Firefox started crashing everytime I start it and only works in safe mode

Similar Questions

• No network after a power failure and only works in safe mode with network. Operating system is Vista SP2.

  The latest patch to update this system was .net framework 4

  This behavior has occurred on several machines after a power failure in our factory caused all systems restart.

  I have run chkdsk

  I ran sfc

  SafeMode internet works fine.

  Clean boot does not solve the problem.

  Cannot remove .net framework 4 because I can't get windows installation service to work properly.

  X red on the connection in normal mode

  I run with the reset.cmd file subinacl to reset all the registry settings. It gave no results.

  I looked at all of the services that are running successfully in normal mode and those that are run in mode safe and that services to start. This got me internet again in normal mode, but we are far from finished there are a lot of services is still needed. I'll make one by an approach to see what will begin and what doesn't.

  System Restore was successful, but had no bearing on the issue. Here's the solution that worked.

  Safe Mode boot

  on computers that are running Windows live onecar I ran as administrator onecare removal tool

  Remove the Adobe Flash 10 utility

  Open msconfig and services.msc

  enable all services that are running in safe mode to run msconfig on the next reboot. Also enable required services for Windows updates and windows install

  Enable

  BITS, com +, Windows udpate, workstation and service server and all dependent services. If you miss some that is good because you and individual services and start them from services.msc when the next restart.

  Restart the machine.

  I found that after this reboot a few updates have been posted in the update list installed in the control panel that had not been previously listed.

  Remove all instances of Java (cannot be done in safe mode)

  Reinstall Java and flash player from their respective Web sites

  I installed Microsoft Security Essentials www.microsoft.com/security_essentials

  Run windows update and install the updates.

  run msconfig and select normal startup

  Restart and ensure normal operation.

  It takes about 1/2 hour, 1 hour per machine which was much lower than a full reinstall.

• My Acer Aspire 4736ZG stop each time I start and will work in safe mode

  This problem has been some time now. Whenever I turn on my computer notebook (Acer Aspire 4736zg) close at boot (windows loading screen) and it really means not freeze SHUT DOWN or restarts... He likes to lose power. It only works in safe mode. Installation of Windows 7, 8 CD cannot start (stop as above).
  I did everything: fixing driver, scan virus, chkdsk, update BIOS even install new windows... The problem still there. I tried install Joli OS (Linux) to have a chance but does not work (always closed).

  All ideal for my problem?

  P/S: sorry for my English

  At this point no matter what the problem he is going to need repair. If it happens with more of an OS which pretty much eliminates the possibility of a software problem. I would still say that it is probably overheating, or there is a problem with your graphics card. However, you will need to speak with Acer on this one.

• Firefox crashes at startup, only works in safe mode

  Hello.
  As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

  That's what I've tried so far, but it did not work:

  Restored Firefox.
  
  Reinstalled Firefox and also delete my profiles.
  
  Hardware acceleration disabled.

  These are my recent incident reports

  bp-114dcdff-7b46-425b-8ec0-478102140218
  bp-464d26b6-4530-4230-8e4f-5000e2140218
  bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
  bp-6a0e5565-1f66-4606-8c29-8ac292140218

  Thanks in advance, I hope you can help me.

  Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

  There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

  Here are two reports of incidents on the problem:

  BP-a257ee60-b8d6-495c-82a3-605572140218

  BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

  Thanks for your help and sorry for my English.

  EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• Mouse and keyboard only work in safe mode... why?

  Or work on restoring normal operation and all the images are blurred. Said one-stop two players work under ms - back! Someone help me?

  If it works in safe mode it looks like it's the drivers. because in safe mode, it uses only basic MICROSOFT DRIVERS... go in safe mode, go to the DEVICE MANAGER (right click on computer and click on MANAGE then click on allow or continue if prompted, and then click Device Manager).

  under the heading of the keyboard device, click on the '+' and then right click and uninstall all THE items in the CATEGORY of the KEYBOARD and click OK on all messages

  then

  under mouse/mice and other input devices , click on the '+' and then right click and uninstall all THE items in the CATEGORY of the mouse/mice and other input devices and click OK on all messages.

  Then

  Reboot and allow devices to relocate

• Reset my computer worked firefox now crashes at startup even after installation clean single ad on ms silverlight without outdated programs only works in safe mode

  My computer is fundamentally new. I have Avast anti virus, steam (CS sims3 + animals domestic only games installed), Google Chrome (installed with avast), Magic iso, WD my cloud (for my home network cloud) server software, Microsoft silverlight and who he is. Firefox starts in safe mode, I tried to clean install of the latest version and research updates in safemode, my adobe plugins are up-to-date, I disabled everything else. The only sites I've visited in firefox are Facebook to connect and save my password clicked on any link, Netflix to find the Silverlight plugin, Gaia online to save my password. That's all now it does not start without crashing into any other mode, which can make.

  You have hardware acceleration disabled in your old profile and now he allowed in the new profile that was created due to the discount to zero/update.

  You can start Firefox in Safe Mode by holding down the shift/Options key.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• 01/07/13 KB6270838 Microsoft update causes Firefox to crash. Only works in safe mode. Fix inside.

  How to fix:

  Uninstall Microsoft Update KB6270838 by going to control panel
  Click on Windows Update
  Click view update history
  Click on installed updates
  Access to the area called Microsoft Windows and find the KB6270838 update
  DoubleClick and select uninstall.

  reboot and everything works again.

  Resolved in the original post.

• HP SlimDesktop 450-a114: keyboard and mouse only work in safe mode

  When that I starts normally, the keyboard and the mouse do not work and I can not connect.

  If I boot in safe mode, the mouse and keyboard and I can open a session.

  In safe mode, when I go into Device Manager, the device of keyboards is "HID Keyboard Device" and the mouse device is "mouse HID-compliant".  What should I do?

  Thank you

  Mike

  If it works in Mode safe is probably a driver issue because Safe Mode doesn't load any third-party drivers.

  I suggest that you go into Device Manager"and uninstall the keyboard and the mouse. To restart Windows will detect the keyboard and mouse and reinstall the drivers, I hope as fixing the problem.

  * You didn't say what version of Windows you use, so I could not be more specific on how to access the Device Manager.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• the computer restarts on startup and then only works in safe mode

  I'm running out of options.

  I have a MSI all in one pc which runs on windows vista Basic. I turn on my computer and it will show my lock screen, but just before I can type my password, it restarts itself and give me different options of safe mode. I tried a lot of different solutions, but none of them seem to work. Can anyone help me, please.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you already know)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• using the computer and windows xp professional will only work in safe mode.

  After a windows update from one day to the next on 4/4/windows had restarted in safe mode.  Have tried everything I can, but is still unable to operate in something else than to safe mode.

  Hi Grandma fla,.

  Please describe what is happening when you try to start the computer in normal mode. Please provide the exact error message received, if any. Alternatively, you can perform a System Restore Mode without failure.

• computer blocks only works in safe mode and error blue screen BCCode: 116

  specifications of the computer.
  Windows vista Home premium 32-bit
  Error Msg

  -stop enexpectedly

  Signature of the problem

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)

  Mini052711 - 01.dmp

  SysData. XML

  Version.txt

  See a temporary copy of these files

  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem

  BCCode: 116

  BCP1: CF 892 008

  BCP2: 90B 22036

  BCP3: 00000000

  BCP4: 00000002

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Information about the server: 2528169f-3730-4b08-b413-9ffae78c8aa8

  Hi Manju,

  Remember to make changes before this problem?

  If the computer works fine only in Safe Mode, then some present third party software on the computer may cause this problem.

  
  Method 1: activate the boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: you can follow the steps described in the article below, which addresses the problem of blue screen

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

• my computer only works in safe mode and will not start in normal mode I have no virus, what could be the problem

  I get the blue sreen with theses messages
  0 x 0, 00000000 00000001

  I get the blue sreen with theses messages
  0 x 0, 00000000 00000001

  I don't know what your problem is, but I would point out that when you say "I have no virus", you could very well be wrong

  No antivirus program is perfect, and the more popular (Norton and McAfee) are among the worst. Just because they do not catch something doesn't mean you're not nfected.

  In addition, more virus there are other types of malware, such as spyware, and even if you have no virus, you could be infected with spyware.

  For an anti-virus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one (do not run more than one) of the following three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software (even if you run a program like Microsoft Security Essentials, with anti-spyware feature integrated into it). I recommend that you download and
  install MalwareBytes AntiMalware (freeware)

• Windows does not start in normal mode after the Trend Micro update a few days ago. I can only work in safe mode. Whenever it freezes in normal mode just after typing my password. Help, please.

  Trend Micro update

  If the information below does not help, contact Trend Micro because it is their product that caused the problem:

  http://eSupport.trendmicro.com/default.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• My Firefox will only work in safe mode, even after uninstall and reinstall

  I am running Windows7 and it comes crashing in the middle of the day. I tried to uninstall and reinstall with the same result. I've updated all Windows updates. The same problem. No idea what the problem is.

  You are welcome