No data to the next level

Similar Questions

• Why candy crush game won't let me ask your friends to help them get to the next level

  Candy crush does not send friends the help message for the next level, this is just a space square, although everything about the game is always displayed and I can play the games that I've played

  Hello

  1. you are trying to play a game online?

  2. were you able to play the game before with no problems?

  3. have you made a recent software or hardware changes to the system?

  You can read the article and check if it helps:

  Resources for troubleshooting problems in Windows XP

  You can also check with the manufacturer of game and check if any arrangement had to be changed.

• Failed to load content in a frame. Content of the framework is responsible to the next level

  Hello
  
  We have a requirement that one of our page (schedule) must be called from financial information (EN, a different web application). EN opens the page of planning in a new framework, you get a dialog box with the message:
  Failed to load content in a frame. Content of the framework is responsible to the next level.
  
  To resolve this problem, I put the case frame to 'never '.

    <context-param>
      <param-name>oracle.adf.view.rich.security.FRAME_BUSTING</param-name>
      <param-value>never</param-value>
    </context-param>

  This solves the problem, but I want to know is - this safe from the safety point of view.
  
  Thank you
  Matt.

  Hello
  Ideally, you use "differentDomain" instead of "never", if the page is part of the same domain. If you use "never" and the page is available on the Internet, then you people risk wrap in their iFrame to launch phishing attacks. If you have disabled basically a native security feature in ADF Faces. Its you who can decide if phishing is a thread in your application

  Frank

• The format of the date of the next qeries even!

  After you change the value of NSL_date_format by default, why not the format of the date of the next qeries even?
  

  SQL> alter system set nls_date_format='yyyymmdd' scope=spfile;
  
  System altered.
  
  SQL> shutdown immediate;
  
  SQL> startup
  
  SQL> select sysdate from dual;
  
  SYSDATE
  ---------
  12-MAY-11
  
  SQL> show parameter nls_date_format;
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ----------
  nls_date_format                      string      yyyymmdd
  
  SQL> SELECT value FROM v$nls_parameters WHERE parameter = 'NLS_DATE_FORMAT';
  
  VALUE
  ----------------------------------------------------------------
  DD-MON-RR

  Please read "why not the NLS_DATE_FORMAT in my work of init.ora sometimes ' http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551282707163926958

• Calculate the Date of the next

  Hello
  
  I have two dates:
  
  Start date: December 18, 2007
  End date: December 18, 2012
  
  I would like to calculate the next payment date, using the example above, it would be December 18, 2010.
  
  How can I achieve this in SQL by using the current date / month, keeping in mind, if sysdate is past the date, then the next payment date will follow month.
  
  Thank you
  
  Published by: sliderrules on December 15, 2010 08:50

  Hello

  Assuiming the due date is the same day of the month (if possible) as start_date:

  SELECT  start_date
  ,     ADD_MONTHS ( start_date
               , CEIL ( MONTHS_BETWEEN ( SYSDATE     -- or maybe SYSDATE + 1
                                       , start_date
                              )
                   )
               )  AS next_payment_date
  FROM    table_x
  ;
  

  If you happen to run it on December 18, the expiry date should be December 18 or January 18?
  The code above returns on 18 December. If you want Jnauary 18, replace SYSDATE SYSDATE + 1.

  Assuiming that the due date is the same day of the month (if possible) as end_date, you could do something similar with the help of end_date.
  Whatever it is, only one of the columns plays a role in this problem? What results would you if, for example. start_date was January 1, 2010 and July 20, 2012 end_date?

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT statements) and also publish outcomes from these data. For the results, after what you want if it was executed on 15 December 2010 at noon.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• Dates for the next 14 days

  Hello

  In my App, I need to display the next 14 days Dates of the current day.

  How can I get then 14 dates?

  I am able to get the current date.

  Thanks in advance.

  Bingo!

  Earlier, I tried the same thing and its working very well.

  1 day = 86400000 millis

  long currentTime = System.currentTimeMillis(); 
  
  currentTime += 86400000; // for 14 times
  

• Filter to display the end date in the next 30 days

  Hello

  In OBIEE 11 g I have an attribute for the date of end of contract, how can I filter to show only the contract which will end only in the next 30 days - I need a filter to have like SQL

  Assuming that your LC End Date is indexed, you can get much better performance if you create a filter LC end date and place it between two Expressions, SQL: current_date AND TIMESTAMPADD (SQL_TSI_DAY, + 30, current_date)

  

• Some menus sublevel block to the next level

  I use the most recent upgrade of Muse for the first time and the menu widget to create a horizontal menu. When I saw the site in Chrome, sub-level menus are positioned covering their high-level items is not possible to access the top-level page. I've never had this problem with any previous version of Muse. Can I fix this, or is it a problem that I'll be stuck with until the next review? Here is a screenshot:

  

  Thank you for sharing the file.

  After reviewing the file, I found that you have applied the race of 50 A-master page that pushes the submenus to the top of the same distance.

  

  Remove the stroke will correct the problem for you.

  Concerning

  Vivek

• change the date of the next invoice

  Hello

  is it possible to freeze my creative cloud for 2 weeks? We pay every month for CC and the next payment will be due on December 19. 18 December is our last day, so - if possible - we would like to ask the next invoice of 4 January (not 19 December).

  Thank you much for the help!

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Budgeting to the next level

  Hello
  
  The planning application is created to use bottom-up: approach of the budget at the lowest level and he.
  
  Is it possible to budget at a higher level (groups of accounts) and to allocate to the level the lowest with a business, rule
  
  Give me an example.
  
  Thank you!

  You can change the version target for you can make budgeting from top to bottom:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch10s04s21s01.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• pass-through of a Subvi to the next level with continuously running loops

  Hi all

  It is a very simple question, for some reason, data available as a Subvi indicator doesn't it up level vi. I think it might be something to do with the while loop I use, but I cannot understand, any help will be appreciated. I don't think I quite understand how data comes out of a loop constantly running.

  GPSdisplay runs a driver called GPS.vi (im not worried for my event structure immediately, which could be bad, but I am yet to test this bit yet) 1 probe should have the values of GPSCluster

  

  Loop in GPS.vi. GPSCluster (sensor 2) is updated correctly

  

  I can't work on why the data is not passed to GPSCluster at the top of page vi

  

  Hi bennymacca,

  I think that you are on the right track with a FGV. You can do quite easily with GPS vi you have.

  Before going further, your GPS while loop will return only the last reading and because the Boolean value of "Read" output state is set to FALSE, it will not stop. You see it out at all? The logic, I read, once entering this while loop, that he will not stop until said.

  There are 3 options you can try.

  (1) use a FGV, because you are looking in. To do this, you need to change the boolean TRUE State and set records in the GPSCluster - to analyze the information around, holding each time the vi is called and you leave. Outside the while loop you will thread to the top of the cluster to the indicator that you want to collect (OR you can have it inside the case statement where you read - be careful here, if).

  (2) in the main code, above the frame of the sequence, you can place the GPS vi while loop (the ' read' a), given the State of the boolean connected to a local variable of the Stop button. This while loop will start depending on how feels LV, wire, one line error for the two while loop and Frame (indicating that the two are to run in a parallel mode), OR you can put it in a case statement and say 'go' when you want to start playback. In this while loop, you can then copy the data to read directly in your variable Cluster that it is generated.

  But with (2), you move yourself away from the purpose of the GPS vi, which would be to bring all the features of the GPS functionality in a vi - which is a good idea.

  (3) put a condition on the State of the Boolean case "Read" statement - just make it TRUE when you want to stop reading the data (do you have a time or a condition, you can check here?). Even by doing this, you would / may still need to shift on your lease registers loop to keep the data for each iteration.

  I hope that all of this help. See you soon. David.

• How to get the file setup.exe to the next level?

  Greetings!

  I am building an application for distribution of my project.

  When I finished, I have the following file system to copy on a CD:

  -Folder of install main application

  -Application.exe (and alias and ini)

  -file data

  -File volume

  -bin folder

  -license file

  -folder supportfiles

  -nidist.id

  -setup.exe

  -setup.ini.

  I would get the setup.exe file to be on top (in the installation folder main application), so that a user can immediately find this file to start the installation.

  Is there a way to achieve this?

  I tried to do shortcuts, but the path of the shortcut is absolute, so it does not work on the CD.

  Thanks for any help!

  DCanQAlias wrote:
  [...]

  -Folder of install main application

  -Application.exe (and alias and ini)

  -file data

  -File volume

  -bin folder

  -license file

  -folder supportfiles

  -nidist.id

  -setup.exe

  -setup.ini.

  [...]

  This configuration file is typical, if you create the Setup program in the same directory as the executable (which would by default).

  But please note that the Volume file is the full installer. So if you want to distribute the application, please use the Volume folder (and its contents) only!

  The bin folder contains the files * .cab - who are the installation for the MSI (Microsoft Installer) files. These files contain the files you want to distribute, if your application, application settings (ini and aliases), as well as the data folder.

  So you see if you copy the Installer Application folder any hand, introduce redundancies have occurred in these files...

  hope this helps,

  Norbert

• Do I have to remove the last batch of data before the next batch of POST import?

  Hi all

  I am coding an integration with the API bulk import Contacts in Eloqua.

  Due to more than 32 MB capacity, I have to divide the data into several lots. So, I POST a Contacts import and PUBLISH data from Batch_1 import.

  After the Batch_1 data synchronization was successful, I would point OUT Batch_2 and synchronize it.

  Here's my question: what will happen to Batch_1? Is it to sync again? What I have to remove it before display Batch_2?

  Thank you

  Biao

  No, you don't need to REMOVE the resource export or sync associated with the first series before starting the second.

  The flow would be:

  1. Create import #1
  2. Create import SEO sync #1 #1
  3. Start to run the synchronization #1
  4. When you are finished, check the status of synchronization #1
  5. Create import #2
  6. Create import SEO sync #2 #2
  7. Start to run the synchronization #2
  8. When you are finished, check the status of synchronization #2

  And so on.

• can we start production on site awaiting replication data at the OS level?

  Hi, I am currently building a backup site. DB version is 11.1.0.7 and aix operating system.
  
  Our team of storage offered to use their replication tool to replicate production on host data watch.
  
  I don't know if it is one another way of RMAN duplicate.
  
  Thank you

  Well then, in the case of the SAN replication you need not to stop your production database as replication will be transparent to the database.

  To test replication works very well and to ensure that the reverse replication product, you will need to stop the database and files etc. systems take it apart before starting the database at the secondary site. Your SAN provider should be able to give details on the procedure.

  However, this kind of strategy DR is more complex than dataguard.

• How to make a form to fill out pdf to the next level?

  I created a form with fields. What I want to do now is download the form on my site that the form can be filled permanently by different people. Whenever a person could fill, it would stand on its own, not to be a collaborative effort. Wouldn't they be able to print or copy any part of the shape or text. Once they would fill out the form, I would like the information they capture to be saved (in the form itself if possible), so it could be picked up by our care. As a secondary issue, I would also like to put safety on the form, so he couldn't be copied/changed/print. Am a user of Adobe Acrobat for a long time but have not tried this before. I have the version Pro XI. Any help or insight that someone could provide would be much appreciated. Thank you.

  Since my question has not been answered by anyone, here's a new. What is the point of asking for help if nobody answers? Very frustrating. I have the classroom in a book, but I ask just a simple explanation of how the highest works.

  Hi jillb38584886,

  I provided you a few KB doc. for help, please refer to them: -.

  Publication of PDF forms on the web: https://helpx.adobe.com/acrobat/using/publishing-interactive-pdf-web-forms.html

  Securing PDF forms: using Acrobat | Securing PDF files with passwords

  Kind regards
  Nicos