The AirPort Extreme has it double bands?

Similar Questions

• The Airport Extreme has download slow unless its an apple product

  I need help.  I have an Airport Extreme router.  I run a HP all in one office, two smart TV, Wii and two boxes on my router.  Not all work at the same time, nor do two pass at the same time.

  I check my router on Mac speed: 100 Mbit/s easy.  I check my iphone: 100 Mbps.  I checked the HP desktop computer: 30-50 Mbps.  I haven't checked the Wii, Smart TVs do not open always Netflix, my boxes go slow and buffer for long periods of time.

  There must be a setting that does not allow non-Apple products to run more slowly.  I pay 100 Mbps and expect to receive 100 Mbps on the Airport Extreme for all products, not just Apple products.

  What I could try or have I missed that should be done so all non-Apple products get the speed of download and Apple products?

  I called support and they had me change the channels in the configuration of the Airport Extreme wireless.  That did not help.  I changed them back and now the iPhone runs slower, below 50 Mbps upload when you fill out a speed test on www.speedtest.com.  I'm sitting in the same place.  It makes no sense at all.

• The airPort Extreme has green light, but nothing can connect to it.

  My 5th generation AirPort Extreme suddenly stopped allowing all devices connect via WiFi or Ethernet. I can't see it in the AirPort Utility, I can not access it via the browser, and I've rebooted several times without success. I'm afraid, it may have just died, but I'll try to revive because while I can buy a new one, I hate the look of the new units. Any suggestions?

  Try powering down of the entire network... all devices... in any order you want

  Wait a minute

  Start the modem and let it run a few minutes

  Start the AirPort Extreme and run a full minute

  Keep a minute out one at a time until the entire network is back of boot devices

  Report on the results

• Add a second macbook air, now the airport extreme has stopped working

  I got a new (for me) 2012 macbook air to replace my MBA 2010 last night. I had another macbook air on the network to download some files in iCloud. As soon as I started the MBA new upward across the network crashed. (Features were always connection ac Airport Extreme router, green light, but no internets).

  Restart the router helped briefly before the problem comes back. When I connect with the new MBA, I had seen an error there are two Macbook Air on the network and it was changing the name of one of them.

  I read somewheres that download great traffic and a lot of features sometimes overwhelms the airport extreme (huh? not very extreme), so I made the turn power off the wireless on iPad, apple tv and the old MBA. This, most reboot the router and the modem seemed to do the trick for a while, until that there no more.

  I read around DiscoveryD and the problems with Hello. Will try this angle when I go home.

  I see here that maybe I need to reset (rather than just reboot) my router now that there's a new kid on the block - the new MBA.

  Any other ideas?

  Where did you got your 'new' MacBook Air? Apple or an evening private? If the latter, it can be configured as such not "play well" with your existing home network. If you have received this by a private party, I strongly suggest you reload a clean version of the feature of MacOS X. In this way you will start with a Mac "out-of-the-box" and should have an easier time getting connected to your network without problem.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• Impossible to extend the AirPort Extreme wireless network

  I have a wireless network set up with a time Capsule airport 4th generation.  I'm trying to take my old AirPort Extreme wireless 3rd generation. I have double. Kettle has implemented, but I get the status message on the extreme that it cannot extend the network.  I can get a strong signal on my iPhone from the point that I have placed extreme itching so I'm close enough to the time Capsule.

  Could I use a connection by current bearer through my home wiring to the extreme and extend it like that?

  Does anyone have any suggestions?

  Please follow these steps closely and report on your results.

  Power off time Capsule airport.

  Wait 10 to 15 seconds

  Power up Time Capsule airport

  Reset the AirPort Extreme back to default factory

  Set up AirPort Extreme still extend wireless signal of the time Capsule

  Report on the results

• Time Capsule will not extend the Airport Extreme network

  My airport extreme (do not know what version... can't even find it in the system report) offers a WiFi modem. I have a Time Capsule 4 G which extends the network. This works well for a few years now. Suddenly, the CAP began flashing yellow. Time capsule said Airport utility cannot extend the network and I should make sure the password is correct, that it is in the signal of a network, etc. I went through the settings of the time capsule by ensuring that passwords are correct. It is certainly within the range of the signal of the airport extreme (they are both in the same place as always... Besides, I put my iPhone next to the time capsule and I get a signal strong). I tried a hard reset of the time capsule. Of course, this does not work.

  Time Capsule seems to be communicating with the computer very well. I can access it via the Airport utility and reboot. I can access the data on its disk backup. Airport Extreme is to give a signal of good wi - fi connection. I'm still able to pick it up with my computer (even if my computer is far more than the time capsule).

  Someone has an idea of what's going on?

  Given that the Capsule does not correctly connect unless everything is OK with the AirPort Extreme... I suggest that you turn off the time Capsule for now and check that everything works correctly on the AirPort Extreme.

  My airport extreme (do not know what version... can't even find it in the system report)

  You say that the AirPort Extreme does not appear when you open AirPort Utility?

  If so, press and hold the option on your Mac key while you double-click on the image of the AirPort Extreme.

  Model of the AirPort Extreme, you will appear at the top of the summary page. What is it?

  Near the bottom of the summary page, check to see if there is a parameter that is displayed for the State.  If there is, what is the message next to status?

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• The airPort Extreme (2007) and Time Machine

  Hi all

  I read the info "how to ask a good question" and apparently you need details. I'll try and be concise but informative with my problem. It has been a long journey to get to where I am, but hopefully, with a little help from this amazing community, I can get to my destination.

  Task

  To produce a backup solution Time Machine for the family spending as little money as possible and using the BRIC and broc, I already have.

  Equipment available

  I have a House with some ethernet cables for most rooms that through switches to allow a variety of, most entertainment devices to communicate. It is:

  1 x NAS/Media (ReadyNAS Duo v2) server,

  2 x TV (Samsung),

  2 x TEU (Beyonwiz),

  2 x Apple TV (a 2 nd generation the other is the latest version)

  2 x DVD players,

  1 x iMac.

  2 x 8-port switches,

  1 x 16 switch ports,

  1 x AirPort Extreme (2007).

  1 x Airport Express (age unknown but older than the extreme)

  1 x Fritz! Box 7490 Modem/Router

  Courses in place

  All the associated TV stuff are connected in 2 rooms through ethernet via switch 2 x 8 ports switch 16 central port and then to the Fritz! modem/router box.

  There are also all the usual WiFi going on with mobile phones, iPads and laptops.

  Remarkably, it seems just to work!

  However, I want to add some backup data on our computers. I tried to do by using the ReadyNAS as it is supposed to support Time Machine, but I can't it to appear as a backup destination. So, I thought, as I have AirPort Extreme, I add it to the network and attach a USB HDD for Time Machine since it is supposed to be easy. However, I've been home for hours and cannot make the HARD disk appear in system preferences/Time Machine.

  I plugged the Airport Extreme in one of the switches 8 port said to create a wireless network with the same details as the Fritz! The box according to another article of the support (Airport Extreme wired AND expand network - need of entry). Airport utility shows me Wi-wired connections and seems to work.

  I look at the AirPort Extreme disks tab and can see the attached USB drive here. However, it does not appear as a choice of drives available for backup in Time Machine preferences. I tried 2 different discs with the same result.

  The Question (finally)

  How can I get Time Machine preferences to show the USB disk attached to AirPort Extreme as a valid choice for backups? If anyone can give me a little help in the right direction, I would be very grateful.

  Thank you for reading this,

  Grant

  Unfortunately, the key here is that the version of AirPort Extreme you have does not officially support Time Machine backups on a drive to the USB port of the device.

  The only version of the AirPort Extreme, which will officially support Time Machine backups on a drive in the USB port on the airport is the 802.11ac current version that looks like a "tower". Older versions of 'flat and square' of the AirPort Extreme don't support Time machine with a USB drive attached.

  To check, please see "Time Machine in charge of USB drives" in this Apple support document... AirPort base stations: discs on USB - Support Apple

  Support for time Machine to USB drives

  OS X Time Machine supports compatible USB drives encrypted, related to the time Capsule (802.11n and 802.11ac) AirPort and AirPort Extreme (802.11ac).

  Given that the average life of most wireless routers lasts about 5 years, and your AirPort Extreme seems to be about 9, your AirPort Extreme did very well for you... much better than the average. It might be time to start thinking about a replacement who will be responsible for backups Time Machine... either a time Capsule (i.e. an AirPort Extreme with a built-in hard drive) or another AirPort Extreme.

• Why is my slower than wifi ethernet download speed when using the airport extreme?

  Hi all

  This is my first post here, so please bear with me. I currently own stunted 2011 Macbook Pro 13 inch and an extreme A1521 from the airport. My ISP has promised 50Mbps downloading and sending 10 Mbps. When I connect my MPro via ethernet/wi-fi to my modem I get as promised. When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok. However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps. Anyone know how to fix this?

  If you check the 'fine print', your ISP has promised "up to" 50 Mbit/s and 'up to' 10Mbps.  The ISP might provide more than that during periods of slow activity, like the days of the week during the day, but much less during evenings when there are many more users on the Internet.

  When I connect my MPro via ethernet/wi-fi to my modem I get as promised

  I assume that you meant to check the Ethernet connection, you disable WiFi on Mac when you do this. And unplug the Ethernet cable when you check the speed of the WiFi, correct?

  If so, this tells you that the Ethernet port to both the modem and the Mac work properly, and WiFi work correctly as well.

  When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok.

  If this tells you that the Ethernet connection between the modem and the AirPort Extreme works correctly, and wireless works fine on the AirPort Extreme.

  However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps.

  Well, you know that the Ethernet connection between the modem and AirPort Extreme works because you can register 48 Mbps Wireless.

  Thus, the possibilities are narrowed to two elements at this stage:

  (1) the Ethernet cable is defective or making intermittent contact. Try another Ethernet cable, to ensure.

  (2) If you have turned off AirPort Extreme and rebooted several times, and you know that the cable between the Mac and AirPort Extreme works properly, then you have reduced the question down to the Ethernet on the AirPort Extreme, which is probably defective switch.

  If you have not already done so, try other ports Ethernet on the AirPort Extreme.

  As a last resort, perform a reset material on AirPort Extreme and put up again. To perform the Hard Reset... power on AirPort Extreme for a few minutes, then hold it pushed in the reset button on the back of the unit (near the AC power plug) for 7-8 seconds and release. Allow a minute for the AirPort Extreme restart orange light flashing slow.

  I once went through two consecutive airport extremes with the same question about 8 months ago, so it can happen.

  If you're still having problems, then it is time to take the AirPort Extreme of Apple Store... If you have one near you... or contact the Apple Support directly by clicking on 'Contact the Support' in the upper right area of this web page.

  Good luck!

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• the Airport extreme, giving a slow wifi connection

  Hello

  I've got my download speed of 200 Mbps cable company. I checked a good signal by plugging directly in he back of the Modem (to remove the photo Airport extreme wifi.) ... I have 221Mbps actually...

  However, once I'm going to plug in the Airport Extreme and text my speed on wifi, I get only between 24 Mbps or max after several trials of 54 Mbps on download... I should get just under 200 Mbit/s because of the normal fall through wifi... However, not to the extreme I loss I get...

  Tuesday Apple Support has helped me to perform a reboot of the router and I have been good to get 198Mbps... It is here 2 days later and I'm back down to 24 Mbps...

  I tried to redo the reboot: unplug the unit, hold down the reset button, then while holding down the reset button, add power on and continue now stuck until it flashes yellow... But curiously, after it flashes it goes straight to the green... (never asking me to airport utility to add a password)

  My Wifi speed stink...

  What continues with this device... anyone have recommendations?

  I already proved the cable line and the modem (with the support of motorola)...

  Thank you

  Most likely you have a faulty AirPort Extreme. Please ask Apple to replace this unit for you.

  If you wish to renew a reset, follow the instructions very carefully:

  Turning off AirPort Extreme

  Wait 7 - 8 seconds

  Hold the first reset button... and hold in an additional 7 to 8 seconds while simultaneously you reconnect the power on the AirPort Extreme.

  Release the reset button to zero after the period of detention

  Allow a minute for the AirPort Extreme restart. The light will be Orange fixed for 15-20 seconds about, then turn to flashing orange slowly after about 30 seconds

  A slow amber flashing light... about once per second... confirms that the airport has been reset and you can set it up again.

• Where can I find the Airport extreme N model number?

  Where can I find the Airport extreme N model number?

  It seems that the 3, 4, 5 are all Ns.

  I wish that my laptop wireless backup. A friend has his 5 AE do this via the usb port that is connected to a powered hub.

  Thanks for any advice.

  ett2 wrote:

  Where can I find the Airport extreme N model number?

  It seems that the 3, 4, 5 are all Ns.

  That's kind of how count you...

  But if your AE running 7.6.4 firmware it is Wireless N...

  A look at the base of the number. It is on the first line of molded rubber or paper label. A1408 is Gen5.

  I wish that my laptop wireless backup. A friend has his 5 AE do this via the usb port that is connected to a powered hub.

  Now for a piece of info you don't want to know.

  http://pondini.org/TM/airport.html

  Apple does not support the time machine is a model AE before last Gen6. A lot of people use it, but it can be unreliable... people have a different experience. Just to note that it is not taken in charge and reliability might be good bad or anywhere between the two... Ask yourself how useful is a backup that is not reliable.

• provider changed vague Qwest and now one device connects to the net.  Seems to not be recognizing the airport extreme.  Patches?

  Decided to change providers.  Network domestic fine fixed by extreme airport which has been consulted by 9 apple devices and windows device.  After the wave was installed yesterday, the only device able to connect is the cell that was active at the time of installation.  Is this a problem with my airport extreme or vague does not not with mac?  All the patches would be appreciated.

  After the wave was installed yesterday, the only device able to connect is the cell that was active at the time of installation.

  Sounds like Installer connected your laptop directly to a modem to put in place the new connection.  If that's what happened, then the modem will recognize your laptop, but it will not recognize the AirPort Extreme, then it will appear as if only your laptop can get a connection.

  The modem and AirPort Extreme should probably be reset and then set it up again. We'll know more soon.

  Can you provide the number of brand and model of the modem that was shipped with your service?

  What operating system uses the laptop?

• Cannot set the Airport Extreme to extend the existing network

  Network WiFi of my holiday home is provided by the router from my ISP (Time Warner). I have an Airport Extreme, which used to be configured to provide the WiFi network to another well, and I would use it to extend the existing on the TWC router network.

  I had a lot of trouble to do a factory reset on the Airport Extreme, but I'm sure I managed (by turning on with the pressed reset button) after several attempts. At least the extreme doesn't show signs of the old network, he has provided.

  When I try to set it up in the Airport utility, he wants only to create a new network. If I click on 'Other Options' and select 'Add to an existing network', the next screen is titled "This Airport Extreme will create a network" and prompts to enter a new network name and password. (Specifying the name of the network current generates an error because the network already exists, as I expect for the creation of a new network.)

  Any ideas on how to tweak this Airport Extreme by extending a network?

  TIA,

  Doug

  P.S. I have reviewed plugging extreme in one of the TWC router EtherNet ports and create its own WiFi network (with the advantage of adding support for 5 GHz), but the last time I tried I lost all connectivity; I'm afraid that the ISP network might protect against too broad network, although the glitch may have been a coincidence. If anyone has experience/ideas on this alternative configuration, I might be willing to try again.

  AirPort Extreme would not be able to connect using a wireless connection and to extend the wireless network of the ISP, but if you can connect the AirPort Extreme to the ISP using a permanent router, wired Ethernet cable, then AirPort Extreme could be used to provide broader coverage of wireless in this way signal.