No HPA drive detected a button press to start... try to reload xp on advent pc reinstall drive
PC crashed because of the virus, some ago.trying of time to reload xp from recovery disks. Windows Welcome screen appears briefly and then blue screen (stop error 0x0000007B etc.) told me to run the test for the virus, which can that I can not enter the system. tried new now black screen with no disc HPA detected.have you press the ignition key, but nothing happens.
Hi Andemato,
You receive the STOP error: 0x0000007B installing, for various reasons. You can also access the links below and follow the steps in the article to resolve error STOP 0x0000007B on your computer and try to install the Windows XP Recovery disk form.
http://support.Microsoft.com/kb/324103
Hope this helps and let us know the result.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Not ' on' button pressed, then press on + or - keys to adjust the brightness of the screen on HP10BII +?
Just got a new unit, and one of the first things after how to turn it on, in the getting started manual, it's that if we push the button 'On' and then hit the + or - less buttons, it adjusts the brightness of the screen. On my 10BII + does nothing... so I wonder if I have a defective new out of the box. So far, all the rest, seems to work.
Thanks in advance for everyone would be can confirm it should work.
I can confirm that the 10BII + adjusting the contrast has very little effect.
When you look at the screen at a low angle, the number "off" and the lights can be seen to slightly increase & decrease the contrast.
For normal use, the contrast setting has no useful effect.
.
-
ElliteBook 8460p will not be running when you press the Start button
Hi Ant classmates.
I am facing a problem with my 8460p ElliteBook. When I press the Start button it won't start and I need to apply some mechanical vibrarions so he reacts to the button. I guess that there is a problem with a connection inside. The thing is that he does not always fail, but it happens more often. I'm afraid to send it to HP support and resume with a message like "the problem didn't see the - up." I'm close to the date limit of warranty, but I need my laptop for 3 more weeks for professional issues. What should I do?
Thank youHello Angelica,.
Welcome to the HP Forums.
I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can click here for the link.
http://h30499.www3.HP.com/hpeb/
Thanks for posting on the HP Forums. -
Stop an event on a value or a button press signal
When programming for an event through a Structure of the event, how do you handle the events that are to be triggered by a value or a button press Signal when more processes must be treated within the same event? Take a look at the area of change: Sample Test (5 cases) value. I've stopped coding since I didn't have 4 structures of different cases.
I would like your suggestions.
Eric1977 wrote:
It should work, Jeff. Thank you.
Question - can I do the loop of the consumer a Sub VI (because it is large) and keep the producer with the Structure of the event in the hand VI?
You can certainly. What would be a champion
-
Original title: Startup problem
When I press the Start button, flashes very quickly, and the logo of the operating system and then flashes windows very quickly, then connect to flashes of password and then the screen goes dark (the monitor is turned on) and nothing more. Before if I turned off the computer, the sequence starts returning to normal and I could log on. Now, I only get that quick flashes and then nothing, what can I do to log on the computer?
Hello!
I had a somewhat similar to this problem and that's what I tried.
He temporarily stabilized my problem but I have a serious type of divorce
problems with my beloved once Windows 7. However, in your case, it may be
the solution.
This is the procedure:
(1) power on your PC or laptop
(2) when he started, start pressing and releasing the F8 key till you get the windows
Fix the Page (I don't remember the exact name, but it's a screen with many options).
(3) among the options is "Last known good Configuration", click it. See if that fixes the problem.
(4) If this does not work, then you need to try other options, namely:
(A) the Startup Repair
(B) the system restore
(C) verification of memory
(D) command prompt:
(The last option would have been a godsend, but it does not work in the console command prompt.)
I'll tell you about it...)
If all the above methods fail, try this method (it worked for me temporarily). This method is an option only when you
are able to access the above page and when you have administrator privileges. Then, when you're on the screen above, you will see these options:
Safe mode
Safe mode with network
Choose the second option. If all goes well, you will be at the level of the office. On the desktop, right click the command prompt icon. If you don't have a shortcut cmd, no problem. Press start and type cmd or command. Right click on cmd and then click "Run as Administrator".
* Now in the command console, type chkdsk/f/r (the space after the chkdsk command is optional). You may get a message that you can schedule chkdsk at the next restart, treatment is (Yes).
* Then, in the same type of console sfc/scannow. If all goes well, it will rectify errors of all the files on your system.
Note: If you please ensure that your battery is 100 pc loaded before you try it. or better yet, let him charge while you do this.
Keep me posted.
All the best!
Abgrall
-
Question when-button-press trigger?
Hello world:
I have a question:
When I double click a button (level [when-button-press trigger] of the object)
fires 2 times?
I agree with you.
But the 'good' solution depends on the developer.
Maybe the simple solution, even if they are not the best, is appropriate for beginners, because it will make fewer mistakes.
Maybe working with flags, etc., is not for beginners.
Kind regards
Zlatko
-
problem with shutter release when button pressed
Hi all
When I'm doing a commit_form when-pressed shutter button, another window will appear
Save button(When-button-pressed) relaxation
So, when I press button Save when there is no change, then another (advanced search) window appears as soon as I click the button Save. Can someone explain to me what is really wrong.coomit_form;
Any help is appreciated,
Thanks in advance!Sandy wrote:
In the RHCCUSTDET block, I'm saving database details. So, if I put this block as a block of data non-base will be how to save data in back-end?My details form:
Header block 1)
--> 2 pieces of text (customer name, customer number)
--> 3 buttons (Find, advanced, clear)
(2) retail block (data backed up past in the backend)
--> Customer details...
--> A save button in the footer
(3) advanced search block
--> 4, more search fields of criteria other than the customer name and customer number.So now the problem is when I search advanced search block and come to block in detail and to record the details, advanced search opens upward... tried to save from applications menu also (same effect)
Block, who are at the advanced search window?
And this problem happened only if your advance search sage only, other window not?Check this, if you aren't a database block your block of windows advanced search, you can try to clear the value of the fields before validation;
Why you use two window instead of two canvas? Two canvas is not sufficient for the needs of You ' r?
Hope that something you will get.
-
When button pressed - trigger raised unhandled exception ORA-06502
Hi all
I am currently implementing a hierarchy tree, using these codes on
When button pressed
DECLARE
htree point;
my_sql VARCHAR2 (200): = ' select 1, level, hee_name, null, to_char (hee_no)
of hrm_employee
Connect prior hee_id = hee_dirsup_id
Start with hee_dirsup_id is null
order of brothers and sisters in hee_name';
BEGIN
htree: = FIND_ITEM ("trees.tree10");
Ftree. SET_TREE_PROPERTY (htree, ftree.query_text, my_sql);
Ftree. POPULATE_TREE ("htree");
END;
I can't see my hierarchical tree and I get the above error message.
Is someone can you please help me sort this out? Are there pieces of missing codes resulting from this error.
I'll be very grateful for any help :)
Germany.Hi Germany
trigger an unhandled exception thrown ORA-06502
* Cause: this error occurs when you try to assign a value to a variable, but the value is greater than the variable can handle.
or if you try to assign a nonnumeric value to a numeric variable.--=========================
Action *: pls change the VARCHAR2 my_sql * (200) * to my_sql VARCHAR2 * (2000). *
I can't see my hierarchical tree
Pls take a look here: code sample Andreas Weiden....
I hope this helps...
Kind regards
Amatu Allah.
-
I have a WHEN BUTTON PRESSED trigger with the following;
GO_ITEM('SHIPMENT_LOG. SUPPLIER_ID');
DO_KEY ('LIST_VALUES');
When in NORMAL mode the associated LOV is displayed but when in ENTER QUERY mode, it generates an error tone and does not display the LOV.
What should I do to be able to search using this LOV?Is your button in another area of block and data in a different block? If this is the case, moving the button to the data block will solve the problem.
-
My Mac Pro 2009 gives me only a power button blinks when I try to turn it on.
My Mac Pro 2009 gives me only a power button blinks when I try to turn it on. External drives turns on but not the computer or monitor. I tried holding down the power button to restart but I still get only a power button blinking and no departures. It is running IOS 10.8.5 and I use it mainly for recording and mixing of music. I use Digital Performer and, sometimes, ProTools. Nothing new has been installed recently.
fans on, power button flashing says "not enough RAM that works correctly for starting up".
-
When I try to download the demo of Photoshop versions appears that these messages "download error. Press Retry to try again, or contact customer support. (49)"and I don't know how to fix it. I have Windows 10 (64)
Hi sergiol2102654,
Open creative cloud Application
- Log out of the desktop creative cloud application,
- Restart your computer
- Connect again to creative cloud and try download
Duplicate Threads:-Re: CC message 'Download error'
Useful article:- creative cloud help / troubleshooting install problems with log files. CC
Error download or update Adobe Creative Cloud applications
Let us know if this helps
~ Assani
-
"Download error. Press Retry to try again, or contact customer support. »
When you try to view or update my apps on creative cloud, I get the following error message: "download error. Press Retry to try again, or contact customer support. "Even if I try to download anything through a round route point, I'm inclined to the same error screen. Any ideas?
Please visit https://helpx.adobe.com/creative-cloud/kb/Download-error-apps-tab.html.
I hope this helps.
-
Try to install Photoshop CC but get the following message, download error. Press Retry to try again, or contact customer support. (49)
Hi samir,.
Please see error download or update Adobe Creative Cloud applications
You can also view the nets below where the same issue was addressed:
https://forums.Adobe.com/thread/1489252
Kind regards
Sheena
-
CC App shows error download on the Apps page. Press Retry to try again
10.8.5 Mac.
CC App shows error download on the Apps page. Press Retry to try again
Really frustrating. It worked for 2 days and since then I get this error message. There is no problem of firewall etc.
Hi ParagonLtd,
Please try to manually apply updates: http://prodesigntools.com/adobe-cc-updates-direct-links-mac.html.
Please follow the very important instructions before downloading.
Kind regards
Romit Sinha
-
original title: what happens if I can't start?
How to get back on the desktop? and when I push the Start button, that it doesn't show up?
Try the following solutions:
To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.
If the problem persists, try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.
In Safe Mode, try the following:
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.Also:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
See if Windows starts correctly, when you click on the start menu.
You should also try to check your computer for any malicious code on it.
Credit SpiritX [MVP]
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/<-->-->
http://info.prevx.com/downloadcsi.asp<-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
For Windows 7, these are however the same can be done under Vista and XP even.
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/
======================================
If necessary AFTER THAT you are sure that the machine is clean of any malware.
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html
Maybe you are looking for
-
Problems with CapitalOne360 of spam filtering?
I've been away e-mail CapitalOne360 legitimate and important. Is anyone aware of this problem? My quick reading of the "net has not turned a clear discussion. I have since run tests myself and find that I will not receive CapitalOne360 emails from
-
I am the computer ilitarate, can you tell me how to use a usb flash drive
I REALLY DON'T KNOW MUCH ABOUT COMPUTERS, YOU CAN ME TELL HOW TO USE THE USB FLASH DRIVE? PLEASE,
-
Media Center extender on Vista Business
I would like to see my vista media center content on my desktop (Vista business running). Is there a way to make it act as an Extender? The Media center is on the same network as my desktop computer and the only other extender is my XBOX 360. Thank
-
Reference Dell place 7 does not connect to Verizon iPhone Personal Hotspot
My Dell place 7 recognizes my hotspot, saves the password, the signal strength excellent; by pressing "connect" has no effect. This personal hotspot works fine with my Dell Inspiron laptop, I have exactly the same problem with hotspot personal from m
-
Smartphone blackBerry Storm problems international roaming
Yet another problem Storm for me. I am currently in Hong Kong and the global data feature does not work. When switch mode GSM, he says constantly only SOS calls. I tried to manually choose a network... for example, SmarTone Vodafone but it constantly