T500 wakes up automatically mode standby when on feeding

Similar Questions

• Prevent the PlayBook goes into mode standby when the application is open

  What is the code needed to prevent the PlayBook mode 'sleep' when the application is active?

  Maybe this can help: https://github.com/blackberry/WebWorks-Community-APIs/tree/master/Tablet/sleep

• Computer automatically "wake up" and unable to wake up mode standby when left idle

  original title: screen saver does not work, the computer automatically "wake up". Computer regularly become inactive and cannot be stopped! Forced to pull the plug.

  We have a Vostro 200 with windows vista. The computer still works very well except for two major problems. The first: the screen saver does not work. The screen goes black minute before the screen saver, but when it needs to switch to screen saver mode, the fan in the computer is a thud and the screen turns back on. The second: If the computer is not alone for extended periods of time (hours to end upward in a weird semi-off state). The monitor becomes completely black (the power light goes from green to orange) and the power of the Tower light flashes continuously. If we move the mouse or the keyboard, nothing happens. We are not able to easily to "wake up" the computer. If we hold the power button down for 10 seconds, the round ends. If restart us the breath fan aggressively, but the screen will not display anything. The only way to get the computer working again is to turn off the switch that powers the computer for ~ 1 min and then put it back in again once. After a time abnormally long start-up, the computer goes to the exact same State it was when he went to the black start (the documents are always opened ect.). Does anyone have a similar experience? I am baffled and could use some help. Thank you!

  Hello

  I would guess that you have a hardware driver that is not fully compatible with the sleep mode function. I would check with the manufacturer and system of the various devices for driver updates (do not use Windows Update to do this). If this fails to solve the problem, you can turn off "sleep" (Control Panel/Power Options, check the settings of the engine at idle) or reduce the State of "s" that the system tries to get into the BIOS system (if available).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows switches mode standby when you connect

  Old desktop computer goes into sleep mode when someone is trying to connect.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  I also suggest you to optimize Windows XP for better performance and check if that helps:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• x 230-do is not recovery mode standby when the lid remains open.

  If I close the lid it falls asleep, and when I opened the lid it is repeated.

  If I do not close the lid and it goes to sleep I can't wake up, tried to push the power button / stop flashing keys, trackpad, which does not.

  Any ideas anyone?

  Welcome to the community.

  have you tried pressing the Fn key?

  Kind regards.

• Laptop won't mode standby when open Web pages

  My laptop (Dell latitude E6510) is not want of sleep / hibernate when I open webpages (Chrome). OS = XP.  If I click on standby, it just hangs. As soon as I close the Web pages, it is, even if I have other things open. He has only started this about 3 weeks ago.  Anything else causes, only open Web pages.

  Obvious questions (for me) are:

  You are on the latest version of Chrome?
  You have this problem with Internet Explorer?
  You have this problem with Firefox (if you have installed FF)?

  When you look out in the forums of Google Chrome, have you come across topics like this:

  http://productforums.Google.com/Forum/#! Searchin'/chrome/Eve/chrome/8BbDNAkF_qk/olwEA4Yg830J

  There are some ideas here, but this topic is about a month old.

  I have not seen this problem with the version of Chrome 24.0.1312.57m (which is what I was running earlier today), then I upgraded to version 26.0.1410.43m

  Unfortunately, I got things running for awhile which I cannot test Stand By and Hibernate with this new version of Chrome, until they end :-((hours) and I'm too lazy to go to another system since I can't reproduce the problem.

  I would say it looks like a Chrome issue because there are a lot of Internet chatter on this subject, if you search on Google and other beings human he reported in the forums of Chrome recently, so I would check out there and if you find the solution, I hope that you will do what it is!

• My computer out of the mode standby when I unplug a usb device.

  When my computer is in sleep mode and I have to disable my printer or disconnect a usb device, it turns on. Is there a way I can prevent this?

  Hello

  The system responds to those, as if you had moved the mouse. I know no way to change those.
  Rob - bicycle - Mark Twain said it is good.

• How can I make sure that my models not resident on a host which can enter mode standby when the DPM is activated?

  I have a host in my cluster I have designated as the place where I would like my vCenter server to reside.  I created a rule of affinity for that to happen.  I would like to have my models are on the same host. However, I don't see a way to do this with affinity rules as templates are not displayed in the list of virtual machines that can be chosen to create a group.  I guess that ther eis a way to do it.

  To ensure that guests with templates is not extinguished by DPM, you must override the DPM settings for this host setting DPM to disabled.

  André

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Notifications not working when phone Mode standby

  Hello

  I took delivery of my Z3 Compact last month, and overall it is very good. This is completely standard, out-of-the-box, with no apps that affect the system.

  I found a very annoying problem with the Notifications sound when the phone is in mode 'sleep', IE the screen completely black, either due to the function of time-out or when I press the round power button.

  The problem is that no notification not crossed; If I'm expecting an email from work, I constantly to wake up the phone and as soon as the lock screen appears, then do the notifications.

  How can I get the phone to always send a notification sound, even in mode 'sleep'.

  Thank you

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  It seems that you have activated the STAMINA mode in your phone via the settings > power management > STAMINA mode. You can add apps to stay active in mode if you go to settings > Power management > STAMINA Tap mode > active Apps in mode standby.

• Don't wake mode standby via the mouse or keyboard

  Win 7.

  My computer is used to wake up the fashion 'sleep' by moving the mouse or touching the space bar on the keyboard.  He is not doing that.  I have to manually push the power button on my laptop.  In the control panel section of properties of the mouse & keyboard 'allow this device to wake computer' is checked.  I have changed something in error?

  Thanks in advance... Bob

  Hi Bob,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to wake the computer from standby by using the keyboard or the mouse.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  You did changes to the computer before this problem?

  This problem may occur if the BIOS that is installed on the computer reduced the power of the port to which the input device, is connected if the element of keyboard in Control Panel is not configured to wake the computer when you press a key on the keyboard, if the computer has encountered a problem of system or the sleep button on the keyboard is configured incorrectly.

  I suggest to go through the steps from the link provided and check if it helps.

  The problems of wake the computer from sleep mode
  http://support.Microsoft.com/kb/266283/en-us

  Check out the link for more information:

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the awakening of the computer, I'll be happy to help you. We, at tender Microsoft to excellence.

• X 360 m6-ar004dx ENVY: ENVY x 360 past mode standby mode when it is turned 90 degrees

  Hello!  I bought a x 360 want m6-ar004dx recently and so far it has been a decent laptop.  One thing that has been a nuisance, it is that when I put my laptop on the side (rotated 90 °, open lid and not in tablet mode), the laptop into sleep mode after X number of minutes.  Sometimes, the laptop is do not go to standby mode when he's on his side, however, between "standby mode" when I recover my laptop from the above heading.  It seems that the accelerometer is triggering mode 'sleep' when he turned in both directions.  I checked all my Power Options and ensured that the computer will not mode enter "standby" when it is plugged.  Are there settings I can change to fix this?

  Thanks in advance!

  @aviation76

  I looked around and after a long search, I found that this could be a simple and, possibly, a funny solution (you'll know what I mean once you're done, read this).
  
  Obviously, your model is based on the power button on the left side and when you flip 90 degrees and lay your computer on this subject is on the left, the power button is pressed and which puts your computer to sleep according to Settings - ' choose what buttons power "
  
  Please check the settings above on power options and change to - 'NOTHING to DO' for this problem.
  
  Keep me posted, though!
  
  Kind regards

• PowerShot A630. In automatic mode when 'pull you' touches half green box does not appear

  PowerShot A630 in AUTOMATIC mode when the 'shoot' button is pressed to halfway the green box does not appear. The indicator flash shows and the photo will be shot. Everything works normally, the photo looks OK.

  Your property clean, Ok if the camera is still under warranty, I suggest you start a repair request with Canon and give them a call. They might even know some obscure affecting somewhere... Oh have you tried to do a "reset all" to 'reset to defaults', according to it is called through your settings menu?

  Despite this, it would be a good idea to get this folder with Canon problem

• mode standby lights up when

  Dell dimension e510 with xp home edition 5 years reference. When you turn power button on it goes into mode standby instead of turning on. it flashes yellow when you press it again once nothing happens, it keeps flashing yellow HELP!

  I understand that when you press the power button, the computer goes into sleep mode. A change of adjustment may be necessary.

  Check the following:

  1. click on start

  2. click on Control Panel

  3. click on Power Options

  4. click on the Advanced tab

  5. click under "when I press the power button on my computer:

  6. click on stop

  7. click on OK

  Shut down the computer normally, and then press the power button. Check the result.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.