No matter WHICH instance of R12 NOTES for UPGRADE to R12.2

Similar Questions

• No matter which usb port I use for a usb hub

  I have a compac presario CQ60-215DX notebook and I want to install a usb hub. No matter which usb port I use? would also like to know if it is necessary to remove it to restart my computer"

  Thanks for any help.

  Karen

  The only time you usually get trouble with USB ports is when you mix both USB 3.0 and USB 2.0 devices.

  • For all USB 3.0 is backward compatible, it is simply not the case that all the older devices are USB 3.0 compatible.  If you have a problem with an older device, consider that it may be because it is plugged into a USB 3.0 hub / port.
  • Not all hubs are created equal.  If you try to run some devices high speed (things you plug a hub) on a lower speed (2.0) turntable, they may lose the integrity of the data (Act funny) or refuse to perform certain tasks (depending on the device).  These devices may work best when it is plugged directly into the computer no matter that they are running as the USB 3.0 or USB 2.0.  It is not, therefore, necessarily what port the hub is connected - rather, it could be the hub itself (if you have problems).

  Peripheral USB could better with a reboot - some may not reset at all without rebooting.  A USB hub, one of the simplest types - these are usually plug-and-play.  That's all that is connected to the hub, which could be the determining factor for the restart.  It's Windows - it is always better to restart when things change.

• Updated the BIOS "not for upgrades"

  Hello

  I have an Aspire V3 - 571 G Notebook with ArchLinux dual-boot Win8.1. When I start Arch I get this (Ivybridge-/ Sandybridge-related) error:

  "[drm:cpt_serr_int_handler] * ERROR * PCH transcoder FIFO A against the recess.

  After Research , I think a BIOS update should solve the problem. But in the BIOS section there is a confusing line:

  "BIOS - UEFI to Windows 8 (not for updates)"

  So, does that mean that:

  (a) not for those who had Win8/8.1 pre-installed (like me) or

  (b) not for those who performed an upgrade inplace of Win7 for Win8/8.1 instead of a clean install?

  Does anyone know what is this note?

  Thanks for all the answers,

  Leonard

  Unfortunately, there is not a way to update a UEFI BIOS system.

• MetaLink notes for improving 11.0.3 to 11.5.10.2

  Hi all
  
  Is there a Metalink Notes for upgrade/migration Oracle Applications 11.0.3 on NT to 11.5.10.2 unix?
  
  Or is it possible to do it anyway? Or is it just a theory.
  
  
  Thank you very much

  It is not theoretical; many projects of 11.0.x to 11i upgrade was carried out successfully. The steps in the upgrade manual are easy to follow, and it's convenient.

  Google search for [level 11.0.3 to 11i | http://www.google.com/search?sourceid=navclient&ie=UTF-8&rlz=1T4GGLJ_enKW234KW234&q=upgrade+11%2e0%2e3+to+11i], you will find many articles written by people who share their experience with this upgrade.

• secconf.Sql. If it will work for upgrades or only for new databases?

  Hello
  
  I'm reviewing oracle 11g features and found that few things need special attention, such as checking the settings and the changes in the default profile.
  
  Looking at the secconf.sql file, I found this note
  
  REM only invoked for databases of newly created, not for upgrade of databases
  
  My question is
  (1) if I update a database to Oracle 10 G to Oracle 11 G, will, these changes in profile by default and the audit take place or not?
  (2) these 11 G changes will happen if we create new databases using DBCA?
  
  Thank you
  Delphine

  If you take a peek of scripts by calling secconf.sql in 11.2 /rdbms/admin, you see that secconf.sql can be run from catuprgd.sql with the following calling sequence:

  catupgrd. SQL-> catproc.sql-> catpexec.sql-> execseq.sql-> secconf.sql

  You can retrieve it with:

   pwd
  /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/admin
  [oracle@lx01 admin]$ grep secconf.sql *.sql
  execsec.sql:Rem  Only run the secconf.sql script for new database creations, not
  execsec.sql:      :secconf_name := '@secconf.sql';
  secconf.sql:Rem $Header: rdbms/admin/secconf.sql /main/3 2008/10/26 23:05:27 apsrivas Exp $
  secconf.sql:Rem secconf.sql
  secconf.sql:Rem      secconf.sql - SECure CONFiguration script
  [oracle@lx01 admin]$ grep execsec.sql *.sql
  catpexec.sql:@@execsec.sql
  execsec.sql:Rem $Header: execsec.sql 12-jun-2006.13:39:34 rburns Exp $
  execsec.sql:Rem execsec.sql
  execsec.sql:Rem      execsec.sql - secure configuration settings
  [oracle@lx01 admin]$ grep catpexec.sql *.sql
  catpexec.sql:Rem $Header: catpexec.sql 06-jan-2007.20:57:33 rburns Exp $
  catpexec.sql:Rem catpexec.sql
  catpexec.sql:Rem      catpexec.sql - CATProc EXECute pl/sql blocks
  catproc.sql:@@catpexec.sql     --CATFILE -X
  execcr.sql:Rem      Run from catpexec.sql (catproc.sql)
  [oracle@lx01 admin]$ grep catproc.sql catupgrd.sql
  @@catproc.sql --CATFILE -X
  

  Thus, it seems that catupgrd.sql still works secconf.sql. Given that catuprgd.sql is THE upgrade script (see http://download.oracle.com/docs/cd/E11882_01/server.112/e10820/scripts004.htm#sthref3623), it seems that this secconf.sql is still running.

  But this is not the case if you read execsec.sql code and comments:

  Rem  Only run the secconf.sql script for new database creations, not
  Rem  for upgrades or any other reruns of catproc.sql.  The version column
  Rem  in registry$ is NULL while catproc.sql is running the first time
  Rem  on a new database.
  
  VARIABLE secconf_name VARCHAR2(256)
  COLUMN :secconf_name NEW_VALUE secconf_file NOPRINT
  
  DECLARE
     p_version  varchar2(30);
  BEGIN
     :secconf_name := '@nothing.sql';
     SELECT version INTO p_version FROM registry$
     WHERE cid='CATPROC';
     IF p_version IS NULL THEN
        :secconf_name := '@secconf.sql';
     END IF;
  END;
  /
  
  SELECT :secconf_name FROM DUAL;
  @&secconf_file
  

  In the case of database upgrade registry .version $ is not null and above the code will run nothing.sql instead of secconf.sql:

  [oracle@lx01 admin]$ cat nothing.sql
  Rem $Header: nothing.sql 18-oct-2001.09:57:38 Exp $
  

  It is therefore very likely that secconf.sql is not running during the 11.2 database upgrade (I think that the same should apply to 11.1).

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.

  You can run the latest version of iTunes for your version of Windows, but you are not running the latest version of iTunes is available and it's iTunes 12.3. You must run Windows 7 at least. I'm not a Windows user, but I think 7 is newer than XP.

  Check this.

  http://www.Apple.com/iPhone-6/specs/

• Find closed so for which AR transactions is not generated.

  Hello
  
  I want to find the command lines of sales which are closed and for which AR transactions are not generated.
  I tried with the sub query, wanted to confirm if the right thing to do.
  
  ===========
  
  SELECT a.order_number,
  b.line_id
  Apps.oe_order_headers_all a.,
  Apps.oe_order_lines_all b
  WHERE a.header_id = b.header_id
  AND b.flow_status_code = 'CLOSED'
  AND TO_CHAR (a.order_number) NOT IN (SELECT TO_CHAR (interface_header_attribute1) FROM apps.ra_customer_trx_all)
  AND TO_CHAR (b.line_id) NOT IN (SELECT TO_CHAR (interface_header_attribute6) FROM apps.ra_customer_trx_all)
  
  ===========
  
  Thank you
  Prashant

  Thank you. I'm glad it helped.
  Could you please mark my answer as 'Correct' and mark this thread as "response".

  Thank you
  Anil

• Restart ColdFusion 11 Instances starts does not correctly after the server

  Hello, we have after the situation and can't seem to find a fix or a workaround for it. Could you help her?

  On all 4 of our Windows Server 2012 R2 servers running on machines with 8 vcpu hearts vitrual each, we have 10 instances running ColdFusion 11 update 6, instances are the same on all servers of 4, 2 servers are used for testing/qa and 2 for production. On all these servers, after restart servers sometimes starts correctly and need to be restarted manually to start working. It seems that, on average, at any time, instances of 2 to 4 starts not and those who are not the same bodies every time. We look at the log files and we believe that we found that the issue is, but not sure how to get around it, or fix it. When proceedings begin, the following error appears in the log files of the bodies that will not start correctly (see the bottom of this post for the actual journal entries):

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog

  {WARNING: ServerConnector@69f41e78{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind

  As you can see in the logs below, actually startinstances, but when someone goes to CF Admin or try to do something with ColdFusion on these instances, all they see is error 500. Manually restart the instances starts correctly. I think the problem is that the ServerConnector of org.eclipse.jetty.util.log.JavaUtilLog will be started with the port 5500 instead of a random port (in the log files are you see an AVAILABLE argument is used by ColdFusion, when he calls the constructor). I suspect what happens is that when rebooting the server, all services trying to start at the same time and all try the port 5500 first to see if it is available for use. Since there are 8 processor cores, I think some cases on different cores to processors 'meaning' port 5500 is available and try to use it, but pending different instances on core cpu nested calls for actually the port and then others get an exception and cannot recover it. Those manually, restart gives them a new random number as the port 5500 is already used by a single instance.

  The question we have is: can force us ColdFusion instance use different port for this org.eclipse.jetty.util.log.JavaUtilLog of ServerConnector and if not, is there another workaround solution? We tried the underside of things so far, but not of them semm to help. Our tests included stop all instances and try to change settings on a single instance to see if it will use different port for ServerConnectorm of the org.eclipse.jetty.util.log.JavaUtilLog after starting, but he always tries to claim the first 5500 port:

  • Tried to change the jvm for the below arguments. We tried all those who, because we don't know yet which is correct, various documents we found online did not say specifically, this can be done with ColdFusion servers and we are not very familiar with works of the pier or what work is in ColdFusion server. Any of these help to our question:
    -Djetty.http.port = 20003
    -Dorg.eclipse.jetty.http.port = 20003
    -Dorg.eclipse.jetty.server.server.port = 20003
    -Dorg.eclipse.jetty.Server.port = 20003
  • In addition, tried to change the jetty.xml file in the D:\CF11\cfusion\jetty\etc folder (it exists only in the instance main cfusion but other instances), port of the line 139, changed it to 0. There is either no make the difference:
    < name = 'port' > < property name = "jetty.port" default = "0" / > < / Set > "

  This log file is among bodies having a problem during the last reboot of the server:

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.
  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].
  13 October 2015 07:52:04 org.apache.catalina.core.AprLifecycleListener initializeSSL
  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ['http-Apr-8605']
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ["ajp-Apr-8005"]
  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal
  INFO: Starting service Catalina
  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal
  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: from application services
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  INFO: Pier - 9.0.7.v20131107
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  {INFO: started o.e.j.s.ServletContextHandler@3c75e648{/,null,AVAILABLE}
  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  {WARNING: ServerConnector@69f41e78{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  WARNING: org.eclipse.jetty.server.Server@340cadfc FAILED: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:27
  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ['http-Apr-8605']
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ["ajp-Apr-8005"]
  13 October 2015 07:52:40 com.adobe.coldfusion.launcher.Launcher run
  Information: Starting the server to Ms 40448

  This log file is second bodies having a problem during the last reboot of the server:

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.
  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].
  13 October 2015 07:52:03 org.apache.catalina.core.AprLifecycleListener initializeSSL
  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ['http-Apr-8607"]
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ["ajp-Apr-8007"]
  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal
  INFO: Starting service Catalina
  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal
  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54
  13 October 2015 07:52:09 org.apache.catalina.util.SessionIdGenerator createSecureRandom
  INFO: Creating instance of SecureRandom for the generation of using [SHA1PRNG] session ID a [141] milliseconds.
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: from application services
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  INFO: Pier - 9.0.7.v20131107
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  {INFO: started o.e.j.s.ServletContextHandler@37fad941{/,null,AVAILABLE}
  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  {WARNING: ServerConnector@5c29fc94{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  WARNING: org.eclipse.jetty.server.Server@5d5db612 FAILED: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:27
  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:38
  INFO: From ProtocolHandler ['http-Apr-8607"]
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:39
  INFO: From ProtocolHandler ["ajp-Apr-8007"]
  13 October 2015 07:52:39 com.adobe.coldfusion.launcher.Launcher run
  INFO: Starting the Server MS 39425

  This is a log file of 3rd instance having problems during the last reboot of the server:

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.
  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].
  13 October 2015 07:52:03 org.apache.catalina.core.AprLifecycleListener initializeSSL
  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ['http-Apr-8603"]
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ["ajp-Apr-8003"]
  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal
  INFO: Starting service Catalina
  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal
  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: from application services
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  INFO: Pier - 9.0.7.v20131107
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  {INFO: started o.e.j.s.ServletContextHandler@3c75e648{/,null,AVAILABLE}
  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  {WARNING: ServerConnector@69f41e78{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  WARNING: org.eclipse.jetty.server.Server@340cadfc FAILED: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:27
  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ['http-Apr-8603"]
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ["ajp-Apr-8003"]
  13 October 2015 07:52:40 com.adobe.coldfusion.launcher.Launcher run
  Information: Start the server in ms 40095

  Here is log file on an instance that really started properly (one of these instances of work entirely using port 5500, the other uses random ports):

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02

  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02

  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].

  13 October 2015 07:52:03 org.apache.catalina.core.AprLifecycleListener initializeSSL

  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)

  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04

  INFO: Initializing ProtocolHandler ['http-Apr-8608"]

  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04

  INFO: Initializing ProtocolHandler ["ajp-Apr-8008"]

  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal

  INFO: Starting service Catalina

  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal

  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:15

  INFO: ColdFusionStartUpServlet: ColdFusion: from application services

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:15

  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23

  13 October 2015 07:52:26 org.eclipse.jetty.util.log.JavaUtilLog info

  INFO: Pier - 9.0.7.v20131107

  13 October 2015 07:52:27 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started o.e.j.s.ServletContextHandler@718d048a{/,null,AVAILABLE}

  13 October 2015 07:52:27 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started ServerConnector@51efa93e{HTTP/1.1} {0.0.0.0:55598}

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:30

  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646

  13 October 2015 07:52:42 org.apache.coyote.AbstractProtocol start

  INFO: From ProtocolHandler ['http-Apr-8608"]

  13 October 2015 07:52:42 org.apache.coyote.AbstractProtocol start

  INFO: From ProtocolHandler ["ajp-Apr-8008"]

  13 October 2015 07:52:42 com.adobe.coldfusion.launcher.Launcher run

  Information: Start the server in ms 42366

  Here is our current, ShadoMX/util/Flex/SDK/bin/jvm.config file which is used on all instances (the difference for each is the path of the instance and for some arguments of Xms and Xmx different, other parameters are the same) :

  #
  # Configuration of the virtual machine
  #
  # Where to find JVM, if {java.home} /jre there are this JVM is used
  # If not then it must be the path to the JRE itself

  Java.Home=D:/Java/JDK1.8.0_60/JRE

  #
  # If no java.home is specified that a VM is located by searching these locations in this
  order #:
  #
  #  1) .. JRE/runtime /.
  Register # 2) (windows only)
  (# 3) JAVA_HOME env var more jre (IE $JAVA_HOME/jre)
  (# 4) java.exe in path
  #

  application. Home = D: /cf11/INSTANCEPATH

  # Arguments to VM
  Java.args=-serveur-Xms768m-Xmx1024m - XX : MaxMetaspaceSize = 256 m - XX : + UseG1GC - Xbatch-Dcoldfusion.home={application.home}-Duser.language=en-Dcoldfusion.rootDir={application.home}-Dcoldfusion.libPath={application.home}/lib-Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true-Dcoldfusion.jsafe.defaultalgo=FIPS186Random-Dorg.eclipse.jetty.util.log.class=org.eclipse.jetty.util.log.JavaUtilLog-Djsse.enableSNIExtension=false-Dcoldfusion.disablejsafe=true-Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application.home}/lib/axis2,{application.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/flex/j ars,{application.home}/wwwroot/WEB-INF/cfform/jars,D:\\CF11\\Jars\\EAIMessaging , D:\\CF11\\ Jars\\ALLINSTANCES

  Java.class.Path={application.home}/lib/oosdk/lib,{application.home}/lib/oosdk/classes

  # Comma separated list of path for shared library
  /jintegra/bin/international,{application.home}/lib/oosdk/classes/win Java.Library.Path={application.home}/lib,{application. Home} / jIntegra/bin, {application. Home}

  Hi Pawel,

  I note on a system CF11 runs several instances I was looking at a ColdFusion11\INSTANCE\lib\jetty.xml.

  Part of said jetty.xml:

  0.0.0.0

  5500

  300000

  When I edit thrown 'port' section on my localhost CF11 to 5501 jetty.xml and start the coldfusion - error.log says CF11 part:

  October 14, 2015 08:27:18 org.eclipse.jetty.util.log.JavaUtilLog info

  INFO: Pier - 9.0.7.v20131107

  October 14, 2015 08:27:18 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started o.e.j.s.ServletContextHandler@15a081f{/,null,AVAILABLE}

  October 14, 2015 08:27:19 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started ServerConnector@d02caa{HTTP/1.1}{0.0.0.0:5501}

  After changing port 5501 I note CFadmin > server settings > settings summary > save as PDF button works well.

  HTH, Carl.

• Referential integrity does not not for attributes 'user defined '.

  Hello
  
  I have trouble getting the referntial integrity to work with auxiliary attributes. I have a custom scheme I imported to the ODSEE that I would like to have referential integrity enabled for all DN links.
  
  To activate the referential integrity, I have done:
  
  (1) dsconf game-server-prop - h host Ref port - p-integrity - attr:attribute - name-Ref-integrity - attr:attribute - name (it gave me an error if there were spaces around the------so I removed the)
  (2) dsconf game-server-prop - h: host Pei Ref-integrity-enabled port: on
  (3) adds an index for each attribute (equal) in the suffix whetre objects are
  (4) restart the DS instance
  
  Referential integrity works for members, but not one of my custom attributes. I have also no log instance-path/logs/referint file...
  
  Any ideas?

  Yes, pluginarg3 and more should be your attributes syntax DN you want to maintain on referential integrity. You have over 100 separate DN syntax of the attributes that you want to enable referential integrity for? It is waay more than I've seen before.

  You don't want to change the dse.ldif file while the server is in place. If you do, you will lose your changes when the server restarts. I think it's weird that your dsconf command did not work. If you want to solve problems which you can activate the audit log and run the dsconf commands to see what changes the tool brings to the config.

  Maybe this syntax does not work:

  dsconf game-server-prop - h host Ref port - p-integrity - attr:attribute - name-Ref-integrity - attr:attribute - name

  I think I only used the plugin properties to configure this in the past, but to be honest, I usually run just a ldapmodify with an LDIF.

• HOW can I identify which instance is associated with what listener

  Hi all
  I have created a DB instance. Suppose that named 'B '. but there is already another this DB instance. Named 'A '.
  Then, I created a listener instance DB 'B '.
  
  Now, my what, is that HOW can I identify which instance is associated with what listener.
  
  (2) if I create listener can also created service. If I stopped that service and then I can fire the query or Login again, WHAT will be the expected result.
  I tried to ask people of my answer. but not convinced.
  Please help me for this.
  Thanks in advance

  856376 wrote:
  Hi all
  I have created a DB instance. Suppose that named 'B '. but there is already another this DB instance. Named 'A '.
  Then, I created a listener instance DB 'B '.

  Now, my what, is that HOW can I identify which instance is associated with what listener.

  A listener is able and sufficient to deal with all the instances running on the computer. You are supposed never to create a listener instance. So in your case, the other instance B would be also recorded with the already present litener as well as the existing instance.

  (2) if I create listener can also created service. If I stopped that service and then I can fire the query or Login again, WHAT will be the expected result.

  Have you tried looking in this area and see what would be the expected result?

  Services are a means through which handles things. And when the service would cease, it means that this particular thing also will not work. Now, do you understand what the listener is actually used for? It is intended to listen for incoming connection requests. So if you turned it OFF, you cannot send to your db.

  I tried to ask people of my answer. but not convinced.

  Before asking people, please read the documentation that covers all these things in a large part. Check it out at http://tahiti.oracle.com.

  HTH
  Aman...

• How to identify which instance is associated with what earphone

  Hi all
  I have created a DB instance. Suppose that named 'B '. but there is already another this DB instance. Named 'A '.
  Then, I created a listener instance DB 'B '.
  
  Now, my what, is that HOW can I identify which instance is associated with what listener.
  
  (2) if I create listener can also created service. If I stopped that service and then I can fire the query or Login again, WHAT will be the expected result.
  I tried to ask people of my answer. but not convinced.
  Please help me for this.
  Thanks in advance

  See the listener.ora file. It is usually $ORACLE_HOME/network/admin/listener.ora

  You can see what listener is associated with a file.

  Details will generally be like this

  >
  LSNR1 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = instance1)(PORT = 1666))
  )
  )
  )

  LSNR2 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = instance2)(PORT = 2666))
  )
  )
  )

  >

  >
  If I create listener can also created service. If I stopped that service and then I can fire the query or Login again, WHAT will be the expected result.
  I tried to ask people of my answer. but not convinced.
  >

  A listener is used when a client wants to connect to the database server. If you connect directly to the server without using the name of the instance, then you can connect even if you stop the service.

  Check it,

  C:\Windows\system32>lsnrctl stop
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.3.0 - Production on 03-MAY-2011 23:06
  :22
  
  Copyright (c) 1991, 2006, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  The command completed successfully
  
  C:\Windows\system32>sqlplus ganesh
  
  SQL*Plus: Release 10.2.0.3.0 - Production on Tue May 3 23:06:36 2011
  
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  
  Enter password:
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  SQL> select * from dual;
  
  D
  -
  X
  
  SQL>
  

  But if you try to connect from a client, or use the name of the instance, while connectineg
  you get the error like that,

  SQL> conn ganesh@ganesh
  Enter password: ******
  ERROR:
  ORA-12541: TNS:no listener
  
  Warning: You are no longer connected to ORACLE.
  SQL> 
  

  If you see, I used the name of the @ganesh instance.

  G.

• Drive HARD recovery does not not for Satellite Pro L450D-12 x

  I have a laptop that I'm fixing for a friend.
  According to toshibas official specification it is than a HDD recovery partition which is hidden.

  For a reason unknown to me, now the 0 (zero) key does not work. F8 does not work either and the windows system restore does not seem to get me there either.

  Can someone please explain to me why this is happening?
  Nobody ever touched the hard drive on the alleged recovery hidden partition which is toshibas official specs 100%...

  Anyone share a few ideas with me here please

  Kind regards
  Andrew

  Hello

  The HARD drive recovery partition is not hidden
  In my case the image files when placed on the second partition in Toshiba HDD folder.

  However, the fact is that HARD drive recovery could be launched by pressing the F8 key, and then choose the option called repair my computer and in a new window the recovery HARD drive option should be chosen.
  If this is not possible, then you will need to retrieve the laptop using the recovery disk.

  I guess that this disk is not created in the past. Right? You can create the disc using the recovery disk creator which is preinstalled on all Toshiba laptops.

  If this is not possible, then you must order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

• which is the last driver for a Canon PowerShot G3 camera

  Plug in the cam and even putting the CD installation does not detect my pc I

  Hi ELILara,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you