"No devices found, startup click on any key to restart Machine." & "audit of the media [impossible]. & ":( Your PC of Ran into a problem & needs to restart. "Error messages occur every hour.

Similar Questions

• No device found startup error

  My laptop is showing an error "Checking media fail media control.

  No device found start? Press any key to reboot the machine. »

  I was using AVG TuneUp Utilities before that happened and my computer has suggested that I reboot-since its been this list this error.

  I ran diagnostics on my computer and everything seems fine. He said: there is no error.

  Before this error, my computer was crashing with the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL smb_driver_intel.sys.

  My computer model is Windows 8 home Dell Inspiron R i15RM-3659SLV.

  I checked the hard drive and it is detected in the BIOS.

  I'd appreciate any help.

  Start Dell diagnostics - F12 to start execution.  Run the extended test - not only the quick 10 minute test.  If the player tests OK, chances are the AVG tune-up is at fault - I hope you did a set of recovery media when you received the system, because you will need it.  If you do not, you will need to call Dell for it (it's free if the system is under warranty - or you can buy it if the warranty has expired).

• Error - loading at start-up, my computer is giving a "loading error" «press any key to restart...» »

  At start-up my Sony Vaio with XP is to give a "load error" "press any key to restart '. .  Pressing a button any does not help.  I shut the computer down at least five times, and I get the same message every time. Help

  REX

  I ran fixmbr too, but you don't need to contact your manufacturer for assistance.

  It is extremely unlikely that any computer purchased at a store bought on this planet will have installed XP Recovery Console.

  It is extremely unlikely that any computer purchased at a store bought on this planet will be accompanied by a genuine XP installation CD bootable that can be used to start the XP Recovery Console.

  It's extremely likely that any manufacturer on this planet will send you an installation CD XP genuine for you can start in the Recovery Console.

  It is extremely likely that the majority of the posters on the forums is not any type of bootable XP media.

  It is extremely likely that the majority of the posters on the forums have never actually seen, possessed or otherwise come into contact with an XP bootable installation CD authentic in their lives, or if they already had in their possession, it is now nowhere to be found.

  I wonder why never support engineers offer this idea for the Recovery Console.

  (a) they do not know how
  (b) they are not allowed to post anything that isn't in a KB article
  (c) they are not allowed to post links to any place outside of Microsoft
  (d) your idea here

  You can make a bootable CD of XP (no XP media required) Recovery Console.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Remove disks or other media.__Press press any key to restart

  Hello

  I've seen a few posts on this topic but not have been very useful.

  My computer (Dell Inspiron 2200) was relatively slow and I decided to reformat the machine.  After doing that it seems the hard drive was fried in the process that I have been unable to get the machine to boot properly after the reformatting process.  When I ran a diagnostic on the computer, a message was also discussed more leading to believe that this was the case.  This is why I took an old hard drive that I had and tried to use it on the machine.  I created a Windows startup disk by downloading the file and burn a disk.  I changed the order of BIOS to move the CD drive first on the list and the error "remove disks or other media."  " Press any key to restart" continues to be displayed.  Please help me

  Thank you

  A HD is fried in any reformatting/installation process.

  You don't need to create any gain of boot floppies, you just need your convalescence winxp / installation disks to prepare your drive for installation

• I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  George in San Diego

  Assuming that Windows XP has been reinstalled just for some reason any...

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs, with, I try to attach a PDF file to emails.  Any thoughts?  Apple could not help.

  Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs when you try to attach a PDF file to emails.  Apple was not able to solve.  Any thoughts?

  It is not broken, just confused. The recipient must save the file and open it in Adobe Reader. Your e-mail application is not using Adobe Reader.

• When I click on the link while using help and Support in Windows XP, I get an error message saying "page is not available" also a filled red circle crossed out

  Original title: help and Support under XP

  The installation option "search" in Help and Support is OK, but if I try to open any underlined green/blue link I get the error message "page is not available" also a circle full red bar. This always happens in any response. Obviously something is damaged - but as you please and how to fix it.  John

  Hello

  ·         You have installed Windows XP Service Pack 3 on the computer?

  ·         You are able to browse normally in internet explore?

  This occurs if the Microsoft HTML Help control is blocked (probably by a Microsoft Update) by defining a "Kill bit" in the registry. To resolve the problem, upgrade to Service Pack 3 , which publishes an updated version of the hhctrl.ocx control.

  If this doesn't help, run the following command from start, run dialog box:

  Regsvr32.exe hhctrl.ocx

  Press ENTER

• Why my acer laptop keeps saying 'no devices found startup "?

  I was just with my laptop when it frooze upward while I was online, then it turns off. When I pressed the Start button, repeat me "no found boot device". It came with a device. How can I fix it?

  It seems that if your hard drive has failed.  Most likely, it will replace.

• Why do I get a message saying "no disc not detected - start insert an and press any key to continue", but none of the keys work.

  When I finished installing, partitioning, and all other actions prompted for installing windows 7 with boot camp, my mac restarted all of a sudden without promote me. My 32 gb SanDisk Cruzer Blade was hooked up to an external USB hub. My screen came up with a console that says something in the sense of ' no disc of starting (or reader) detected - insert and press a key to continue. " I then plugged my FlashDrive directly in the USB interface on my Mac. Then I pushed every button on my keyboard, but nothing happened. I then force reset my Mac and retried, but alas, it didn't work. My computer is stuck here and will not respond to anything else. Any help is appreciated.

  Please, please, please! Someone who doesn't know anything also how stupid it may seem. I can't return to OS x no matter what I try. ;(

• Disk error, press any key to restart

  Hello

  In the last week or so when I turn on my computer, it goes through the boot sequence, then just before its loading Windows, I get the following:
  "Disk error".
  Press a key to reboot ".
  Once, I press any button that displays the Windows Logo and Windows starts up.
  Last night I ran a check local disk, and this morning when I woke up it was back to the black screen with the message.
  Does anyone have any suggestions?
  Thank you very much.

  I have a suggestion.

  Buy a new HDD and clone the content across to the new drive using this program...

  http://www.TODO-backup.com/

  If you now, it will be a breeze. Everything will work as before and you will always have your recovery partition.

  If we leave it until the problem gets worse, you may well end up having to run CHKDSK constantly, files, folders and partitions can get corrupted and you will lose access to your recovery partition for good...

• ADF necessary validation is triggered when you click on ANY link off the page

  I have a couple of fields of text on a page and I put the validation 'Real' = required on them so that when I click on a button that calls a pageflow validation method is device when there is no data in the field.
  
  The problem is that it is also device when I click on any other button navigation or link off the page. Is it possible that I can do the required validation related only to a particular button?
  
  
  In addition, this jsff belongs to a taskflow which is deployed in Webcenter spaces so some think that the reason that has something to do with it.
  
  Any help is appreciated.

  Hello
  Make the other buttons property immediate = "true", then he ignores all validation on the client side.

  For example:-If you want to do validation on the first button's click, but you don't want to do any validation on the second button's click, then place the immediate property = "true" on the second button and you're done.

• Qosmio G20: device error - "no audio device found".

  Audio device error showed "no audio device has been detected" and seems to have lost the link to the audio device. Any advice on how to restore this lost link please

  Sorry, but your description of the problem is really more than ridiculous. Explain what is exactly the problem, and when this error message occurs.

  Do you use external device or what?

• I have HP notebook: no boot device found after the death of the computer during the update

  During an update my PC is dead, I know it must have been plugged and now boots to no device found startup please install an operating system on your hard drive

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to which typre of media you created, then click on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the system restore Windows to return the laptop to a point in time before that happen this isssue - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• Boot Dell Inspiron 15 Series No. 5000 device found

  I just bought this labtop and worked well until, after about a week the necessary computer for the update of the Bios. I closed all running programs and helped update the computer. When I came back to check on my computer it would say no device found Boot press any key to restart. I could do this several times without success. I ran ePSA diagnosis and he said everything was working with the computer. Help, please!

  Assuming that you make any changes to the default configuration, make sure that the device is set to UEFI active and secure startup is enabled.  If those who has changed, the drive does not start the system.

  F2 at startup to get and select.

• Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it. No idea how to solve this problem?

  Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it.

  No idea how to solve this problem?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Do a system restore. Choose at least 3 days ago when you did not have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.