No found boot device. Press F11 to restart the machine

I have a Dell all in one computer and I just replaced the hard drive.  I have no operating system installed.  When I turned on the computer after the installation of the hard disk, I got the message "No boot device found".

What is my next steps?

Install the Windows operating system?

Exactly what AIO model and what version of Windows?

If you have not formatted the new HARD drive and installed Windows, this is exactly the error you will get.

You must insert the disk to reinstall Windows in the optical drive, then power on and press F12. Chose the optical drive from the start menu and follow the prompts to install Windows after it starts from the OS disk...

Once installation is complete, you will need to install all the hardware drivers, in the correct order. So make sure that firewalls and antiviral software are running and go directly to the website of MS update to download/install all updates for your version of Windows.

Tags: Dell Desktop

Similar Questions

  • WLAN file Device Manager, until I restart the machine and deletes the wifi while using it 3 times a week and no diagnosis to see where is the problem

    I think someone put the wrong card in this or changed when I bought it was 3 weeks ago. dw1510 card wlan and broadcom driver date tried 2008 update and does not say supported.makes no sense not supported. Why wifi falls and have to restart are beyond me. I ask those with same past answer questions and if your card is different from dw1510 tell me your card. LAN hardware card. AND WHEN I TRY TO INSTALL THE DRIVER FROM DELLS FOR HIM, IT SAYS HARDWARE NOT SUPPORTED. GO FIGURE?

    Hello

    Welcome to the Microsoft community.

    I understand that you have a problem with WLAN.

    To help you better I would like to know the details below.

    1. What is the brand and model of the computer and the Wi - Fi router?
    2. You get no matter what code/error message when disconnecting a Wi - Fi connection? If Yes, then give the complete error message/code.
    3. You did changes to the computer before the show?

    I ask you to perform the following steps of the Microsoft Help article and check if it helps.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Meet us with results to help you best.

  • Not found boot device. Hard drive (3F0)

    Hello

    I have a HP Pavilion 15 laptop n203ed 8 64-bit windows-based and have updated my bios.

    About a month ago, I bought an SSD and improved my HARD drive, it worked fine until yesterday, I started getting the error message "not found boot device. Hard drive (3F0) '. I get this error message whenever I restart the laptop, but when I load the bios, change nothing and then tap on save and exit suddenly it restarts again the error disappeared and everything goes back to normal. Until this happens again in a few hours. I've had 4 times now.

    My question: is this a hardware problem or software, I would return the SSD? or could it be something else?

    Thanks in advance.

    Found answer here https://www.youtube.com/watch?v=j3wkwYB75bg

  • HP Pavillion l 17-g192dx: not found boot device, please install an operating system on your hard drive.

    ProdID:V0Q01UA #ABA

    Hello, so I performed a reset that restore my computer to factory settings, I have chosen to erase all files. I've done this before, and everything went well. What was going on, it was my disc useage was at 100% a lot and that something was wrong with my computer then I factory reset it. While the factory reset is 44% in "resetting your computer" and the next thing I knew I had 2 options, stop or start with advanced options. Well, I chose to stop it, 5 minutes later, I turned it back on and I ran a SMART check has no that was the ID # 9367LW-86J89N-MFPX7G-60BR3 followed by the product id that is shown above. He said that when I start to Boot Device not found, please install an operating system on your hard drive. Followed by the hard drive (3FO), I can only click f2 and it gives me the link to visit the Help Center. The computer saying that it did not have an operating system was not the first alert, that I had, it was something else saying there was an error of hard disk which then became not having not not an operting system. I tried to go to f11 and go in this way, but regardless of what it always comes back to the screen that shows the found boot device, please install an operating system. Help, please! Thank you. in advance.

    He was sent to HP they will solve this problem, my warrienty coverd.

  • Pavilion Notebook 15-p204na: not found boot device

    I get the folowwing message:

    Not found boot device

    Please install an operating system on your hard drive

    hard drive (3F0)

    I did a restore default BIOS, but it did not work.

    @Ram14: see is something in the linked thread help: ' Hard Disk - BootDevice (3F0) not found "error - HP Support Forum's - 2443931

  • Not found boot device

    My laptop won't start. It is said the test of hard drive failure and the found boot device (3f0). I ran tests start, tests and test the hard disk without success. The computer is no longer under warranty. It is a HP mini.

    You are the very welcome.

    Please give me the model number full of your mini, so I can watch what size HARD drive you need to buy, if a recovery media is available for purchase and for me to be able to provide the link to the service manual.

    Normally, removal and replacement of a hard drive are not too difficult relatively speaking.

    I would say that almost everyone can do.  I don't know that much about mini and how disassembly is required to get on the hard drive.

    On mobile phones more regular sizes, it is very easy to remove and replace the HARD drive.

  • The screen message: not found boot device

    I get the following message on my HP Pavilion dv5-1200: "not found boot device. Please install an operating system on your hard drive. Hard drive (3FO) '. Can anyone advise, please.

    I give it a go without having too much hope that it will work. Once again thanks a lot or your valuable support.
    Rabia

  • HP 2000 D1E88UA #ABA: not found boot device

    Hello. My computer does not turn on widows. It is the found boot device. I have the default installation is does not work please help me and tell me how to return to my windows. (w 8.1. 64B

    Can you get in the diagnosis (F2) or BIOS (F10) to run a test drive? Chances are that the hard drive has gone wrong.

  • Not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system

    HP Pavilion Dm1 4000au, windows 7 Home premium 32-bit, error: not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system diagnostics, how do I 3Fo system to be installed my notebook/laptop...please help me...?

    If F9 does not run the diagnostic, then most likely to replace the hard drive.  Once the new drive in place, start the recovery DVD series that was made when the PC was new.  If you do not make them, or they are lost, order a new set of HP.

    See here: http://support.hp.com/us-en/document/bph07143

  • HP mini 110-3100: not found boot device

    Hello..

    Why when I reboot my hp mini 110-3100, he says this not found boot device, please install an OS on your hard drive. so I will try to run the hard drive test and it say the drive does not exist.

    How I solve this problem?

    I try to format it, but I can't. Please help me. Thank you

    It seems that the hard drive has failed and needs to be replaced. Of course, it is possible that he has lost all simply a secure connection if the Mini is transported/rushed. Remove the Panel covering the hdd and check it - unplug, plug back in.

  • laptop HP 2000: not found boot device

    I was on exploring and the computer was blocked off when I turned back it had error messages
    Not found boot device
    Please install an operating system on your hard drive
    Hard drive (3f0)
    When I do a test of hardware I get these messages
    Intelligent control - not installed
    Drive of shirt - not installed
    I've used this laptop 3 times I've had 15 months what could I have done and what I can do to fix

    We will need your complete model number to help you find the recovery disks.

    This will show you how to do the replacement:

    https://www.YouTube.com/watch?v=Jioi3_g1x6E

    drive hard $50

    Another option

    Post back with the complete model number.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • not found boot device. Please install a drive of system.hard of operation (3FO) past all the hard drive test

    not found boot device. Please install a drive of system.hard of operation (3FO) passed all the test drive I get this message after the recovery disc 1 stops at 36% and tells me to put in disk 2, I just discovered that my grandson was trying to help me by resetting my computer from factory settings off he thinks about 27% complete , it is only 8 and just trying to help this computer is only a few weeks was a Christmas gift its my fault for complaing about windows 8, can someone help me please thanks in advance

    I solved this problem myself thanks all syudents there to post what you've tried I went to bios and disabled the startup enabled legacey mode sucure tried to go to the Boot Manager it was my boot devices tried to use recovery disc recived the same message I have reset to factory settings and was able to reinstall windows normally

  • Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

    Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

    Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

    I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

    First thing I did was a fast hard drive test and it happened.

    I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

    Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

    I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

    Thanks Bill

    Hello:

    See if you make your own plain W8 x 64 installation media works for you...

    Download the ISO W8...

    https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

    Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

    http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

    If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

  • "No boot device, press a key." Unable to access BIOS. Does not start a DVD. USB not a startup option.

    How can I get into the BIOS or boot from a Live CD or the Windows installation disk?

    Here's the background info:

    Laptop: Acer TravelMate P273-MG-6608

    OS: Windows 8.1

    Actions leading to the problem:

    I tried to encrypt the drive using BitLocker.

    On reboot, I get the error message "no boot device, press a key."

    When I hit a button, I get a boot menu that lists the HARD drive, DVD player and optional network initialization.

    Booting from either the HARD drive (of course) or DVD does not work.

    The discs I've tried:

    Acer system restore disk

    Restore Win 7 disc

    UBCD

    Hiren

    Ubuntu installation (Saw elsewhere on this forum that worked for someone).

    Methods that tried to access the BIOS:

    Turn on/off the laptop while holding down the key F2.

    While tapping the F2 key about once per second.

    Same thing with the delete key.

    Same thing with F10.

    Same thing with Alt + F10

    Same thing with F8.

    Each method has tried several times without success.

    Action taken:

    Removed the HARD drive and connected to a work computer. In doing so, I was able to recover all my files.

    Player settings appeared to all be correct. Drive letter C:, file NTFS format, primary partition, the recovery partition was there as well.

    Re-inserted the original in the laptop HARD drive - without success.

    Formatted the primary partition on the HARD drive, put it in the laptop, the same results.

    Formatted the entire HARD drive, put it in the laptop, the same results.

    What I see as options:

    1. format the HARD drive outside Windows, for example using Hiren's Boot CD and Gparted.

    2. in so doing, and imaging of the player with a 8.1 for Windows or ISO 7, if I can find a.

    3. If I can get into the BIOS, I should be able to get the laptop to boot from something. Or disable UEFI, which I think is part of the question.

    Any ideas on how I can enter the BIOS or get the laptop to boot from the HARD disk or a floppy disk?

    Solved.

    I downloaded the required BIOS file of:

    http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.08_A_A.zip?acerid=635114527449782829&S...

    Once downloaded, I extracted the files from the archive .zip.

    Then I low-level formatted a disk USB flash with the FAT32 file system.

    Once this is done, I copied the files from within the archive on the USB flash drive.

    With the USB stick inserted into the laptop, I turned on it while pressing ALT + ESC. This brough to the top of the screen where I choose to hit F2 for the program installation, or F12 for the boot menu.

    I pressed F2 and the BIOS came admin screen. Then I yelled something like ' Hallelujah! "

    I changed the MBR to the STRANGE device, put in the first disk to factory default retrieve and press F10 to save and exit the BIOS.

    The Acer splash screen went up, and the laptop booted into the recovery disc. It should work here.

    I hope this helps someone in the future.

  • Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

    Hello world

    I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

    I am trying to print and get the message "...". You must install a printer.

    I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

    Can someone help, please?

    Thank you very much

    WestAusShortie

    Hello West,

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem may occur if the print spooler service is not running.

    Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

Maybe you are looking for

  • HP MINI 1000: HP MINI SYSTEM STOP FATAL ERROR. CNU9302RM6. Need password to connect!

    HP MINI SYSTEM STOP FATAL ERROR. CNU9302RM6. Need password to connect! Please someone SOLVE THIS PROBLEM. I HAV NOT OPEN MY PC one YEAR, please help me if you can? Good day!

  • How to close the Hotmail account

    There is a Microsoft e-mail account (Windows Live Hotmail) associated with your account, so you can't close your Windows Live account immediately. To close your Windows Live account, you must first close your Microsoft e-mail account. After a period

  • Z5 frozen with screen, restart

    I have a Sony Xperia Z5. While using it tonight, it froze with the screen on. Press and hold the power button was unable to restart the phone. Using a sharp object on the slot power button SIM also failed: no vibrations, no change to the phone. The b

  • Konika Minolta Pagepro 1350 printer does not work

    I have the Konika Minolta pagepro printer connected by USb port to the Desk top Acer 1350 and the printer does not work. Display error message - sending to the printer and do not print anything.Please help me... Truong Hai

  • I have 10 windows, my child has windows 7. How can I get family safety to work?

    The subject says most of it.  I have used parental controls to set up parental controls Web site, however, it is said that it applies only to the windows 10.  My child's computer to Windows 7.  I tried to connect from his machine to implement control