.
-
I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?
Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine. It has only a single computer attached, or is it a printer networked with other computers?
If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.
Have a look here.
Software & Driver Downloads
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner. Windows Fax and Scan can be able to do. When you go in such programs are there options scan and they see your scanner? If this is not the case, try the full download.
If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).
For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.
-
HP DeskJet 3050 a"the printer and the computer are connected to different routers"
I am trying to configure my J611 all-in-one HP DeskJet 3050 again on my wireless network and this is the message I get "the printer and the computer are connected to different routers" but I only have one router! (Netgear WNDR3400). My operating system is Windows 7. What I am doing wrong?
Yes, you have a router, but there two (technically three) networks. I guess that is your printer or your computer is connected to the Guest network. Check that your PC is not on the network of comments.
-
DJ 3050 has j611 says connected but offline, can't print why
DJ 3050 has j611 says connected but offline, can't print why
lehmankm wrote:
light blue (flashing) wireless...
Ah... There's the data I needed. Wireless light flashing means that you are not connected to your routers SSID. You need to connect the printer to your routers SSID with password.
Maybe you are looking for
-
When I right click a game why do I have the option to run it in administrator mode?
I tried to fire up the game in administrator mode and I don't have that option or the ability to run in XP service pack 2, can help?
-
After re-istall xp memory problems
I have fixed the Bot infection by reinstalling windows xp, I had someone help from Trend Micro that out me and they said that the only solution is to reload. But I think you can help me with another problem with Windows XP. After loading, I have le
-
How to use setPadding in 4.5.0
Hello friends, I want to customize the editField by drawing rectangle outside and making the allignment do not touch to this rectangle. To do this in JDE 4.2.0 , I took 1 horizontalFieldManager, overrided paint and sublayout. Then, I took 1 editField
-
HP Deskjet 1510 all in one - all I have to do before I connect the power?
I just got the HP Deskjet 1510 all in one. Is there something I need to do before you connect the power? In the past with certain printers, which was a problem - some things you had to do before connecting the power supply or by using the installat
-
How return screen display upside down?
Original title: rotated screen Ive touched a button by mistake and my screen has rotated ro und, how can I turn it around back?