no detectable Bluetooth keyboard

Similar Questions

• Iconia W700: Bluetooth keyboard not detected in Windows 10 x 64

  I'm trying to update all computers at home on Windows 10 and it was pretty painless for most of the devices so far. However, I can not get my W700 Iconia tablet to recognize the Bluetooth keyboard.

  Is the keyboard with integrated lid, and I followed the procedure, as indicated on the Acer Web site, to hold the power button on the keypad for 5 seconds to put it in discovery mode and then adding a Bluetooth unit device. Of course, the menus have new sites, but are not hard to find.

  I have updated the driver for Bluetooth on the Tablet, but who has not remedied the problem. I looked around and couldn't find any mention of this problem here or elsewhere, probably since Windows 10 has just launched a few days ago.

  Okay, so I don't know if the driver was actually the question, but Acer documentation to set the Bluetooth keyboard pairing mode requires that you hold down the power button until the two LEDs on the departure of keyboard alternately as on a police car.

  If anyone is reading this and it still does not allow you to associate the keyboard, then here are the steps to get the right Bluetooth driver:

  1. Open Device Manager (right-click the windows down icon on the left)
  2. Expand the "Bluetooth" category in Device Manager
  3. Right click on the Bluetooth driver (should be first in the list, if there are several devices listed)
  4. Click on uninstall
  5. Restart the tablet. Bluetooth driver is reinstalled on reboot.
  6. Reopen Device Manager after the connection
  7. Right-click on the Bluetooth driver, then click on "update driver software... »
  8. Select the option for Windows find the driver software.
  9. An update must be downloaded and installed.
  10. Now, repeat the pairing steps detailed above, and you should see an option for the pair the keyboard appear in the Bluetooth settings.

  I am subscribed to this topic so if anyone has a problem, just answer and I'll try to help you sort.

• Iconia A500 Bluetooth sees my A200 but not a Belkin Bluetooth keyboard.

  My Iconia Tab A500 Bluetooth will not detect a Belkin Bluetooth keyboard.  The A500 is running Android 4.0.3

  My Iconia Tab A200 detects and pairs at the keyboard without any problems.

  The A200 and A500 discover each other and pair up without any problem.

  Please - Suggestions?

  Went and got a GE Bluetooth keyboard and it connected first time.

  So, we'll keep the Belkin with my A200 and A500 with GE keyboard.

  Go figure!

• need help make bluetooth keyboard & mouse Microsoft works on Tablet

  I had a Motion LE1600 Tablet for a few years. I like it. I had to recently reimage my Windows XP and start over. I improved all Svc Pack3 and reinstalled programs. I use Security Essentials. I still need to get my Microsoft IntelliMouse explore and Trackball bluetooth keyboard work. Currently I use a USB keyboard and a mouse, but I have the IntelliMouse CD that looks as if it would install two items. I can't make it work and I would really like to help someone who is very familiar with these items.

  I tried and failed to do this work. I tried to follow all the items on the installation guide that is displayed on the screen during installation, but I can't understand even when the connection of brand/Break button is on the keyboard.

  Ouch! I really need help from someone who is familiar with these elements!

  Hi JeffDavis,

  · You receive an error message or error during installation?

  You can follow the steps from the link below: troubleshooting failures in the detection of new Bluetooth mouse or keyboard:http://support.microsoft.com/kb/811805

  See also: Troubleshoot installation of Intellipoint and IntelliType LifeCam software:http://support.microsoft.com/kb/953691

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to combine a bluetooth keyboard 6000 Microsoft with my hp laptop. I received a 0x007139f error message. What does that mean?

  I'm trying to pair a bluetooth keyboard 6000 Microsoft with my laptop to hp (using Windows Vista).  I also bought a wireless chip to be placed into the USB port, then I got a 0x007139f error message.   What does this code mean?

  Hello

  Method 01:

  I suggest you link and check

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 02:

  http://www.Microsoft.com/hardware/Bluetooth/en-us/default.mspx

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

• Logitech bluetooth keyboard K480 pair with my Windows 7 computer

  * Original title: Logitech bluetooth keyboard K480

  I have a Logitech bluetooth K480 keyboard won't pair with my computer Windows 7, the devices to show but it does not work with the key board.

  Joe

  Hey Joe,

  Thanks for posting your query in Microsoft Community.

  It can happen because of the conflict of device driver if Windows update tries to install the updated driver for a device that has an updated driver.

  • What is the brand and model of your computer?

  While you reply us with the above information, you can try the following solutions and check if this solves the problem.

  Method 1: Run the corner hardware store and check if it detects problems.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2: Try to remove and then reinstall the keyboard.

  First, connect a wired keyboard or mouse to your computer. So, if you have Bluetooth wireless technology installed on your computer, follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click on Bluetooth

  Devices.

  b. Select the keyboard or mouse that does not work, and then click Remove.

  c. click Add, press the reset button on the bottom of the keyboard or mouse, check the box my device is set up and ready to be found and then click Next.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

  e. If you have tried this step several times, and your computer still cannot find the device, check that the device has fresh batteries.

  f. If the device is a keyboard, exchange of security with the keyboard keys. If the device is a mouse, click don't use a passkey. Follow the remaining instructions in the wizard.

  See also: compatible devices with Bluetooth problems

  Hope that the information provided is useful. If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• HP 10 G2: HP 10 G2 auto connect/pair for bluetooth keyboard

  How can I configure my HP 10 G2 to recognize and automatically connect to bluetooth keyboard?  Everything works ok, but I don't remember the process to put in place.  No problem pairing or connection, but I remember configuration to automatically detect and connect.  Help, please.

  Hello and welcome to the HP support community!

  Normally, if you don't have any peripheral BlueTooth enabled is close and turn on the keyboard, the right must find each other and connect (if a successful matching has been done previously).

  I am now typing this on my old Palm BlueTooth Folding keyboard on a Tablet HP Pro slate 12 5.1.1 Android running.  She was immediately after I turned it on.

  Looking for paired keyboard settings, I see no such "connect automatically".  He just needs to connect.

  WyreNut

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• Reinstall Mac OS with bluetooth keyboard

  Can I reinstall MacOS on Imac 27 even if I only got a bluetooth keyboard?

  Yes.

  Barry

• iOS 10 Bluetooth keyboard button publish?

  -That someone knows the problem of the Home Bluetooth keyboard button in iOS 10?

  If you pair a new keyboard Bluetooth, the Home button on the keyboard works very well at the moment. However, if you unplug the keyboard, lock screen of iOS, then reconnect the Bluetooth keyboard. The button of the BT keyboard can only to wake up the screen. She can no longer trigger the Siri.

  I tested the keyboards and the next button, they all have the same problem! The same scenario works very well in iOS 9 or earlier versions.

  Logitech K760

  Logitech K811

  Foldable keyboard Microsoft Universal (model 1695)

  IOS Satechi BT Home Button

  All third party material made suggestions of mine an assumption - at best.

  Barry

• IPad bluetooth keyboard

  After installing IOS 10, my bluetooth keyboard keeps losing connection?

  Make sure that you use a compatible Bluetooth keyboard > Keyboard wireless Apple Magic Keyboard compatibility with iOS - Apple Support devices

  Configure and use third-party Bluetooth - Apple Support Accessories

• on screen keyboard disappear connected bluetooth keyboard

  I have connected a bluetooth keyboard, however, the screen keyboard on will not disappear.  Does anyone know how to remove?  I tried to erase the spotlight search and it does not work.  I rebooted and reconnected the unit without success.

  Try unpairing the BT keyboard and matching it back.

  Configure and use third-party Bluetooth - Apple Support Accessories

• Dungeon of virtual keyboard to appear when you use bluetooth keyboard

  I use a surface 3 pro with a keyboard bluetooth as the main method of entry. The recent Firefox update keeps popping up a virtual keyboard of the system on each input field. This is a nice feature to have while no external keyboard is connected. However, it is extremely inconvenient if you have a connected bluetooth keyboard.

  Please would you consider to provide a toggle button to turn this feature off or just to test if a bluetooth keyboard is connected before appearing the virtual keyboard?

  Thank you.

  Hi, if you want to disable this feature, please enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named ui.osk.enabled. Double-click it and change its value to false.

• MacBook Pro (2015) - cannot disable Bluetooth keyboard

  I bought a new MacBook Pro - 13 "with Retina display last year (2015). Everything has been excellent work until a week ago when I start my computer, the keyboard and the trackpad no longer work, as he begins to search for a bluetooth keyboard.

  I have never used a bluetooth on the computer and can only get this to stop after anywhere from 5-15 and forced reboots. Is there a way to fix this? I read the older forums and have tried to remove the Bluetooth.plist and restart the computer, run disk utility, but nothing seems to solve the problem permanently. For any help or suggestion would be greatly appreciated!

   Sys Prefs - Bluetooth - off?

• A Bluetooth keyboard for iMac can be coupled to an iPad Air2 type near the airbook keyboard use?

  A Bluetooth keyboard for iMac can be coupled to an iPad Air2 type near the airbook keyboard use?

  Yes. iPads supports BT keyboards very well, including the Apple BT keyboard.

  Make sure that the keyboard is unpaired of any other device or computer before you try to pair it with the iPad.