No incoming notification mode standby

Similar Questions

• Notifications not working when phone Mode standby

  Hello

  I took delivery of my Z3 Compact last month, and overall it is very good. This is completely standard, out-of-the-box, with no apps that affect the system.

  I found a very annoying problem with the Notifications sound when the phone is in mode 'sleep', IE the screen completely black, either due to the function of time-out or when I press the round power button.

  The problem is that no notification not crossed; If I'm expecting an email from work, I constantly to wake up the phone and as soon as the lock screen appears, then do the notifications.

  How can I get the phone to always send a notification sound, even in mode 'sleep'.

  Thank you

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  It seems that you have activated the STAMINA mode in your phone via the settings > power management > STAMINA mode. You can add apps to stay active in mode if you go to settings > Power management > STAMINA Tap mode > active Apps in mode standby.

• Cannot start my satellite 4060 XCDT mode standby

  I can't start my satellite 4060 XCDT from sleep, from his sleep, I have to reboot for it to restart, sometimes, he'll leave the day before, but mostly he used, I tried updating the BIOS, nothing works!

  Hello
  often there is a problem with installed programs that Don t 'like' Mode standby or Hibernate.

  This could be for example downloadable, firewalls, Systemchecking programs.

  What additional hardware. Do you have the connected equipment that Don t supports sleep mode, such as PCMCIA cards for example?

  Good bye

• L540 missing WiFi/BT after activation of the mode standby

  Hello

  I use L540 running Windows 8.1 64bits. After waking from sleep, my Intel(r) Dual Band Wireless-N 7260 does not work. Operating system detects the NIC, but Device Manager shows the exclamation point. Troubleshooting Auto does not work. There are two ways to fix this problem - stop and restart PC or device uninstallation/installation using Device Manager. All the drivers/firmware is up to date.

  Do you have an idea what to do?

  Hi Aleksandarm,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the Wifi does not work after wake up mode standby on your ThinkPad L540.

  Please check is the (allow the computer to turn off this device to save power) is checked, to proceed to the steps you have to go Device Manager expand network adapter and right click on Intel(r) Dual Band Wireless - N 7260 go to properties, click power management and change the setting.

  Can you please provide us with the Dual Band Wireless-N 7260 (R) driver version.

  Please let us know the results once you have completed the steps above.

  Best regards

  Agnes Kumar

• Switch 10 (64 GB, 1920 x 1200) - BSOD in standby mode (standby)

  Hi people,

  I have a stable problem with my new Acer Switch 10, 64 GB model with screen 1920 x 1200 - if I pass automatically in standby mode (standby mode), I have about 50/50 to find it restarts when I come back to it - at some point during sleep, it falls in a "your computer has encountered a problem and needs to restart. It was 1 day of use - I encountered this already 10 times, that's why I decided to ALWAYS switch off the shelf by judgment. This is not very practical. I checked with BlueScreenView minidump files - error is still the same, catches of attached check screen

  

  

  Should I send it to the service? WIndows is preinstalled, all including the BIOS updates are installed.

  Minidumps can be downloaded here - https://drive.google.com/folderview?id=0B7Gf-eniqaBzdlBwa0pWeDhSNWc&usp=drive_web

  After I've sent my crashdumps bugtracker VirtualBox I pointed a wireless driver for Realtek which seems to cause the problem. Unfortunately the version installed is the last provided acer.com on in support area - v3007.2. I had to look for a newer version of this driver and managed to find an HP website. More details can be found here - https://www.virtualbox.org/ticket/13902

  The new (v.3007.6) driver for Realtek RTL8723BS wireless SDIO card can be downloaded here - http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=ru&lc=ru&dlc=ru&softwareitem=ob-140101-1

  In addition to solving my problem, it also fixes ad one when sometimes wifi connection becomes limited and no network do not appear until the reboot (or sometimes assisted flight mode). I recommend all users to Switch 10 update their drivers. It's a shame that Acer provides no drivers on the official site updated.

  Problem solved.

• mode standby lights up when

  Dell dimension e510 with xp home edition 5 years reference. When you turn power button on it goes into mode standby instead of turning on. it flashes yellow when you press it again once nothing happens, it keeps flashing yellow HELP!

  I understand that when you press the power button, the computer goes into sleep mode. A change of adjustment may be necessary.

  Check the following:

  1. click on start

  2. click on Control Panel

  3. click on Power Options

  4. click on the Advanced tab

  5. click under "when I press the power button on my computer:

  6. click on stop

  7. click on OK

  Shut down the computer normally, and then press the power button. Check the result.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• T500 wakes up automatically mode standby when on feeding

  Just got a new T500 and installed Windows Vista Business x 64 and all updates from Lenovo and MS. everything works fine except one small thing:

  When I put the computer in standby mode och put into hibernation, he stayed there for a few minutes and then he wakes up automatically again. Then back to mode standby/Hibernation again. Then he continues in a loop this way.

  I noticed this happends only on the current.

  Nothing about it in the Windows event log. I've changed almost every setting in the BIOS but without success...

  Any idea?

  Found the answer here:
  http://communities.VMware.com/thread/197962

  It was 'VMWare vCenter Converter standalone 4"that was causing the problem. I uninstalled it and wake up without supervision problem has disappeared.

• Dell inspiron w / xp sp3 stops when the lid closed only in mode standby

  Dell inspiron e1505 on windows xp sp3 will stop when the lid closed mode standby. In "idle mode" it shuts down for a few seconds then screen turns on and I can work as usual.  Why is it turn off in standby mode?  Happens in AC mode and battery.  is it a software problem or a hardware problem.  I see others with the same problem and vista dell.

  http://support.Dell.com/

  Dell support.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Contact Dell

  http://en.community.Dell.com/forums/

  Dell forums

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I have an ACER model AX1430G-UW30P, how to turn off mode standby?

  This computer is asleep after 10 minutes and the scan aborts and long printing print jobs. I would like to deactivate "standby"

  Hi Don Roberts,

  Thank you for visiting Microsoft Community.

  According to the description, the system goes into sleep mode after about 10 minutes and he abandoned jobs scanning and printing for a long time. Now, you want to disable the mode standby on the system.

  Certainly, I understand your concern.

  I would suggest trying the following steps and check if that helps.

  1. Click on the power icon on the tray on the taskbar and then click on "Power Options more." Will launch a new window.
  2. Click on the radio button 'High Performance' under 'Hide supplemental pension plans' and then click on "Change Plan settings". Will launch a new window.
  3. Click "Never" in each of the categories apart from the following drop-down list-"turn off screen" and "Put the computer to sleep."
  4. Click "save changes." "Sleep" mode is disabled.

  For reference:

  Also, I suggest to refer to the following articles given below and check if that helps.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• My question is that I have a HP Slimline it will harm my computer just if I leave it on the mode "standby" 24/7 and

  I have a HP Slimline Pavilion model: s5120f, Prod: NP187AA, Windows Vista. My question is it will harm my office if I leave

  on mode "standby" 24/7 and the monitor configured to sleep approximately: 20 Minutes?

  It will not damage your computer to "sleep" 24/7 and wake up to the need.

• Is it possible for a Cascade application change the Notification Mode to vibrate at normal

  I am interested in creating a timer application that returns my phone in 'Vibrate only' notification 'Normal' after a period of time defined.  I knshow you need to set permissions, but I didn't know anything like that to give permission to do so.  I have a Z10 with 10.2.1 on it.

  Is this possible or not BB 10.2.1 avoid this?   It would be nice to be able to do.

  A snippet of code showing how to set up permissions for this would be useful.

  You can change the Notification Mode since 10.2, here's what you need to do.

  Add this line to the bottom of the file bar - descriptor.xml, under the tab "source":

  access_notify_settings_control
  

  Add this line to your .pro file:

  LIBS += -lbbplatform
  

  Add this to your file:

  #include 
  
  public: Q_INVOKABLE void switchMode();private:
      bb::platform::NotificationGlobalSettings* notificationGlobalSettings;
  

  Add this to your .cpp file:

  void YourClass::switchMode()
  {
      if (notificationGlobalSettings->mode() == bb::platform::NotificationMode::Normal) {
          notificationGlobalSettings->setMode(bb::platform::NotificationMode::Vibrate);
          break;
      } else if (notificationGlobalSettings->mode() == bb::platform::NotificationMode::Vibrate) {
          notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
          break;
      }
  }
  

  Simply call switchMode() function in c ++ or QML to switch between the Normal and the vibrator. Note that this code will do nothing if the mode is set to anything else than Normal or vibrate. If you prefer to scroll through all the available Notification mode, use this function:

  void YourClass::switchMode()
  {
      switch (notificationGlobalSettings->mode()) {
          case bb::platform::NotificationMode::Normal : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::PhoneOnly);
              break;
          }
          case bb::platform::NotificationMode::PhoneOnly : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Vibrate);
              break;
          }
          case bb::platform::NotificationMode::Vibrate : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Silent);
              break;
          }
          case bb::platform::NotificationMode::Silent : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::AlertsOff);
              break;
          }
          case bb::platform::NotificationMode::AlertsOff : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
              break;
          }
          default : {
              notificationGlobalSettings->setMode(bb::platform::NotificationMode::Normal);
              break;
          }
      }
  }
  

• Recover mode standby by pressing the space bar

  When I first set up Windows 7, I could recover mode standby by pressing the space bar. Now, I have to press the power button on the computer itself. How to get back to wake the computer by pressing right on the space bar?

  When I first set up Windows 7, I could recover mode standby by pressing the space bar. Now, I have to press the power button on the computer itself. How to get back to wake the computer by pressing right on the space bar?

  Hello

  Open Control Panel , and select keyboard.

  Select the Hardware tab.

  Click the Properties button.

  Click the change settings button.

  Select the Power Management tab.

  Select the allow this device to wake the computer .

  Click OK/apply/OK.

  Test and let us know the result.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• Errors in the log of alerts in mode standby

  Dear all,
  
  We have 10 gr 2 CARS with physical environment Data Guard using ASM, and both have the same disk group names. Let's say the first name of the database is prim and stand by a database name is stdby. We receive the following errors in the standby alert log file:

  Clearing online redo logfile 9 +DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo
  Clearing online log 9 of thread 2 sequence number 0
  
  Errors in file c:\oracle\product\10.2.0\admin\stdby\bdump\stdby1_mrp0_4288.trc:
  ORA-00313: Message 313 not found; No message file for product=RDBMS, facility=ORA; arguments: [9] [2]
  ORA-00312: Message 312 not found; No message file for product=RDBMS, facility=ORA; arguments: [9] [2] [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-17503: Message 17503 not found; No message file for product=RDBMS, facility=ORA; arguments: [2] [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-15173: entry 'prim does not exist in directory '/'
  
  
  Errors in file c:\oracle\product\10.2.0\admin\stdby\bdump\stdby1_mrp0_4288.trc:
  ORA-00344: Message 344 not found; No message file for product=RDBMS, facility=ORA; arguments: [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-17502: Message 17502 not found; No message file for product=RDBMS, facility=ORA; arguments: [4] [+DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo]
  ORA-15173: entry 'prim' does not exist in directory '/'

  The errors indicate that the day before trying to find files in the directory + DG_DATAFILES_AND_FB/prim/onlinelog that apparently does not exist in the mode standby. This is the result of the query to redo connects in standby mode:
  

  SQL> SELECT group#, status, member FROM v$logfile where member like '%prim/%'
  /
  
      GROUP#   STATUS         MEMEBER
      ----------     -------            ---------------------------------------------------------------------------------
           9                            +DG_DATAFILES_AND_FB/prim/onlinelog/group9_2a.rdo
           1                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo1.rdo
          10                           +DG_DATAFILES_AND_FB/prim/onlinelog/group10_1a.rdo
           2                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo2.rdo
           3                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo3.rdo
           4                            +DG_DATAFILES_AND_FB/prim/standbylogs/sredo4.rdo
          11                           +DG_DATAFILES_AND_FB/prim/onlinelog/group11_1a.rdo
          12                           +DG_DATAFILES_AND_FB/prim/onlinelog/group12_2a.rdo
  
  8 rows selected.  

  How can we get rid of this error?
  
  Best regards

  After this change (re - create log files), it seems that the archive logs are not applied to sleep automatically. However, if I manually apply, it's OK. What could go wrong?

  If you able to receive the archive/redo logs and the recovery does not occur every time that you start MRP? (or) archives even transfer not in the database pending?
  What is the status of destination of v$ archive_Dest?

  I suggest you according to the output by using the below scripts from primary and standby in coded format.
  http://www.Oracle-CKPT.com/dataguard_troubleshoot_snapper/

• A virtual machine enters mode standby for unknown reason?

  We run vCenter Server 4.1.

  We find that we are not able to ping to a virtual machine (Windows 2003 Standard Edition) this morning.

  When check us in the console Client vCenter, we look at it says "happens in sleep mode.  When we try to open a session (I guess that bring us mode Standby - is correct?), we get a message "a ticket type mks has acquired" in the event of vCenter Server log.  We would like to know what this message means.

  Also, we check the possibility to and it is 'Always On', but hibernation is enabled.  However, it should still not go in standby mode.

  Your opinion is requested.

  Thank you

  Post edited by: TonyJK

  Someone must have connected, and Eve instead of disconnected.

  Or is your screen saver to sleep after some time... It should be OS leads, because VM ware does nothing to the active state of the operating system.