No joy with SL6S9 to the Pavilion 505n

Similar Questions

• How the Pavilion HPE-150 t has 6 GB of RAM with 3 DIMM slots

  Check the specifications for the Pavilion HPE-150 t, I see that HP currently offers a free upgrade to 6 GB of RAM (from 4 GB.) What I don't understand is that these 6 GB of RAM are provided in 3 DIMMs.

  The only setting I can think of that allows two-channel with 3 DIMMs mode in this situation is to have a pair of 1.5 GB DIMMS in channel A and a single 3 GB DIMM in channel B.

  However, AFAIK, DIMM is not sold in one of these densities (1.5 GB and 3 GB.)

  Can someone explain this for me, please?

  As far as I know, HP is not the "Dual-channel" advertising - they simply offer amount:

  http://www.shopping.HP.com/series/category/desktops/HPE150t_series/3/computer_store?JumpID=reg_R1002_USEN

  FREE UPDATE! 6 GB DDR3 1333 MHz SDRAM [3 DIMMS] from 4 GB

  http://support.HP.com/us-en/document/c01976259

  It is highly unlikely HP POP just in an extra 2 GB DIMMS.

  The only way you can get dual channel of this mobo is to fill the memory DDR3 DIMM 2 and 4 or all 4 DIMM with the same type and density.

• Locking of the Pavilion 7955

  I have a HP Pavilion 7955 about 5-6 years with XP, CIP 6 I think. The original memory has been increased, but that's all that has been done for her. I have McAfee (updated constantly).

  My problem is this: sometimes when I'm online and work the thing just freezes and won't do anything. I have to turn it off and restart. Sometimes, it will close and restart automatically. Sometimes when I leave the computer for a minute or two and the screen saver (family photos) are running it will stop just with part of the image.

  McAfee rises and says that my computer is "inadequately protected". If I try to run the "fix" just, it goes for a few seconds and turns off the remedial program without solving the problem.

  I got to say the following. "was caused by the storage driver Intel (IdeChnDr.sys), which was created by INtel Corporation. This product is no longer supported by the manufacturer. »

  He recommended that contact Intel. I tried (on their website) and they recommended that the manufacturer of the computer for hotfixes or updates. So here I am.

  One thing McAfee said was that if I was unable to fix the problem and continue to have errors, I can uninstall the storage driver Intel (IdeChnDr.sys). What would that do?

  I have tryied just go to McAfee Security Center to check the current status and it won't even happen when I click the icon.

  Looks like you have a bad sectors on your hard drive. You can either isolate the defective sector to tell the drive to 'jump' at the wrong place, or you can back up all your data and install a new hard drive (make sure that you have recovery discs).

  Here's an article on Scandisk - you can use it to isolate areas... may take a few hours.

  http://support.HP.com/us-en/document/bph06946

  Message edited by RasterBlaster on 29/04/2009 12:43

• Hard drive WD3200BEKT is replaceable with newer model, the WD5000BPKX?

  MINE IS HP PAVILION DM4 1009-UT.

  Hard drive WD3200BEKT is replaceable with newer model, the WD5000BPKX?

  Thank you

  Hello

  Yes, the newer model drive you mention will end.

  If necessary, the procedure to replace the HARD drive is detailed from Page 61 of your & Maintenance Guide.

  Kind regards

  DP - K

• The Pavilion g6-2123us left hinge pulling the bezel!

  Hello. My daughter about 2-3 years-old HP Pavilion g6-2123us has a problem with the left hinge. The support is pulling loose from the lower left corner of the lcd screen and the cracking of the collar. Did some research, it seems similar to problems left hinge that has occurred with the HP DV 9000 and the Pavilion dv7-4070us series.

  While the unit was under warranty, we sent it in for repair of hinge, which was covered - so this is the second time in the life of the laptop a two-or-three-year-old who broke the hinges. Needless to say, I'm not impressed by the quality of this laptop case/hinges. (It works well otherwise!). Although the warranty has expired, I hope that customer service can make something low-cost or free given that this seems to be a serious design flaw. (I have some experience with electronic repair and I saw coins on ebay, etc., but I really hope HP can intervene at the plate!)

  Thank you! Anyone has the info / similar problems with this model?

  Hello kgallagher

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• Pavilion 10-n102ne: difference between the Pavilion 10-n102ne and 10-n102na

  I want to order a cover for my device (Pavilion 10-n102ne), but did not, on the contrary, I think I found a similar device (10-n102na), so I was wondering what is the difference between these 2 models, not vs na, what it means. The recovery kit works on my device.

  What is the differnce between Recovery Kit or by creating a windows recovery disk, and which should I choose if I want to completely format the system and install another OS?

  Another question is that how do I backup my Windows 10 activation, or is it when I install freshly a Windows 10 the appliance will automatically activate windows? is the serial imprented into bios?

  Awaiting your response

  @ChristopherED
  Welcome to the Forums of HP,
  I hope you're well

  If I understand correctly you want to know about the difference between the Pavilion 10-n102ne and 10-n102na.

  Here is the link with the characteristics of the two products (spot the difference):

  HP Pavilion x 2-10-n102na
  HP Pavilion x 2-10-n102ne

  It is not very different between the recovery kit or one created by your computer apart from the type of creation, if the media created on your computer do not work you can always get one from HP, but you cannot create a new computer because it allows only a creation of media recovery on your computer.

  And the answer to your question about activation, you are right, that the activation code is printed/saved to BIOS if you do not have an option to save as.

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.
  Thanks for posting in the Forum from HP Support.  Have a great day!
  Kind regards

• How to replace the motherboard on the Pavilion p6550z

  How to replace the motherboard on the Pavilion p6550z

  Depending on where you have acquired your replacement Board Aloe, it may be 'tattooed' with the name of the model, product number and the serial number of your computer.

  Use these HP guides as needed.

  (1) unplug the computer and hold power in 5 to 10 seconds.

  (2) on the side of the cover (see guides above)

  (3) place the case on the closed side with the open side facing upwards

  (4) take a photograph detailed inside your computer... take more if necessary

  (5) unscrew the restraint of external expansion card (see guides above)

  (6) disconnect the power supply connections to the motherboard and all devices... tag and/or take more pictures

  (7) remove the... rock expansion cards cards gently just pulling up

  (8) unplug data cables from the motherboard and readers... tag and/or take more pictures

  (9) disconnect remaining USB switch, connections etc... once again, the label or take more pictures

  (10) remove all motherboard screws on the case and remove the motherboard

  (11) reverse the steps, starting with #10 and working #1

  Good luck

• Here are two correct graphics for the Pavilion dv7-4270us cards:

  Here are two correct graphics for the Pavilion dv7-4270us cards: ATI Mobility Radeon 6370 AND AMD880G with ATI Mobility Radeon HD 4250?

  An overview chart problems and need to ensure.

  Well, after all the day I found my answer in a review of this laptop on amazon.  That is this HP forum.  I never get help here.

• Screen goes black in the office in the pavilion g6

  Hello

  I have a hp laptop pavilion g6 with two cards, the AMD M880G with ATI mobility Radeon HD 4250 and AMD Radeon HD 6470 M. The screen goes black when you enter the desktop screen (only visible pointer) after you have reinstalled windows 7 64-bit with HP recovery, checks resetting factory and the reduced image.

  I do not see the Task Manager either because it does not appear on the screen when I press ctrl-alt-delete. When I try to update the driver in safe mode, downloaded from HP site, windows tells me that the installed controller is already updated and when running the catalist also downloaded HP gives me an error "Error loading controller detection." Any help?

  Thank you

  No problem. If you could mark it as an "accepted solution" so others can find the answer, that would be greatly appreciated. Have a great day!

  Mario

• work on FB4.5 and Flash5.5 simultanoiusly - lack of indicators of code with classes in the default package.

  Hello!

  I have installed Flash Professional CS5.5 and FB4.5 to work together. I just follow this tutorial: http://www.adobe.com/content/dotcom/en/devnet/flash-builder/articles/sharing-projects-flas hbuilder - flash.html and almost everything looks good, but unfortunately works in Flash Builder, adding new Classes, I don't have a default package accessible Classes. In this way I can't yet declare Sprite, the Array class and so on. In the code hints I will receive my current package classes only.

  I put the project FLA in Flash CS5.5 with cases like the package for my classes. It's for examle:

  com.myDomain.testProject where DocClass exists. By adding this path as the document to FlashCS5.5 everything works fine, I can easily run, debug movie in the Flash environment.

  Definition of this project by "Import"->"FlashBuilder-FlashBuilderProject"->"dossierprojet" pointing to the .fla file, it seems that the thing is going well. The project is defined, and even I had some problems with the name of the Document class (it seems that Flash Builder must have the Document class with the same name as the flie .fla) and renaming I can run or debug him and it works.

  But if I try to add the new class in the directory I find myself with no indication of code, and in fact no default package classes are supported. This means that I get errors when trying to create the instance of any common class etc. In the code hints, I get only my advice of package (see photo)

  

  Maybe I misunderstand some basics of package and has done something wrong, but in general I don't want to put all my classes to the location of .fla but sort them upward in specific folders because I assume that the project is important enough.

  If you can help me, thanks in advance. Been to mess with the code is a part of the nature of the programmer, and when we find the answer that it feels like a King. When to address environments like that, there never is joy and happiness, but in most occasions couple uncensural of words at the end and an overview on the watch - agrrrhh I lost so much time :/

  see you soon

  inverters, it seems that the Flex sdk is not added automatically I did not notice. Looked to find errors in other regions (as always)

  Thanks anyway :)

• When I sync my ipod touch with itunes only the first song is downloaded and then he sits for hours

  When I try to sync my ipod touch with iTunes, only the first song seems to be downloaded, then he just "hangs" for hours

  What happens if you try to synchronize not this first song and next song?

  What is listed n the block status of iTunes when it freezes?

• A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  Yes.

  http://www.Apple.com/Mac-mini/specs/

  the voltage may vary from 100-240 V AC.

• I have a HUD following my cursor with info on the image. How can I get rid of him?

  One of my Mac Pro, there's a HUD display with information about the image. It sticks to my cursor, and making it difficult to work. I'm sure there must be a command to stop this, but I'm not. I have another Mac Pro at work, and he does not. Any help would be appreciated.

  It's probably the Tooltip Metadata.

  You switch on and off with the key combination command-T or the browser and menu overlay metadata visualization:

  

• I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  You can't keep slideshows as captioned photos.  Slide shows get migrated in the form of albums for the Group of photos is maintained.  But Photos don't have the ability to add descriptions to the slide show so that they would have to be manually added to each slide automatically.

  However, a possible solution would be to export every slide show in iPhoto as a Quicktime movie file. Which will keep the titles and descriptions on each slide.  The resulting QT files can be imported into the iPhoto library before migration or photo library after.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari