No network after a power failure and only works in safe mode with network. Operating system is Vista SP2.

Similar Questions

• WiFi MiniPCI card only works in "Safe Mode with network.

  AR5001Xplus MiniPCI card only works in "Safe Mode with network" (windowsXP-Home-SP2 and all updates recent).
  In 'normal' mode, it freezes my laptop after a few seconds.

  Hello

  Why you don t give us more information about your problem? We don't know what unit you have? Is the original part of card or you have built at least?

  At the moment I can just recommend you to reinstall the unit with recovery media. If the problem persists, try to install the card separately with the right driver. Otherwise, you must change the WiFi card or test it with the other.

  Give us more information.

• my internet only works in safe mode with networking

  my internet works that in safe mode with networking, in the configuration of the system, I have disabled all services except the microsoft one, my network connection shows always "no network connection" in normal mode.

  Initially, there was a time when my internet worked in normal mode for some time, but his does not work even for a minute in normal mode.

  Hi Nawnit,

  I want to collect certain information to help better the issue on Internet Explorer:

  (1) what happens when you try to access the Internet in normal mode on the computer? You receive an error message?

  (2) don't you make changes to the computer before this problem?

  This problem could be due to changes in the Internet connection TCP/IP settings.

  We will try to reset the TCP/IP and WINSOCK eset using the command line (admin mode).

  Follow the steps to do this:

  (a) type "cmd" in the start screen. Right-click on command prompt and select "Run as Administrator".

  (b) type the following command and press ENTER:

  netsh winsock reset
  netsh int ip reset log.txt

  (c) restart the computer.

  It will be useful.

  Just reply to us the status of this issue. We will be happy to help you.

• Firefox started crashing everytime I start it and only works in safe mode

  Fire Fox now crashes every time I try and start it, one afer several attempts at a normal departure allows me to start in safe mode, it just happened in the last 24 to 48 hours. Not added new extensions, wants to be able to use FireFox again

  Did you close and restart Firefox or possibly restart the computer

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  See also:

  • bug 812683 - crash to boot from Win7 to _d2d_clear_surface @ CContext::RestorePipelineStateImpl (d3d11.dll, after the installation of KB2670838)

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• My Acer Aspire 4736ZG stop each time I start and will work in safe mode

  This problem has been some time now. Whenever I turn on my computer notebook (Acer Aspire 4736zg) close at boot (windows loading screen) and it really means not freeze SHUT DOWN or restarts... He likes to lose power. It only works in safe mode. Installation of Windows 7, 8 CD cannot start (stop as above).
  I did everything: fixing driver, scan virus, chkdsk, update BIOS even install new windows... The problem still there. I tried install Joli OS (Linux) to have a chance but does not work (always closed).

  All ideal for my problem?

  P/S: sorry for my English

  At this point no matter what the problem he is going to need repair. If it happens with more of an OS which pretty much eliminates the possibility of a software problem. I would still say that it is probably overheating, or there is a problem with your graphics card. However, you will need to speak with Acer on this one.

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• Firefox crashes at startup, only works in safe mode

  Hello.
  As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

  That's what I've tried so far, but it did not work:

  Restored Firefox.
  
  Reinstalled Firefox and also delete my profiles.
  
  Hardware acceleration disabled.

  These are my recent incident reports

  bp-114dcdff-7b46-425b-8ec0-478102140218
  bp-464d26b6-4530-4230-8e4f-5000e2140218
  bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
  bp-6a0e5565-1f66-4606-8c29-8ac292140218

  Thanks in advance, I hope you can help me.

  Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

  There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

  Here are two reports of incidents on the problem:

  BP-a257ee60-b8d6-495c-82a3-605572140218

  BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

  Thanks for your help and sorry for my English.

  EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

• Graphics card only works in Safe Mode

  Just did a clean install of Windows 7 and when re - installing the latest drivers Nvidia drivers do not work. I have a Nvidia GTX570 finds ok computer. I can only run in safe mode with the base windows graphics drivers so think the card works ok? can someone help?

  Install and run the uninstall of the display driver, I remove all items from nvidia.

  Uninstall the display driver.  http://www.Guru3D.com/files-details/display-driver-uninstaller-download.html

  Restart the computer.

  Install the latest java.

  http://Java.com/en/

  Visit Nvidia Auto detect Graphics.

  http://www.nvidia.com/download/scan.aspx?lang=en-us

• LCD monitor only works in safe mode

  I connected a new monitor and will work in safe mode. I tried to change all the settings in safe mode but nothing seems to work when I restart the computer in normal mode. Help, please

  I'd like to see if you can install any software that came with your monitor.

  There is another option to enter in Windows Vista, choose activation lower-resolution (640 X 480)... .or the VGA mode as it used to be called.

  Try to install the drivers in safe mode if it does not work.

  If these don't work, let me know the exact model you new monitor so I can see if I can find any known issues.

  Mark <> Microsoft Partner

• Re: Toshiba L305 Satellite 1) screen is messed up and only start in safe mode

  * HELP! *

  Windows starts only in safe mode or safe mode with network. My screen is messed up (black and gray with horizontal lines and the screen looks like it scrolls continuously).

  I connected the laptop to an external monitor and it still does not start normally and I need to recover contacts from my iphone from itunes.

  Is there something I can do? I really don't want to lose all my contacts! I have to remove the hard drive and it burst in another machine and try to start windows normally to have access to my current drive with all the data that is on it, but I don't know if it works or if it's a bad idea.

  What could be causing the screen get all dirtied upwards and at the same time windows does not start normally? I have never had a virus before problems!

  Help! Thanks :)

  Hello

  > Windows will only start in safe mode or safe mode with networking

  It seems that the bootmanger is corrupt or something like this

  > I really don't want to lose all my contacts!

  I know, I Safe mode, you have access to all data on the hard drive. So, you can move all the important data on USB or on the partition (if available) 2 nd on your hard drive and you don't need to remove the hard drive
  Then you can reinstall Windows with a recovery disc or by using the disk copy of Win. This is the best solution in your case, try to fix windows can take a lot of time as a new installation.

• Mouse and keyboard only work in safe mode... why?

  Or work on restoring normal operation and all the images are blurred. Said one-stop two players work under ms - back! Someone help me?

  If it works in safe mode it looks like it's the drivers. because in safe mode, it uses only basic MICROSOFT DRIVERS... go in safe mode, go to the DEVICE MANAGER (right click on computer and click on MANAGE then click on allow or continue if prompted, and then click Device Manager).

  under the heading of the keyboard device, click on the '+' and then right click and uninstall all THE items in the CATEGORY of the KEYBOARD and click OK on all messages

  then

  under mouse/mice and other input devices , click on the '+' and then right click and uninstall all THE items in the CATEGORY of the mouse/mice and other input devices and click OK on all messages.

  Then

  Reboot and allow devices to relocate

• start-up after norton install fails can only start in safe mode

  I don't know how this problem started, I got a blue screen on startup, start single icould my pc in safe mode.

  The only way I could use my pc was to do a system restore.

  At this point, I have lost Norton 360 v 3?

  I contacted norton and they have been very helpful, they re-installed norton remotely.

  they are just me to reboot my pc

  My pc is restarted, I got the blue screen and could only restart in safe mode, I had to again, restore the system to get online and I lost norton, but the Startup icons are still there.

  The problem may be caused by the incompatible Norton (Symantec) with the hardware or software you installed recently.

  Uninstall Norton (Symantec) in Mode completely safe
  

  ==========================================

  1. reboot the computer and start pressing the F8 on the keyboard key. On a computer that is configured to start to multiple operating systems, please press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any user account with administrator privileges.

  To uninstall Norton Internet Security, please run Norton Removal Tool.

  Note: If the following tool cannot be downloaded via Safe Mode, I suggest we first download it on a different computer and then copy it to the problematic original computer to install it.

  4. Please visit the following Web site to download the tool:

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  5. save the tool for Windows Vista desktop.

  6. run the tool according to the instructions on the Web site.

  7 restart the computer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• blue screen - only works in safe mode

  I have a 1545 inspiron 1545 lap top only woks in safe mode are tried system don't restore chance andre, I can do?

  [Moved from comments]

  Hi Tony,

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  1. what operating system is installed on your computer?

  2. What is the code in the exact error message or Blue Screen of Death?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

  I also suggest you follow the steps mentioned in the link below which may help you in the matter of fixing.

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

  1. click on Start, point to settingsand then click Control Panel.

  2. double-click on system.

  3. click on the tab Advanced and then click settings under Startup and recovery.

  4. in the Write debugging information list, click partial dump (64 KB).

  For reference:

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

  I hope that the information above helps you.

• computer only works in safe mode

  Happens to Windows Logo and crashes, does not work in safe mode have lost Admin VAC and can't do a restore
  point

  madmacca,
  We could use a little more information.

  What version of Windows and service pack level are you?
  Do you have an error message, and if yes what is it?
  Nothing changed prior to the show starting (hardware or software)?

  When you start in Safe Mode, a minimal boot and will see if this you start normally.
  Here is information on the clean boot: http://support.microsoft.com/kb/310353

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reset my computer worked firefox now crashes at startup even after installation clean single ad on ms silverlight without outdated programs only works in safe mode

  My computer is fundamentally new. I have Avast anti virus, steam (CS sims3 + animals domestic only games installed), Google Chrome (installed with avast), Magic iso, WD my cloud (for my home network cloud) server software, Microsoft silverlight and who he is. Firefox starts in safe mode, I tried to clean install of the latest version and research updates in safemode, my adobe plugins are up-to-date, I disabled everything else. The only sites I've visited in firefox are Facebook to connect and save my password clicked on any link, Netflix to find the Silverlight plugin, Gaia online to save my password. That's all now it does not start without crashing into any other mode, which can make.

  You have hardware acceleration disabled in your old profile and now he allowed in the new profile that was created due to the discount to zero/update.

  You can start Firefox in Safe Mode by holding down the shift/Options key.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration