No good visualization of files imported into PE7 (AVCHD, VOB and same avi).

Similar Questions

• Audio files imported into iTunes shot in Streaming Audio

  I use iTunes to organize the audio files I've created with GarageBand and create my own albums.  iTunes game allowing to synchronize these albums to my four Macs without problems.

  It worked until I signed up for the trial of AppleMusic plus iTunes game.

  Suddenly the iTunes library on three of the four Mac Sync showed a number of my own songs like 'Apple Music Audio File'.

  When I create a smart playlist with the rule:

  • Artist contains Leonie and iCloud status is Apple music

  I find 17 of my own creations that are all of a sudden Apple music.

  

  And after the end of the trial of AppleMusic I couldn't play them any longer. When I tried, I got the prompt to renew the composition of Apple's music.

  turingtest2 helped me to clone a good library for my other four Macs and start over.

  This helped for a month or two, but now more and more my own audio songs are transformed into 'Streaming audio' for a change, is no longer Apple Audio music file with the iCloud status 'pending '.

  

  I use OS X 10.11.5 on every Mac, with the new iTunes.

  Should I try to restore the iTunes Library again on three Macs synchronized from a good copy master?

  EEK. I've seen iTunes decided to process the files on the local network who have been referred by a UNC path as internet stream before today. What I don't understand is how an internet stream is supposed to get loads of iCloud.

  I think back to a well known version of the library is the only way to solve. What do you see as the location on the tab file for one of the audio tracks?

  TT2

• The raw files imported into LR CC disappeared after upgrade to El Capitan

  Hello

  Im a user Cannon shooting Raw (CR2) files.

  I kept my brute in retouched and external disk on my mac by LR CC.

  Recently, I upgraded my MBPR at El Capitan and the things happened. Almost all of my raw files I imported into LR disappeared.

  I can't even find raw files in the Finder.

  Meanwhile, the exported JPG files are still there. So, I'm so confused what happened... Is it Apple or LR or my external hard drive?

  Thank you very much.

  Your image files are on an external drive, they are not in Lightroom. Check your external drive for permissions issues and the format of this player. It must be in Mac OS extended (journaled) format. If it's a different format, as Windows NTFS, then you may need to Add On for OS X program to write this drive (you had such an Add On that was removed or disabled by the upgrade of the El Capitan).

  El Capitan is a new Apple Mac system running. It may or may not wear on some of the settings and add on features, you are so use to with the old version of OS X. One of them is the ability to decode, View/view, the Canon RAW file format in the Finder. But these RAW files should always be located on your drive external and displayed in the Finder with a generic icon of any type and ending with the file extension. CR2. You should tell the Finder to display file Extensions. you do this in Finder preferences.

  He is always Apple. They do things without any consideration for their users and other software publishers.

• Save the file imported into oracle directory

  Hello.
  I'm on a project where I need to import a CSV (imported by using app APEX 4.0.1) in a specific oracle (complete and functional) table, and then save the file imported to the server.
  This part of the savings on the disk where I have my doubts.
  I know that I can use utl_file to write the file to an Oracle Directory, but that I have to open the blob (file) twice: one for import to the table and the other to write to the disk - because I want to just save if the file is successfully imported.
  
  Is there a more direct way to do this?
  
  Thank you
  vssantos

  NO, you could use an external program to C and then to write a wrapper for an Oracle to store the BLOB in an Oracle Directory. : http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:6379798216275

  Thank you

  Tony Miller
  Webster, TX

  Time passes fast like the wind, but the flies from fruits such as bananas.

  If you answer this question, please mark the thread as closed and give points where won...

• No audio in MOV files imported into PE 4

  I transferred to my computer (a PC running Windows 7 Professional 64 bit) a video project shot by a friend who is a professional filmmaker. It converts video files its original MXF files mov using Acrok MXF Converter. Conversion divide the original 29 files MOV video are all less than 1 GB each. When I click on any of these files in my computer, the file opens and plays in Windows Media Player. Great video and audio. No problem. However, when I import these files into first Elements 4 (get the media > files and folders, etc.) and put them in the timeline, there is no audio track.

  If I click on the properties of one of the files listed in the project of PE4 field, the list of properties said that there is an audio track:

  > Audio track 1 contains 1 or audio data types

  > Audio datablock #1

  > Format = 16 bit - stereo

  > Rate - 1.0000 Hz (it's the only thing that seems a little weird. Should be 48 000 or 44 100 Hz)

  > Compressor = MPEG-4 low complexity AAC

  Suggestions?

  The answer is probably

  1 first Elements 4 cannot correctly interpret the file

  In the meantime, I learned that my filmmaker friend got inadvertently files with a 5.1 surround sound. Obviously Windows Media Player can recognize and play this audio, but not PE 4.

  He converted a test file, I downloaded and tested in the project of PE. The audio track appears and plays.

  Thanks for the help.

  PROBLEM SOLVED

• How can I add files imported into sequences using ExtendScript connection of Premiere Pro?

  I really want to know the answer to this... I'm trying to create a script (in ExtendScript for Premiere Pro) that will load into the specified video files, attach them to the specified start and stop time, place it in a sequence and then export the resulting film.

  I understand that Adobe has no official documentation on the scripts for Premiere Pro, so I worked from the data (in the ExtendScript Toolkit or ESTK) browser and a collection of handy references I found to links like this:

  http://WEBCACHE.googleusercontent.com/search?q=cache:http://cssdk.adobesites.com/SDK/2.1/d ocs/WebHelp/references/csawlib/com/adobe/premiere/App.html

  (You can replace the 'App' with other class names, but they must always be properly capitalized, as a 'Project' or 'TrackCollection'. Pages list properties and methods to the classes, and are the only place where I was able to find what kind of parameters/arguments methods expect.)

  I loaded correctly in the CSV file that specifies the information required. I also know how to import video files and create a new sequence (as explained here: http://forums.adobe.com/thread/1177191). The pain that I am experiencing now is to get the imported files properly cut and placed in the sequence. (I see that the activeSequence has methods like setInPoint and setOutPoint, but that doesn't seem to translate into the correct trimming to export).

  Here is my code (with comments to show the flow of the global script):

  #target premierepro var myDir = "G:\\directoryWithVideoFiles\\"; // defined "indexOf" subfunction here // ***** begin main body of script ***** // (dataRuns has fields runName, startVideo, startTime, stopVideo, stopTime) // Import video files listed in dataRuns var vidFiles = new Array; for (i=0; i<dataRuns.length; i++) { if (indexOf.call(vidFiles,myDir + dataRuns[i].startVideo + '.MPG') == -1) { vidFiles.push(myDir + dataRuns[i].startVideo + '.MPG'); } if (indexOf.call(vidFiles,myDir + dataRuns[i].stopVideo + '.MPG') == -1) { vidFiles.push(myDir + dataRuns[i].stopVideo + '.MPG'); } app.project.createNewSequence(dataRuns[i].runName,''); } app.project.importFiles(vidFiles); // at this point, for each run (called runName) I need to: // - take a clip of the startVideo from the startTime to the end of the video // - take a clip of the stopVideo from the start of the video to the stopTime // - put clip 1 at the beginning of the associated sequence, & clip 2 right after // - export the sequence as a new video file

  The example PProPanel shows how to import files and make the sequences. The missing part (from above) = there is no supported method for adding clips to sequences.

  Tim, if you would, please write to me at my day job [b b b at adobe dot com] an overview of the workflow (s) you wish to support, and I can better frame.

• My photo files import into my music folder?

  For some reason every time I have import images from a camera or cd they go to my piture folder and then a copy made in my folder of music as well.  When I add a new music she lands in my photo as folder.  I have only had this problem since I have re installed Vista after my hard drive crashed and was replaced.  Anyone have any ideas?  Thanks in advance!

  Hi Brianx45,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Looks like this would be due to corruption of the user account.

  I suggest that you create a new user account and check if the problem persists in the new user account.

  If the problem does not persist in the new user account, then you will need to transfer the data from the old user account to the new.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to lengthen the compositions Ch imported into After Effects?

  I move the long good enough learning Ae + HP, but now I've hit a really weird roadblock. Here goes:

  
  

  I created a clip of a minute of the action puppet head in Ch, it exported and imported through the Script in Ae, but now its only 31 seconds...

  
  

  The amount of images in the file Ch corresponds to what was the number of images of c... My project Ch and Ae are 12 fps so I don't think that should be a problem, and my Ae project is 1 minute... I'm so lost.

  So I guess I ask two questions; 1. I do something that can cause a clip of Ch 1 minute 31 seconds once imported into Ae?

  And 2. Is it possible to extend the Compositions? I just engineering audio where you can just copy a song file and add at the end of the first Ae but does not work this way.

  Any help would be great appreciated, I feel that I have hit a brick wall with this...

  Just ask if I could give any extra info, screenshots, I'm happy to do

  I think I found the culprit! When I right click on the publication file and choose interpret footage, setting the frame rate assuming the rate set at 30 fps

  After I changed it, I remove my composition and dragged the file Braxton in Compositions, it was the minute complete 1!

  Thank you for spending time to help me KJerryK again, you have directed me in the right direction.

• Lines undulating AVI when imported into After Effects

  The file I'm trying to use a video file that was created first by capturing video from a DV tape and rendered in Adobe Encoder as a compressed AVI. AVI looks very good until it is imported into After Effects.

  

  This is a good example of what the appearance of lines as the most notable are the lines near the net, the upper part of the net and the coast line up to now. This is actually a shot of the first, when this image is displayed (small size) here it's the same thing I see in After Effects.  I guess that there is a problem in the settings when I create the AVI file and the configuration of the After Effects project. The problem is that I know almost nothing about After Effects and only a little more info on first. If someone could give me advice (that is entered as the best possible) as to what could be causing this and how can I correct, it would be fantasctic

  The image below is a screen After Effect

  

  File--> interpretation of sequences--> hand. Hose off fields, if you want it display is sharper. Everything is perfectly normal. Compressed still images will expose artifacts and the color space conversion and various display modes between the programs make them more or less stand.

  Mylenium

• Photo library on mac was emissions additional no duplicated and then imported into Lightroom 6 PROBLEM: all duplicates appear (capitan OSX). Help me with this please!

  I imported all my photos in photo library on macbook OSX capitan. The photos were additional emissions not duplicated using power foto and gemini. This in the photo library. After checking, I have 48,000 photos, 80,000 duplicted >. After that completely eliminate the unwanted duplicate photos I import to LR6 by drag and drop the trump card in the library. Then all photos, including the deleted ones appear.

  Any solution or another way to import? photo for mac contains all my data being sought.

  This file did you import into Lr?

  And I would say you will find the duplicate in Lr, note the file name and then search the photo library to see if you have multiple instances of this photo. You cannot use Spotlight; you will need to use another utility like find easy.

  But you are right; If you have deleted them permanently from the "recently deleted" album they should be in the trash; you could confirm that as well.

  And use 'Show in Finder' alleged images duplicated in Lr to see where the copy is stored; that should also give you an idea of why it did not work.

• Why records are imported into Lightroom remaining gray?

  Remaining files imported into Lightroom 5 gray, why? I am a fairly experienced user of LR5 and have been using it to organize my photos for a few years now, and I've never had this problem before. It happens when I import directly from my card using a card reader and also if I download on the computer and import from there. Same result, so be it: once I have imported the photos folder arrow remains gray. I updated the folder locations and synchronized folders, and there is no change - folder stay grey arrows. What happens and how can I solve this problem?

  Thank you.

  Are the grey icons or the grey triangles? If the triangles are gray dark, it means simply that there is no subfolder in this folder. If they are light gray, it measnyou can check the triangle and see the subfolders in this folder.

• My JPGs of montages of CR2 in CS6/CC are not imported into LR5.

  My JPGs of montages of CR2 in CS6/CC are not imported into LR5. Bridge and explore are ok. Tried to reimport but LR5 cannot see them.

  File numbers are the same as original CR2 but have the jpg extension. TIFF and PSD seem ok. Can anyone help please?

  Lightroom put them where you instruct. You are responsible for this. You have options for adding that leaves the files where they are on the drive or move where files are moved via Lightroom to the destination you select or create.

• Winmail in vista mail export then problem of file name different when imported into windows live mail?

  win mail in export Vista mail then face the different file name problem when importing into windows live mail?

  I have dell laptop and vista 32 - bit os worm and now I change my laptop and have os windows 7, but when I export the name of folder windows vista mail rename (long file name) so when I import in windows 7 in the windows live mail client it is not imported as well as in win mail. folder and sub-folder is not in good
  the path folder and subfolder and subfolder; s subfolder is not to this strucherd only in win mail in vista. so, how to solvedthis problem and I want to win software mail in windows vista then where to download in windows 7. PS please help me I have the database of records of mamy creat inside.

  Hi ChintanThakkar,

  Since you are facing problems with its import to Windows Live mail, you can publish your application in the Windows Live Forum for assistance.

  Windows Live Support

  http://windowslivehelp.com/solution.aspx?SolutionID=0f26bfb0-7799-46a9-A969-dfc8186110f7

  Hope this information is useful.

• QuickTime import into single audio file

  I made a video After Effects Quicktime last night and tried to import into Premiere Pro today but PP is only to import the audio. I checked the file and the video is there and it works very well in a drive and in After Effects. Premiere Pro, on the other hand...

  I point out that I did the last update yesterday and it's the first time to have this particular problem. Anyone else having this problem?

  Well, I found a solution of sorts. The real project was yesterday, so I had to go forward and dynamic links to the file in After Effects and just make it through all of creation. So it's now out of the way. My boss yesterday as well updated and it has had a similar problem. For him, the first said that he has not found a certain video file. He would later copy the project and all the goods to a different folder/location and that solved the problem. I tried to move the Quicktime file, but not the entire project. This morning, I opened a new project and attempted to import the same Quicktime and he did very well.

  The culprit, seems, is the one that made her ugly reappearance after many great updates of Adobe. We had started these projects in the previous version, then set to level and attempted to continue/complete the project. For some reason, first gets a bit confused by this.

  Thanks for all the help!

• When I export my bookmarks to an html file, I get a file json instead. How to make a html file that I can import into safari?

  When I export my bookmarks as an html file, I get a file json instead. How to make a html file that I can import into Safari?

  Use bookmarks > organize bookmarks > import and backup > export HTML and make sure that you give the file an extension of .html file.

  See also:

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
  • http://KB.mozillazine.org/Export_bookmarks