No mouse pointer at the start of the games (WoW, Eve, Crysis)

Similar Questions

• Second the mouse pointer to the center of the screen of Windows 8 (office and metro) - Sony VaioT Ultrabook

  After a few updates MSFT uncontrolled or without reason, the boot of Win8 poster now the gray circle or circle with the mouse pointer in the Center on the login screen of the touch screen. Try moving the pointer with touchpad shows second pointer, and the original remains flashing in the Center. By connecting to the Metro interface, the cursor of the Center remains in the Center, and it is possible to move subway tiles by dragging the screen.

  When you go to the office, the pointer to the Center rest sometimes, sometimes disappears; When there, open and close the Task Manager without doing anything he removes the unwanted pointer. When removing the additional pointer in the Center, office does not respond to tap and double tap. and does not show the rectangle of the area of selection, as he usually did. However, the touch screen digitizer apparently works as the key, and touch multi-touch show shadows in the points of contact. It also allows to scroll the text in the browsers to slide the touch screen. But the zoom and the valves do not work.
  I also noticed that a few seconds after that the Office will appear on the screen, the touchscreen works as he used before (look and work area selection), but they stop working after 3-4 seconds and you can only take account of the points of contact and scroll the text in browsers (no resizing)...
  Device Manager displays the digitizer as 'USB input device' USB\VID_04F3 & PID_0018; It is impossible to find the name of the vendor or update the driver. The device also creates objects of device HID four children. The digitizer can be stopped and restarted from the Device Manager; upon restart, the Center pointer appears again, or a white square is displayed. Touch the place goes the arrow-shaped pointer in the gray circle of key indicator in the center of the screen. Open and close the Task Manager remove the pointer from the Center.
  Sometimes, when you move a pointer 'true' with the touchpad as the arrow in the Center pointer is replaced by a helping hand or cheek two arrows.
  It seems that there is an application or a service that loads with office and seizes 'touch down' messages, do not let them be served by gui. However, I don't find anything unusual in starting programs or services; Virus scan shows that the machine is clean.
  I thought it might be a ClassicShell likely to interfere, but removing it does not change the behavior. Neither the removal of all the utilities of the startup list startup.
  It is a software problem, suggestions, which could bring him or how to find the root cause of the problem are appreciated.
  I saw a similar description of the behavior on the forums of Sony, but there was no resolution.

  FIXED! My laptop had this problem from day one.  I found a thread where some people had fixed it by going into the properties of the mouse and two enabling paths (shortest path setting was OK and barely perceptible) or by changing the standard display cursor to enlarged (or black).  But this does NOT work for me.  Here's what worked completely:

  I turned off the touch screen.  Who needs him--it was a stupid idea of Windows 8, in any case, and the compromise to solve this question "cursor ghost" was worth WAY.

  Go to Device Manager.  Under Interface devices, there are 2 lines for input USB device.  (If there is more, temporarily disconnect the receiver wireless mouse or another USB input device).  Disable the first, one in right-clicked on it and selecting Disable.  And the problem is GONE!  I hope this helps.

  Maybe the screen had a defect that makes act like an invisible finger relying on, or more likely, it's a Windows 8 bug affecting some machines.  In any case, it's a huge relief to see it fixed, because the cell phone was horrible, when this happened.  Good luck!

• Why my mouse pointer on the screen?

  When I went through my mouse pointer on the screen,

  away from what I do during the video, I am running Windows XP

  w/office

  You are using a laptop with a touchpad? If so, I guess you hit during the navigation. You have not provided all the details, so it's a bit difficult help.

• Windows Vista - blank screen with only the mouse pointer at the start - tried everything

  My laptop (Dell Latitude E6500) stopped recently begin correctly recently - one morning, he froze connection so I powered it off and then on again. When he started to I only got a backlit black screen with a mouse pointer - nothing works, clicking or Ctrl Alt Delete.

  So far I have tried the following:
  • Dell Diagnostics tool - no problems found
  • Safe mode - the same thing happens in all modes of security
  • Restore the system using CD of Vista - no restore point
  • Repair the system using the Vista CD - no error
  • Essentially, nothing to do with the Vista CD solved the problem, so I tried the forums

  • I tried to rename the "Logs_bad" event logs and by creating a new "Log" folder in windows\system32\winevt\ - does not set it
  • "I renamed' software ' to 'software_bad' in windows\system32\config\ and 'software_previous' in 'software', as suggested Mr. Bakir in http://www.nuonsoft.com/blog/2009/05/02/possible-ksod-black-screen-of-death-solution-for-windows-vista/, but it did not work.
  • I also tried a few things with Regedit but not had any luck with doing work again.
  • I tried the trick of "StickyKeys" discussed on many forums, but this does not work - I had turned it off or the computer is not grateful for entry; I do not know
  • I copied explorer.exe working copies, taskmgr.exe and winlogon.exe from a broken computer work computer, it did not resolve anything.
  Are there solutions more I can try? There must be something I can replace/remove/change in order to get Starter beyond this point where is seems to 'block '.
  Install a fresh windows isn't really a preferred option.
  Any help would be much appreciated

  Hello

  ·         At what stage of startup you get this black screen?

  I suggest to refer to the link below and check if it helps to resolve the issue.

  http://support.Microsoft.com/kb/977675

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope that helps!

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Recent update win7 XP. could hover the mouse pointer over the button of brand-pages-bookmarks would be open.

  mouse pointer hover on brand-pages-bookmarks button would open - low-point drop in a folder in the list would be open for more bookmarks.
  How can I restore feature. It was very practice-not by clicking on

  Hi montee11,
  Maybe it's the menu of bookmarks? You can activate the menu bar in Firefox by:

  1. By clicking on '3' menu bar
  2. Click on + customize
  3. Show/hide toolbars and select Menu

  Placing the cursor on the Favorites button on the toolbar is more open automatically, but it opens when I click.

• If I let the the mouse pointer over the taskbar, it freezes and I can't move.

  original title: freezing of funds...

  If I left click on the desktop and then click on the task bar when I got on my pc and leave the pointer from there in the taskbar until the next time I use my computer, it works well. If I let the pointer anywhere on the desktop when I finished work and the mouse pointer will freeze right where he is and I have to restart maually in order to release it. I never met this case in the 20 more years that I have been using a pc.

  I downloaded and ran spybot search and destroy program majorgeeks.com and it fixed my problem of gel. I don't know what he did to take care of it, but it does the trick.

• Windows will not work stopped... it crashes with just a mouse pointer and the blue screen.

  Windows will not be stopped.  Laptop crashes with blue screen and a mouse pointer.  This laptop has XP Professional SP3.

  Look in the event log to see if any errors are recorded.  Install the Service Profile Hive Cleanup (UPHClean) Microsoft and see if things improve.  See here for more information:

  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based:

  http://support.Microsoft.com/kb/837115

  John

• Turn off the mouse pointer in the Web Widget

  Hi people.

  I have a web widget, however when you get a mouse pointer.

  Is there a way to turn it off and just make the selectable items?

  Thank you very much

  Jason.

  You have a tutorial on BlackBerry Development Knowledge Base:

  http://supportforums.BlackBerry.com/T5/Web-development/how-to-use-the-new-navigation-mode-in-a-black...

• The mouse pointer is INVISIBLE when you browse games!

  I like to play games on my computer Windows 8 but that is finished since my mouse pointer is completely invisible and I can't navigate the game or make choices.

  [Moved from comments]

  If your mouse works correctly on all the rest, the normal conditions of use and games except Farm Frenzy, I can only conclude that there is something in their programming that is causing the problem.  Their program may not really win 8 compatible as they claim.  Do not play.

• Change the mouse pointer to the location of the bearing

  I'm working on Excel/simulations for training, and at some point I want to ask the students to resize a column by clicking twice between the column headings.  When they do this in Excel, the cursor turns into a 'sign with the arrows on the sides' to signify that they are on the exact point.  I can insert a rollover image to this place that shows the correct cursor type, but it is display the image at that location, while the mouse pointer remains hand.

  Is it possible in Captivate 9 to force the mouse pointer to change the specific locations of flipping?

  If the output is HTML5 you can do it with CpExtra as explained here:

  About the mouse | Infosemantics Pty Ltd

• How to stop the circle of blue on the mouse pointer when the machine turns off

  Regarding Photosmart 5510e printer all in one product No.CQ183B... Model No.B111h... Serial number {content removed}

  Cannot get rid of the attatched blue circle to the pointer of the mouse when the computer is turned off, because it is the noisiest printer that I have ever bought, it even guard the neihgbours awake. Thers seems there have much the same complaint of the HP printer owners concerning the blue circle. Advice please, thank you jh

  Most likely the computer is looking for the printer for features such as Scan computer and alerts the ink. Disable these features should stop the blue circle of projection. Double-click the printer on the desktop icon to open the Printer Wizard. Double-click the ink level chart found at the top of the window. Click the Advanced tab. Under Alerts ink make sure the box "only when I print" is selected, and then click close at the bottom of the window. Double click on manage the Scan of the computer. Click on disable. Close all open windows. This should stop the computer from looking for the printer when it is turned off. Let me know what happens.

• Change the mouse pointer in the simulation?

  Hello

  is it possible to change the appearance of the pointer mouse in a software simulation (on a single slide)?

  I got to change the pointer in demo mode.

  Kind regards

  Jurek

  Sure.  Simply select the subject of the mouse on the slide where you want it to be different and then select another pointer in the Options tab.  If you want to use a pointer that is not listed, you can click the Browse button to navigate to a cursor file replacing. Please note that the format must be .cur, not just a graphic file.

  If you want to get really creative and change the mouse cursor for something completely different, maybe it replaced with a graphic file, it is also possible using a widget.

• How to stop a brake if the mouse pointer leaves the scene?

  Hi all

  I have a big dot on the screen which can be moved around the mouse. I simply put an invisible button in the article with:

  {We (Press)}

  this.startDrag ();

  }

  {We (Release)}

  this.stopDrag ();

  }

  But if I move the mouse outside the stage area by dragging the element and release the mouse button release is not detected and the trail remains on and I have to get the pointer to the scene and click and hold the button to stop the operation slide.

  Is it possible to disable a brake when the mouse is released outside the bounds of the scene, perhaps using a different method that does not rely on a button?

  Any help is appreciated!

  Just change your bit of code and you will get it. I pasted the source code update have look on this

  {We (Press)}

  this.startDrag ();

  }

  {On(Release,releaseOutside)}

  this.stopDrag ();

  }

• How to change the mouse pointer to the loading slider

  Hi all.

  In my program, on a press of button I am loading some graphic files that take up to 4-5 seconds. During this time, I want to change the cursor of the mouse to load the cursor of the mouse as a circle of rotation as in windows. What should be the way to do this?

  Kind regards.

  (1) take a look at the help, if you're looking for the mouse cursor will show you the function SetMouseCursor

  (2) it would be also nice to you provide comments - so far all of your previous questions were answered by various participants of this forum - it's more fun to help if you see from time to time a small "thank you"...