My Mac communicate with printer

Similar Questions

• Photosmart HP 5510 - cannot communicate with Printer Check Utility does not! Help

  I work with Windows 7 the error message I get is unable to communicate with the printer. I've never had a problem with a printer. First night worked incredible, all the software is downloaded on the computer, but then to go print to date it has not worked. REBOOTED EVERYTHING, router wireless, computer and printer. Then reconnect the printer to the router through that says the manual. FINALLY it starts printing, waited about 30-45 min went print again and of course, it did not work.

  I tried to do the audit - States utility I am connected online time computer and printer to the router. From what I understand there is a problem with the printer-computer connection. I bought this specific printer because it is wireless and highly recommended as the brand HP, now I wonder if it was a big mistake.

  Hello

  I have the same setup as you, HP 5510 connected to BT HomeHub 3.0 and have the same symptoms.  There is a simple solution that has worked for me.  All you have to do is press the "Restart" on the back of your router, wait for it to complete its reboot sequence and for all 3 lights on the fron illuminate in blue.  Following this fixes also a common problem I have with AirPrint where an Apple device cannot find the printer not working do not.  I hope this helps...

• error message printer 7510, 'Impossible to communicate with the printer' I can't print from my desktop, laptop

  7510 HP e-All-in-one-C311a printer, Windows Vista, giving following error message when I try to print from my counter top "Unable to communicate with printer" also portable print request print not and my iphone does not find the printer.

  has run the wireless network, no problem not detected test results

  the status of the printer report, network status: ready, connection type: wireless

  has run HP page configuration, all good here

  Thanks for your reply, I read one number of other questioned posted here, and numerious corrections was to unplug the router, so I tried and it fixed the problem... once again thank you for taking the time and answer my question.

  Jimmie

• Create PDF from scanner 'cannot communicate with the printer.

  I have browsed the forum and saw no answers to the questions posted here on this issue.

  When I go to create a file PDF of Acrobat X Pro, I get the following error message: «Cannot communicate with the printer...» »

  I confirmed that the printer works with other Adobe products. I installed the latest drivers, latest version of Acrobat X Pro and the latest version of Mac OS X. rebooted the computer several times. I deleted the old TWAIN files to a previous scanner. Followed others advice and useful tips on what might not work.

  Someone on this forum who has this problem managed to solve this?

  Hi amy-kpwest,.

  I would like to know the exact point of Acrobat & OS X installed on your Mac version?

  Try the steps mentioned in this document KB issues in Adobe Acrobat troubleshooting scanner troubleshooting

  Kind regards
  Nicos

• Unable to communicate with the printer HP 4630

  Continue error message of "Unable to communicate with the printer." Even when connected by USB.

  Have reinstalled the software several times, checked the wireless (no problem), printed many pages of configuration directly from the printer.

  I keep trying to add the printer to my preferences. One thing is that it will only add like a scanner or fax, a PRINTER. It is also called Hello Scanner. Why can't I add as a printer?

  Now, it will not also let me COMPLETE reinstallation of the software, it freezes at the section add printer and I can't move forward. So frustrating...

  Help!

  Hi @PKahn

  It seems that the computer does not recognize the print driver.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Unable to communicate with the printer hp deskjet 1000

  I have used this printer for almost 2 years and problem say never FAILED before... forst my text printing is distorted then he showed in offline mode and later its says printer is ready, but when I give the command of printing... it said 'cannot communicate with the printer.

  Pls help!

  My problem was solved by removing and reinstalling the drivers... .any way thanks for your help

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Aspire laptop will not connect to the wireless printer, he said: he can't communicate with the printer

  I have a laptop sucks and when we first put in place it would print to the printer wireless, but now he says that he cannot communicate with the printer. I know just enough to get me in trouble with computers. Any suggestions?

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. which version of the Windows operating system is installed in the computer?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you use Windows 7, then I suggest you to go through the steps in the link and check.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• SE error message saying the printer cannot communicate with the computer cause of blocked files.

  Original title: DRIVER of PRINTER BLOCKED

  A COMMS. ERROR MESSAGE ME SAYING THAT MY PRINTER CANNOT COMMUNICATE WITH MY PC. AFTER COMPLETING THE USUAL HARDWARE CHECKS THAT I USED THE SERVICE CENTER OF DELL ONLINE THAT REMOVAL OF TWO STATES ' DLEACOMS. EXE' AND ' DLEAWBGW. EXE ' MUST BE RELEASED TO ALLOW MY PRINTER TO WORK.

  I SEE NO REFERENCE TO THESE FILES IN THE WINDOWS FIREWALL AND TO THIS DAY THE ONLY WAY AROUND THIS PROBLEM IS TO REMOVE THE PRINTER AND REINSTALL, BUT IT WORKS FOR A SHORT PERIOD. I USED (BY REMOTE CONTROL) THE STATION OF SOLUTION DELL THREE TIMES BUT EVEN THEY EVENTUALLY REMOVE ALL AND REINSTALL THE PRINTER.

  SOMEONE HAS AN IDEA HOW THESE FILES CAN BE UNLOCKED?

  I suggest to disable CAPS LOCK key since your message is all in the capital and difficult to read. Have you tried to add to the exception in the Windows Firewall? Try also to change your network connection for work or at home instead of public. Also make sure you installed the latest version of the driver and are compatible. Also try to run the tool:

  http://support.Microsoft.com/mats/printing_problems/

  If the problem is not resolved, contact Dell customer service.

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880

• Error "" unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  "Unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  Original title: how to install the printing software to solve the error message?

  Hello

  Follow the troubleshooting steps in the following article and make sure that port 139 is unlocked:

  Windows Firewall may block some programs to communicate on the Internet after you install Windows XP Service Pack 2

  See also:

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  Note: Information provided in the article applies to Windows XP with Service Pack 3 (SP3) installed.

  If you use a third party firewall, I recommend you contact the software vendor for assistance.

• HP1515: MAC: unable to print with the black print cartridge only

  I would like to print the document with colors black and white. There are two options of color paper Type/quality. I tried to use the black cartridge grayscale mode only. However, only the white paper printed.

  I checked the supply level of ink that are in good condition (they are in any case the new cartridge).

  I also tried the high quality grayscale Mode. Things have been printed, but the result was unsatisfactory because of the color of melted from the police. The color of the police were too light being visible.

  What I can do to make sure only black and white for printing. No gray color is fine.

  Hey @yy1992,

  Welcome to the Forum from HP Support.

  I see you have a problem with print quality with the all-in-one printer HP Deskjet Ink Advantage 1515. I would like to help.

  The printer makes a decent quality copy from the front panel?

  I recommend you try two Solution in this article from HP. It is oriented towards users of Mavericks, but it should be pretty close to what you see on your Mac. Note that you can run the utility of cleaning printheads up to three times if you do not see a clear improvement immediately.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick