No content found or you are not allowed to this component

Similar Questions

• Why the NDP module says "you are not allowed for this operation?"

  Hello world

  I hope you can help me with this problem!

  I'm playing with the NDP module has a message saying 'you are not allowed for this operation.

  This happens when I try to create a new project and try to open the window to select a project type. It also happens when I go to the ADMIN and add new types of projects?

  Is there a role limiting me or does some other underlying problem?

  Thank you in advance.

  Hello

  I think that you might miss an active project type category.

  Go to Admin-> NDP-> categories of project types.

  You must have at least one category that is active (which is indicated by a green check mark).

  Once at least one is activated, you will need to go to the Cache and rinse the taxonomy of cache (just to be sure, I would empty Admin Data Cache Group as well).

  Then you can go to the Admin and configure your project types.

  Let me know if you have any questions,

  Dmitriy

• You are not allowed on this computer to install Kodak printer all in one

  I have a kodal while a printer installed.  When I try to print it will only allow me to print sizes THEY have.  If click Custom to select the paper size, I really want to use it, says this feature is not available because you are not allowed to save the settings for this computer.  I went to the permission settings and everything that the printer is checked with the exception of special permissions which it does not allow me to click on.

  You might want the laptop computer and the other computer (with a crossover cable) network and then share the internet connection.  Not only will you get operational, but will give you access to the internet without having to replace the modem (as long as the laptop is present and connected).  Otherwise, you have no choice but to replace the modem and get this computer connected to the internet, then you can install your device - there is no way around that need to be connected while doing if this is required by the software.

  I hope this helps.  I'll help you set up the network, if you want to go this route.

  Good luck.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Receive error message "you are not allowed to this directory or this page" using the identification information you have provided to the struggle. when upgrading to SP3.

  403-Forbidden: access denied

  While trying to upgrade to XP SP2, SP3, a server error message appeared as the title with the text "you not may to this directory or page using the credentials you provided for the fight."

  ????

  Hi ZRay,

  1. You use Windows update or manual download to install service pack 3 on the computer?
  2. During the process of upgrading to how you receive the error message?
  3. You have security software installed on the computer?

  I suggest you check out the article below and try the steps mentioned, check if it helps.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"

  http://support.Microsoft.com/kb/949377

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• You are not allowed to create or update this content

  I am trying to create a new post, but when I click on 'Post' I get the error message "you are not allowed to create or update this content.

  Is this a bug or is it user error?

  Try again in a little, it's a known bug. Also try to refresh the page or signing in.

• You are not allowed to open the form ORA-01403: no data found

  Hello

  I created a new forms of Oracle 10 g. It compiles successfully, but when it is open, it gives an error message: you are not allowed to open the form ORA-01403: no data found.

  I am already connected to the database. Please can someone help what is the reason of this problem, and no matter what possible resolution?

  Looks like you have some kind of security is enabled.  However, because you do not share details about your environment or what you're doing here is not that we can do is guess.

  • Exactly what version of forms do you use?
  • Exactly which version of the database that you are using?
  • You use something like Oracle E-Business (e.g. template.fmb)?
  • You created the form with Oracle Designer?
  • If you create a simple form using only the layout assistants and the DataBlock compared to schema Oracle demo (SCOTT), this form run?

  No additional details describing what you do or have done could be useful.

• You are not allowed to add the e-mail address of your account and user already exists

  Hi Experts,

  My SAP CLM (Contract Lifecycle Management) System integrated system of Echosign by SAP itself and we test the functionality.

  Everything works fine and I am able to send documents to the signature of the CLM system and the beneficiaries are able to sign the document and even get all historical information and the status of it.

  But I am facing problems below 2 cases,

  1. for a particular user, whenever the user sends the document to the signature, we get the error:-"you are not allowed to add that e-mail address to your account.

  2. for another user,who already have created account itself, whenever the user sends the document to the signature, we get the error:- 'user already exists: [email protected]"" " ."

  
  

  For question 1, I googled and found the link the specified item was not found. , who seems to have the answer, but unfortunately, this link seems to be outdated.

  

  Any help would be great.
  

  Thank you

  Uday Chassagne

  Hi Uday,

  I sent you a message in response. Please check and provide the requested information.

  -Usman

• Why this message: you are not allowed to view or update this topic

  Why this message: you are not allowed to publish or comment on it.

  It's a legitimate question.

  You encounter a bug in the Jive Software that runs this forum. Most of the time simply try again or refresh the page will fix the problem. There is one caveat with respect to time. You can't post more than once every 30 seconds, and it's to discourage spamming.

• Firefox MAC v30 with proxy must authenticate "Cache Access Denied" sorry, you are not allowed to ask: this cover until you have authenticated

  Firefox functioned perfectly until we have updated to version 30.0. It seems that the new version does not like our Proxy Configuration that requires users to auth with their AD accounts.

  In the latest version, Firefox will appear a box that allow you to type the user name and password that works perfectly. However, this is not pop up anymore and gives me this error message.

  The following error was encountered:
  

     Cache Access Denied.
  

  Sorry, you are not allowed to ask:

     http://www.google.com.au/url?
  

  This cache until you have yourself authenticated.

  I try to configure the username into a key ring and allow firefox to access manually, but Firefox seems does not access this key chain at all.

  Is that someone has a problem with the proxy server that needs to authenticate in Firefox30.0? Does anyone know the possible solutions?

  Thank you very much!

  Shuopan

  Trouble Shooting - update

  Interestingly enough, Firefox works for 1 minute after I use Safari with proxy Auth. However, if I get Safari for 1 or 2 minutes, Firefox will be stop working and displays similar error message.

  tried network.http.use - cache = false but does not work

  Thank you

  We find the solution of Philipp is useful.

  "Hello, this is perhaps due to the deactivation of some insecure authentication protocols in firefox 30: https://www.mozilla.org/en-US/firefox/30.0/releasenotes/#whatsnew .

  You can try to enter: config in the firefox address bar (confirm the message information where it appears) and search for the preference named network.negotiate - auth.allow - insecurity-ntlm-v1. Double-click it and change its value to true. »

  https://www.Mozilla.org/en-us/Firefox/30.0/releasenotes/#whatsnew

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

• EZ transfer for Windows XP displays the Permission Error Message: "you are not allowed to update Windows XP. Please contact your system administrator. »

  Install EZ transfer on Windows XP (32-bit) I get an error message stating:

  "You are not allowed to update Windows XP.  Please contact your system administrator. »

  However, I am the only user, and I am named as the administration system.  How can I fix?

  Hello

  Step 1:

  You can try to install Easy Transfer in safe mode and check.

  A description of the options to start in Windows XP Mode

  Step 2:

  You can also try to create a new administrator account and check.

  Create and customize user accounts

• Windows cannot access \\RIPSERVER. You are not allowed to access \\RIPSERVER... I can see the \\RIPSERVER on my network but cannot connect.

  Windows cannot \\RIPSERVERaccrss. You are not allowed to access\\RIPSERVER... I can see the\\RIPSERVER on my network but cannot connect. I'm running with 3 computers XP Pro windows SBS 2003 domain and a Windows 2000 (\\RIPSERVER) runs a computer to plate system that I use every day. I just added a new computer Windows 7 Professional and can see everything on the network (domain), I can access the server drives (where we keep the file sbs 2003), but when I click on the\\RIPSERVER I get error (cannot access...) If I do the same with any of the XP computers that he connects very well. Please help as I cannot connect I have to make my new computer an XP and I wanted to start to learn the Windows 7 operating system. Please let me know if you need more information on my systems.

  Thanks in advance for your help.

  Hi RC383,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  Link, please refer to:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• Impossible to share files on a network - "you are not allowed to access these files.

  original title: remote access computers

  I have 2 computers.  A PC in my office upstairs, a laptop computer in the family room on the ground floor.  I wish I could access on the computer to another without going through e-mail a file to myself a computer and opening and saving the file to the other.  I have searched onlline and through various Windows Vista books but could not find the right answer.  I get a "you are not allowed to access these files" (or something to that effect) whenever I try.  When I go to Windows Explorer and click on 'network', the two computers.

  Can no idea what I might be doing wrong or how I fix?

  Thank you.

  Hello

  You did changes to the computer before the show?

  You can check the permissions of the file or folder the file is saved in and appropriated:

  a. right click on the file or folder and then click Properties.
  b. click the Security tab.
  c. under group or user names, click your name to see the permissions you have.
  
  To take ownership of a folder:
  a. right click on the folder you want to take control and then click Properties.
  b. click on the Security tab, click Advanced and then click the owner tab.
  c. click on change. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. click on the name of the person you want to give to the property.
  e. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects check.
  f. click OK
  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx
  Note: applies to windows vista

  You can also check out the link and check if it helps:
  Connect to another computer using Remote Desktop connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  
  See also the link to learn more:
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions