No material listed in Labview 2010 Linux DAQ

Similar Questions

• Running the latest Labview 2010 on new computers (Windows 7) but who have the older/more older material NI ELVIS

  We are running the latest Labview 2010 on new computers (Windows 7) but have more older/more old material NI ELVIS (NI ELVIS I?).

  LabVIEW works very well and the device drivers are installed.

  What NI ELVIS software move us?

  The latest version indicates that it is for ELVIS II and III hardware.

  Thank you

  Hi Tom,

  I'm sorry, I read your first post completely backward.  It's the pilot , you should try.  Sorry for the confusion!

  Kind regards

• LabVIEW 2010 help control Source code...

  I'm trying to set up Tortoise SVN to work with LabVIEW 2010.  I was able to get lvmerge and lvcompare to work by adding them to the list of programs within the turtle, but leave in LabVIEW there is a section to configure the source control I have a problem with.  Under "Configure Source code control" there is a drop down to the name of the Source control provider.  There is only one option: < none=""> .  I looked into it a bit online and found that LabVIEW running in Windows searches the registry database for a list of the sources of control.  I don't know exactly what he's looking for in the registry, but maybe I could make an entry in the registry to get LabVIEW see Tortoise SVN.  Anyone had this problem or any experience with this?

  To use the NCC options provided by LabVIEW you will need from a provider. For subversion, it is possible with the PushOK SVN SCC plugin.

  If you install you can checkin/checkout directly from the LabVIEW project environment.

  If you really like TortoiseSVN discover the Tortoise SVN integration made by JKI-software.

  Tone

  PS there is nothing special about 2010 in the integration of the CSC.

• LabVIEW for linux (Ubuntu 64-bit)

  University of Helsinki uses a centralized managed linux installation on all linux workstations.  The distribution is based on Ubuntu 9.10, and it is considering moving to 10.04 LTS.  Almost all of the facilities are 64-bit, only a few old machines (> 5 years of age) are still using 32-bit installation.

  In the Physics Department, there are about 500 machines and about 30% of those who are linux workstations.  We strive to get LabVIEW for Linux installed on our desktop, then run under Ubuntu 64-bit.

  1 problem (not a problem): For some strange reason, the installation media does not CD/DVD use normal files (iso9660) system, but the media is formatted with the file system "Mac OS X HDF +".  It works under linux, of course, but has been a source of mild confusion.  It would be wise to change the normal file system to the next version.

  2nd problem: The installation under Ubuntu does not work.  Namely:

  First I mount the media with the "mount-t hfsplus/dev/sr0/media/cdrom0" and try running the installation script
  CD/media/cdrom0/Linux/labview-2009
  sudo knew
  . / INSTALL

  Installation is not going smoothly.  According to the error message, the script is not found the library libbz2:

  / Media/cdrom0/Linux/LabVIEW-2009/bin/rpmq: error while loading shared libraries: libbz2.so.1: cannot open shared object file: no such file or directory

  However, the library is in standard place:
  $ ls/lib/libbz2 *.
  /lib/libbz2.so.1 /lib/libbz2.so.1.0 /lib/libbz2.so.1.0.4

  I know, "support of the distribution" list only include Mandriva, RedHat, and SUSE.  The version of LabVIEW is the latest version of the fall of 2009.  Does anyone have any ideas what to try next?

  see you soon,
  Pekko

  
  

• Is the combo box drop-down "Targets" in LabVIEW 2010?

  Guy of OR,.

  In LabVIEW 2010, I installed the touch screen module but 'Touch Panel corresponding project' does not appear in the list of "Targets" of the "Getting Started" initial LV window. The Add/Remove dialog box confirms that the module is installed... Is - can be changed?

  Thanks in advance

  I think that the Touch Panel project should be added to the drop target when you install the Touch Panel Module.  As this isn't the case, I think it's a bug.  Thanks for pointing out that, and I will file a request for corrective measures to get changed for the next editions of LabVIEW.

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• The PSC-2000 is programmable with LabVIEW 2010 SP1 / Real Time 10.0.1?

  I have a PSC-2000 camera I want to use for a small project.  I see on the site OR that it is said»

• "Support for LabVIEW Real-time 8.5.1 and earlier" and "Support for Windows Vista and earlier versions.  It means that I can not use the latest version of LabVIEW (2010 SP1) with time real (version 10.0.1) running on a Windows 7 computer?  If not, what version of LabVIEW, real-time and operating system do I need?

When I tried to add a new target under LabVIEW 2010 SP1, the PSC-2000 was not among the choices.

As the support NOR documents indicate, you need LV version 8.5.1 or earlier to program the cFP-20xx devices family.  Version 8.5.1 of LabVIEW does not work under Win7.  You will need Windows Vista or something earlier like XP.

• Is there a Module NXT for LabVIEW 2010

  Is there a Module NXT for LabVIEW 2010?  If not, are there plans to bring a available and if so, when?

  Hello

  I found a link to a download for the module 2010 here.

  I hope this helps.

• I get the error indicating the niajel.dll missing for HSDIO in labVIEW 2010, can someone help how to solve this problem.

  I'm using LabVIEW 2010 and installed the drivers from device LV2010 and try to use the HSDIO functions, while setting the HSDIO function on the block diagram showing niajel.dll is missing, can someone help me fix this bug.

  I tried to uninstall and install not able to set several times.

  Hello. niajel.dll corresponds to the NOR-TClk, although NEITHER-HSDIO does not specifically use it. You use certain functions TClk?

  Also, what other PXI device driver are installed on the system? Could you give a report on the MAX system?

• programming LabVIEW 2010 how to scxi 1102 and 1503 cascade in scxi 1101 case

  How to scxi 1102 and 1503 cascading if 1101 scxi for labview 2010 programming

  

  just test ok
  
  LabVIEW 2010 latest

• How to sit interface with matlab 2010A and labview 2010

  I use tools of simulation interface 5.0 with matlab 2010A and labview 2010, I want to take my cue from matlab, labview but signal transfer, I am facing a problem. I want to know is there any compatibility issue in sit 5.0 or I do something wrong?
  photos of errors are attached.

  natasftw wrote:

  http://digital.NI.com/public.nsf/allkb/02F5FA55FC28BDE1862578A30071F975
  While it is for 2011, I doubt that they decided to remove 64-bit compatibility as they went forward as 64-bit has become more rather than less demand.  In this document,notes LabVIEW Simulation Interface Toolkit does not support 64 bit versions of MATLAB application software."

  The extent of the compatiblitly for 32 - bit, I'd take a peek at: http://digital.ni.com/public.nsf/allkb/D174674A91E5536286257428005C2426

  The OP's question was SIT support 64 - bit version of LabVIEW and 64-bit version of the MATLAB/Simulink itself, not the operating system software.

  Document in your second link is on a completely different topic to have API for LabVIEW and MATLAB/Simulink/RTW (well, mostly Simulink & RTW). Here is the relevant link for the 32-bit compatibility: http://digital.ni.com/public.nsf/allkb/049295038FF0EE2A86257A06006B2DAD is no SIT 64-bit.

  Other underlying issues is that Pharlap does not have a 64-bit version. Finally, simulations are better performed on some RTOS (embedded PXI) for a deterministic execution rather than PC operating systems.

  -BTC

• Where the range of network flow in LabVIEW 2010?

  I know that this palette "exists" (since I can with the right button on a thread of endpoint and network flow Palette appear in the menu), but (so far), I have not found on the pallets of LabVIEW 2010 function.  Where is it hidden?

  BS

  Under the "Data Communication" on my machine.

• 9.30 NIDAQ drivers not install LabVIEW 2011 - example. Microsoft .com's in LabVIEW 2010 under vi.llb

  I just upgraded to LabVIEW 2011 without uninstalling LabVIEW 2010.  I downloaded the last set of drivers DAQmx 9.30.  I find that these drivers are installed in a DAQmx folder under the vi.llb of theLabVIEW 2010 and NOT in the vi.llb of LabVIEW 2011.  The DAQmx features do not appear on the menus and the existing instances are reported as 'cannot be compiled. How can I get the DAQmx functions to properly install LabVIEW 2011?

  You must DAQmx 9.4.

  9.4 DAQmx

• Thread mode in LabVIEW 2010 bug?

  I had an application written in LabVIEW 2009 for a PSC-2220 who stopped working when it was converted in LabVIEW 2010, and I tracked down the problem to one thing: the software sets the mode of the Serial wire. Call this method simply disables all of the program. It works when you run from LabVIEW... but if you build an application to start it will not start. Remove the call to thread mode - and voila, the application runs as it should.

  -I can solve the problem easily by calling does not fashion wire method, but this isn't a solution due to the fact that I need to use the RS-422/485 port RS485 2-wire mode.

  I found a solution that I can live with... it does not explain what is wrong, but here's what I had to do to be able to run the init.vi serial port from outside vi.lib\Instr\ - which in turn allowed me to add the changes I need (set the thread mode) without having to edit a library function :

  I had to flatten, i.e.replace all of its report with their content... I could have tried the inline function, but did manually to be sure.

  This may indicate that something is wrong with the binding when the program is compiled with RT... but it happens without producing errors of conflict or anything either. A startup.exe is produced - but is not able to run.

• LabVIEW for Linux

  Hello

  Where can I download LabVIEW for Linux? I'm not able to find the installation for 2015 files, but only the Windows and OSX version.

  Thank you!

  It can not.  You will have to reach out to your representative local of NOR to ask them a copy of the media.

• Error 7 when opening the file auto-LabVIEW 2010

  I use Open/create/replace file in LabVIEW 2010 to open a text file.  It works fine until I have compile the code.  Then, I get error 7. I tried the paths that are similar to the following, but no doesn't work.

  c:\\file.txt

  c:\\file.txt

  c:\------\file.txt

  Thank you

  You must get the path to the .exe file.  Then remove the name of .vi and the .exe.  Then build the path from there to get your .txt file.  The way you have it, you treat the .exe to a folder rather than a file.  The text is no file not part of the .exe, you cannot create a path that includes the name of the .exe.

  Why my executable does not work when you use the constant path of the current VI?